Video Blog Cooling Comparison: EXAIR’s 2″ Super Air Amplifier vs. Fan

Super Air Amplifier

EXAIR‘s line of Adjustable and Super Air Amplifiers are the ideal solution for cooling hot parts. Using a small amount of compressed air, they’re designed to entrain massive amounts of free ambient air from the environment. This free air mixes with the primary air stream, achieving entrainment ratios of up to 25:1!

To demonstrate the dramatic difference between the Super Air Amplifier and a standard fan, I created a side-by-side video of the two. Using the 2″ Model 120022 Super Air Amplifier at just 40 PSIG (9 SCFM air consumption) check out just how effective we were at cooling down a stainless steel block:

When fast cooling of a hot part is necessary, look no further than EXAIR’s Adjustable and Super Air Amplifiers. They’re all in stock and can ship same day to the US & Canada with an order placed by 3:00 ET!

Tyler Daniel
Application Engineer
E-mail: TylerDaniel@EXAIR.com
Twitter:@EXAIR_TD

 

Air Entrainment & EXAIR’s Intelligent Compressed Air Products

Air entrainment is a term that we bring up quite often here at EXAIR. It’s this concept that allows many of our products to dramatically reduce compressed air consumption. The energy costs associated with producing compressed air make it an expensive utility for manufacturers. Utilizing engineered compressed air products that will entrain ambient air from the environment allow you to reduce the compressed air consumption without sacrificing force or flow.

Entrainment
EXAIR Intelligent Compressed Air Products such as (left to right) the Air Wipe, Super Air Knife, Super Air Nozzle, and Air Amplifier are engineered to entrain enormous amounts of air from the surrounding environment.

Products such as the Super Air Knife, Super Air Nozzle, Air Amplifier, and Super Air Wipe all take advantage of “free” air that is entrained into the primary supplied airstream. This air entrainment occurs due to what is known as the Coanda effect. Named after renowned Romanian physicist, Henri Coanda, the Coanda effect is used in the design of airplane wings to produce lift. As air comes across the convex surface on the top, it slows down creating a higher pressure on the underside of the wing. This creates lift and is what allows an airplane to fly.

nozzle_anim_twit800x320
EXAIR Super Air Nozzle entrainment

This is also the same principle which is allowing us to entrain ambient air. As the compressed air is ejected through a small orifice, a low-pressure area is created that draws in additional air. Our products are engineered to maximize this entrained air, creating greater force and flow without additional compressed air. Super Air Amplifiers and Super Air Nozzles are capable of up to a 25:1 air entrainment ratio, with just 1 part being the supplied air and up to 25 times entrained air for free!! The greatest air entrainment is achieved with the Super Air Knife at an incredible ratio of 40:1!

This air entrainment principle allows you to utilize any of these products efficiently for a wide variety of cooling, drying, cleaning, or general blowoff applications. In addition to reducing your compressed air consumption, replacing inefficient devices with engineered products will also dramatically lower your sound level in the plant. Sound level in some applications can even be reduced down to a point that would eliminate the need for hearing protection with the OSHA maximum allowable exposure limits set at 90 dBA for an 8-hour shift.

If you have inefficient blowoff devices in your facility, give us a call. An Application Engineer will be happy to help you select a product that will “quietly” reduce your compressed air consumption!

Tyler Daniel
Application Engineer
E-mail: TylerDaniel@EXAIR.com
Twitter: @EXAIR_TD

Types of Air Amplifiers: Amplify Volume or Amplify Pressure

EXAIR Air Amplifiers use a small amount of compressed air to create a tremendous amount of air flow.

As Application Engineers, we help many customers with finding solutions with effective, safe, and efficient EXAIR products.  But, in some instances, we get a request for an air amplifier to increase line pressures.  EXAIR does not manufacture this type of Air Amplifier.  In doing some research on the internet, I was able to find two different types of air amplifiers.  In this blog, I will describe the difference between the pressure-type and volume-type.

The EXAIR Super Air Amplifiers are defined as a volume-type of an amplifier.  They use compressed air to generate a large volume of air flow.  The amplification ratio is the comparison between the inlet air flow and the outlet air flow.  With the EXAIR Super Air Amplifiers, we can reach an amplification ratio of 25 to 1.  They use a Coanda profile with a patented shim to create a low pressure to draw in a large volume of the surrounding air.  EXAIR manufactures a variety of different sizes, materials, and types.  But they all do the same thing, amplify the volume of air.  To give an example, model 120024 Super Air Amplifier has a 25:1 amplification ratio.  It uses 29.2 SCFM (826 SLPM) of compressed air at 80 PSIG (5.5 bar).  So, the outlet air flow is amplified from 29.2 SCFM to 730 SCFM (20,659 SLPM) of air.  This large volume of air works great for cooling, exhausting, and transferring.  But, with any type of amplification, you have to lose something.  With the volume type Air Amplifiers, the outlet pressure is reduced dramatically.

The pressure-type air amplifiers are different from the Super Air Amplifiers as this device will amplify the outlet air pressure, not the volume.  It is an air pump that has a direct dual piston that uses two different diameters.  The larger diameter uses the drive inlet pressure while the smaller diameter is used for the boost pressure.  The amplification ratio is determined by the difference in volume from the drive piston to the boost piston.  They also come in a variety of ranges and sizes.  As an example, an amplification ratio of 15:1 will increase an inlet pressure from 100 PSI (7 bar) to an outlet pressure of 1,500 PSI (103 bar).  Since the pressure-type air amplifier is an air pump, the system has to cycle.  To do this, they use pilot valves to either add the inlet compressed air to the drive piston or to relieve the air pressure from the drive piston.  This cycling portion of the operation does reduce the efficiency of the air amplifier.  The pressure-type air amplifiers are used to generate high pressure for a specific application or area and eliminate the purchase of a high-pressure air compressor.  The applications include air clamps and presses, pressure testing, air brakes, and also blow molding.  Like stated above about losing something with amplifications, the volume of air is reduced dramatically.  Generally, a reservoir tank and over-sizing will be needed for a good system.

The Application Engineers at EXAIR enjoy talking to customers about compressed air applications.  If you need more information about Air Amplifiers, you can contact us directly.  We can explain the volume-type that we manufacture or refer you to a company that makes the pressure-type.  Either way, we will be happy to hear from you.

John Ball
Application Engineer
Email: johnball@exair.com
Twitter: @EXAIR_jb

Custom Air Amplifiers for Special Applications from EXAIR

The EXAIR Super Air Amplifiers and Adjustable Air Amplifiers are used in 100’s if not 1000’s of applications and locations across the world.  For cooling, drying, and cleaning of parts as well as venting and exhausting of smokes and fumes, or dust collection – the Air Amplifiers are sure to get the job done.

The Super Air Amplifiers are made of aluminum and are sized from 3/4″ to 8″ to cover a wide range of applications. Compact and lightweight, no electricity, no moving parts, and instant on/off are just a few of the features.

The Adjustable Air Amplifiers are made of aluminum or type 303 stainless steel and are sized from 3/4″ to 4″, and with adjustable output, provide a wide spectrum of performance.  They have the same great features of the Super Air Amplifier with the added benefit of varying force and flow.

2″ Super Air Amplifier and 2″ Stainless Steel Adjustable Air Amplifier

Even with the wide variety of types, sizes, and materials of construction, a customer may have a special need and there are numerous ways that EXAIR can customize the Air Amplifiers.  I’ll touch on several from the basics to the most complex.

  • The Super Air Amplifiers come with a stock shim that sets the performance seen in the catalog. There are other shim thicknesses available if more or less flow is preferred, and they can be installed at the factory if desired.
  • The Adjustable Air Amplifiers are designed for varying output by turning the plug further in to or out of the body. If there is a performance setting that is preferred, we can test, adjust and set it to meet that performance, allowing to be installed and ready for optimum results.
  • If the use of a special material will increase the benefit of the Air Amplifier, we can explore several options with you. One customer needed an Adjustable Air Amplifier with a PTFE plug to help draw a sticky material through a process and prevent the material from adhering to the surface of the Air Amplifier.
  • For those applications where the Air Amplifier is to be installed into a piping system, custom design with flanged ends can be done. Recent designs include stainless steel Adjustable Air Amplifiers with class 150 raised face flanges, and another with sanitary Tri-Clamp style.

Adjustable Air Amplifier with PTFE Plug, Class 150 Raised Face and Sanitary Tri-Clamp Flanges

  • A special High Temperature version was developed for moving hot air to surfaces requiring uniform heating while in a furnace or oven. This special design is rated for environments up to 700°F and its surface is protected from heat stress by a mil-spec coating process.  This special High Temperature Air Air Amplifier was so popular, it became a standard offering and is in stock!

high temp air amplifier1-1/4″ High Temperature Air Amplifier

For over 35 years, EXAIR has been designing and manufacturing the best performing and highest quality products in the marketplace. If you have a special requirement and in need of a custom solution, we’ve got the experience and history to solve most problems.

If you have questions about Air Amplifiers, custom Air Amplifiers, or any of the 15 different EXAIR Intelligent Compressed Air® Product lines, feel free to contact EXAIR and myself or any of our Application Engineers can help you determine the best solution.

Brian Bergmann
Application Engineer
Send me an email
Find us on the Web 
Like us on Facebook
Twitter: @EXAIR_BB