Performing regular maintenance on your compressor system helps to keep everything operating in peak condition and ensures you’re not wasting unnecessary energy. Just as you perform regular routine maintenance on your vehicles, a compressed air system also needs a little TLC to keep things running smoothly. Neglected maintenance items can lead to increased energy costs, high operating temperatures, and coolant carryover. Much of these issues can be eliminated simply by performing routine maintenance on the components of the system.
According to the Best Practices for Compressed Air Systems by the Compressed Air Challenge (1), components within the system that need maintained include: the compressor, heat exchanger surfaces, lubricant, lubricant filter, air inlet filter, motors, belts, and air/oil separators.
The compressor and all surfaces of the heat exchanger need to be kept clean and free of contaminants. When these components are dirty, compressor efficiency is greatly reduced. Any fans and water pumps should also be regularly inspected to ensure that they’re functioning properly. The air inlet filter and piping should also be cleaned. The quality of the air in the facility will impact the frequency, refer to the manufacturer’s specifications for ideal intervals for performing scheduled maintenance.
The lubricant and lubricant filter must also be changed per manufacturer’s specifications. Old coolant can become corrosive, impacting useful life and damaging other components while reducing efficiency. While synthetic lubricants are available that have an extended life compared to standard coolants, this does not extend the life of the lubricant filter itself.
Belts should be routinely checked for tension (every 400 hours is reasonable) to alleviate bearing wear. Belts will stretch and wear under normal operation and must be adjusted periodically. It’s a good practice to keep some spares on hand in the event of a failure.
End use filters, regulators, and lubricators should also be periodically inspected and filter elements replaced as needed. If left unchecked, a clogged filter will increase pressure drop. This can cause both a reduction of pressure at the point of use or an increase in the pressure supplied by the compressor, leading to increased energy costs.
Another often overlooked maintenance item is leak detection and repair. Leaks contribute to unnecessary air usage, pressure drop, and increased energy costs. EXAIR offers an Ultrasonic Leak Detector that can be used to identify the leaks in your system and allow you to make the necessary repairs.
In order to keep your system running in peak condition, regular maintenance is critical. By paying close attention to the manufacture’s recommendations, and implementing a regular maintenance schedule, you can ensure you’re getting the most out of your system components.
Tyler Daniel
Application Engineer
E-mail: TylerDaniel@EXAIR.com
Twitter: @EXAIR_TD
(1) Scales, W. (2021). Best Practices for Compressed Air Systems : Second Edition (2nd ed.). The Compressed Air Challenge,.
Compressor system image courtesy of Compressor1 via Flickr Creative Commons License
