The Case For The EXAIR Super Air Wipe

If you’ve ever used an air gun to blow something off, you’re familiar with the cleaning ability of compressed air.  If you can get the whole object blown off from where you’re standing, there really is no substitute…but what if you need to get to the other side…or sides?

Even if your product is not on fire, you probably wouldn’t want to “limbo” under it with an air gun…

This is where the EXAIR Super Air Wipe comes in…they allow you to blow a continuous, uniform 360° air stream, all around your product.  Consider their benefits:

*Sizes: the Super Air Wipe’s compact ring design means it won’t take up a lot of room; you just need a few inches, in any direction, to install one.  We stock them in eleven sizes, from 11″, all the way down to our brand-new 3/8″ diameter.

*Durability:  All EXAIR Super Air Wipes are assembled with stainless steel shims and hardware.  Models up to 4″ come with a rugged, stainless steel wire braided hose, connecting the two halves for compressed air supply.

The aluminum Super Air Wipe is available in 11 sizes; the stainless steel Super Air Wipe comes in 5 sizes…all from stock.

*Ease of installation:  Smaller sizes can be supported by the compressed air supply line, if a pipe is used and threaded into the connector hose’s 1/4 NPT port.  Larger sizes can likewise be adequately supported with pipe to both halves. All models have a bolt circle of 1/4″-20 tapped holes for more permanent and rigid mounting.  The split ring design is another key feature:

Simply open the two halves, and clamp them around your product…no threading!

*Corrosion resistance: Depending on the environment in which the Super Air Wipe will be installed, we offer them with aluminum (3/8″ – 11″ sizes) or stainless steel (3/8″ – 4″ sizes) bodies.

*Temperature rating: Aluminum Super Air Wipes are good to 400°F (204°C) and stainless steel models are good to 800°F (427°C.)

*Range of operation: We install a 0.002″ thick shim in all stock Super Air Wipes; this is suitable for a wide range of typical industrial/commercial blow off applications…a Pressure Regulator can then be used to “dial in” the air flow precisely to meet specific needs.  If a job calls for higher force & flow, additional 0.002″ shims can be installed.  Shim Sets come with the Super Air Wipe Kits, or individual shims can be ordered separately.

*Performance: Before the Super Air Wipe, a ring of nozzles was commonly used.  In fact, they still are, but we’re trying to fix that, at every opportunity we come across.  Problem with those is, it’s hard to get an even air flow all around, which leads to inconsistent blow off.  They can also be loud & inefficient, as we’ve found in numerous Efficiency Lab tests and Case Studies, like this one…

These wasteful and loud modular plastic tube blow offs…
…were replaced with EXAIR Super Air Wipes. 24 such replacements netted the customer an annual compressed air cost savings of over $13,000.00.

…and this one…

Implementing a Super Air Wipe salvaged a $30,000 job for this customer. Click on the picture to read all about it in our Case Study Library (registration required.)

Do you have a challenging blow off application that you need help with?  Call us to find out how an EXAIR Super Air Wipe (or another one of our Intelligent Compressed Air Products) can be a simple, quick & easy solution.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

w

Connecting to %s