Enjoy this Summer by Avoiding Heat Related Electrical Problems with Cabinet Cooler® Systems

For many of us, summer contains some of the most enjoyable months coming up in North America. Summer typically brings more time spent outside, basking in the sunshine, lemonade, iced tea, grilling, gardening, fishing, hiking etc.

These enjoyable hot summer months coming upon us can also bring some elevated temperatures within electric control panels – but we have a simple and effective solution to avoid any heat related shutdowns and interference with electrical systems.  EXAIR can eliminate these with our Cabinet Cooler Systems, you just get on with the grilling and basking in the sun.

With freon based coolers, higher ambient conditions make them less effective; and opening the electrical panel to have a fan blow inside creates a dangerous electrical hazard.  For every 10 oC rise above the operational temperature, the life of an electrical component is cut in half.  To reduce loss in production and premature equipment failures, it is important to keep your electrical mechanisms cool.  The EXAIR Cabinet Coolers are designed to do just that.

How the EXAIR Cabinet Cooler System Works

How does the Cabinet Cooler work? 

Cabinet Coolers are powered by an EXAIR Vortex Tube which only uses compressed air to generate cold air.  They do not have any moving parts, Freon to leak, or refrigerant compressors to fail.  These simple, but effective, cooling devices can be used in the toughest of environments.  With the Vortex Tube as the “engine”, the reliability of the EXAIR Cabinet Cooler is unmatched and makes it an easy choice for cooling electrical panels.

What NEMA ratings does EXAIR offer? 

To match the same integrity as your electrical panels, EXAIR offers three different types of NEMA ratings that are UL listed and CE compliant.  NEMA 12 is dust and oil tight, and can be related to the IEC standard, IP54.  NEMA 4 is dust and oil tight as well as splash resistant for indoor and outdoor use.  The NEMA 4X is the same as the NEMA 4 except it is made of stainless steel for corrosive areas and aggressive wash-down environments.  Both the NEMA 4 and 4x corresponds to an IP66 rating.  EXAIR Cabinet Coolers are easily installed and can match your electrical panel to keep the electrical components safe inside.

What size Cabinet Cooler do I need? 

EXAIR makes it easy to get the proper cooling with the Cabinet Cooler Sizing Guide.  This guide goes over the important information to determine the external and internal heat loads.  It also indicates the proper NEMA type and electrical requirements for easy installation. The cooling power ranges from 275 BTU/hr to 5,600 BTU/hr, and with the filled-out form, we can make sure that the correct model is used.

Thermostat- Controlled System

What types of systems are offered? 

EXAIR offers a continuous operating system and a thermostat-controlled system.  The continuous operating system includes the selected Cabinet Cooler, a filter, and a cold air distribution kit.  The system will continuously cool until it is manually or automatically turned off.

The thermostat-controlled system is the most efficient way to operate a Cabinet Cooler.  This system comes with the selected Cabinet Cooler, filter, cold air distribution kit, a thermostat and an electrical solenoid valve.  The system is designed to operate only when cooling is needed.  The thermostat controls a solenoid valve, and it is preset at 95°F (35°C).  The thermostat can be easily adjusted to match other desired temperatures.  The solenoid valves come in three different voltages, 120Vac, 240Vac, and 24Vdc (which ever voltage is easily accessible).  With the thermostat-controlled system, you do not have worry about the system operating during off-peak conditions or cooler seasons.

EXAIR NEMA 4X 316SS Cabinet Cooler System with Electronic Temperature Control installed on control panel in a pharmaceutical plant.

What other options does EXAIR offer with the Cabinet Cooler Systems? 

For better temperature control, EXAIR can replace the standard thermostat and solenoid valve with the ETC, or Electronic Temperature Control.  It is a digital temperature controller with a LED screen for precision monitoring and adjusting.  The controller has easy-to-use buttons to raise or lower the desired internal cabinet temperature.  Once set, the ETC will hold the temperature to +/- 1 oF (+/- 0.5 oC).  The LED displays the internal temperature for continuous monitoring.  The ETC comes complete with the controller and a solenoid valve in two different voltages, 120Vac and 240Vac.  The ETC is a great option for real-time accurate measurements for your panel cooling.

Another option that EXAIR offers is the Side Mount Kit.  They are used to mount the Cabinet Coolers on the side of the electrical panel.  They are manufactured to match the NEMA rating of the Cabinet Cooler.  If you have limited space, don’t worry.  The Side Mount Kits gives you more areas to mount the Cabinet Cooler to your electrical panel.

What about harsh environments? 

  • With elevated ambient temperatures like near ovens, the high temperature version would be your option. The HT Cabinet Coolers work in temperatures from 125 oF to 200 oF (52 oC to 93 oC respectively).  With refrigerant coolers, the elevated temperatures make it very difficult to cool effectively.  But with the EXAIR HT Cabinet Coolers, the high temperature will not affect the ability to blow cool air.
  • If the environment is extremely dirty with lint, fibers, debris, etc., EXAIR offers an NHP, or Non-Hazardous Purge, version. The solenoid valve is designed to allow 1 SCFM of compressed air into the panel to keep a slight positive pressure. With the NHP Cabinet Coolers, the ingress of any fine particles into your electrical panels are eliminated.
  • For food and beverage, pharmaceutical, and corrosive type of applications, EXAIR can offer NEMA 4X Cabinet Coolers made from 316SS material. With the high corrosion resistance, the 316SS Cabinet Coolers will continue to operate without degrading in tough environments.
  • In Class I, Class II, and Class III hazardous areas, EXAIR has the HazLoc Cabinet Coolers. They are UL classified and can work with X-type and Z-type purge systems for the thermostat-controlled system.  The solenoid valves are also designed to be located in these areas with the same three different voltages.  The Hazloc Cabinet Coolers can be sold as a continuous operating system as well.

    Model 7929 EXAIR AC Sensor – FREE to end user customers when purchasing ANY EXAIR Cabinet Cooler System

Electrical shutdowns are expensive and annoying.  If you have interruptions from high internal temperatures, EXAIR Cabinet Coolers are a great solution.  They can be installed quickly and easily.  With no moving parts or costly preventative maintenance needed, they can operate for decades in keeping your electronics cool.  For our U.S. and Canadian customers, we are offering a promotion.  You will receive an AC Sensor, a $58.00 value, for free as a promotional item from now until the end of August 2020 with a qualified purchase.  How can you not give them a try?  If you have any questions about Cabinet Coolers or the Sizing Guide, you can contact an Application Engineer at EXAIR.  We will be happy to help.

John Ball
Application Engineer
Email: johnball@exair.com
Twitter: @EXAIR_jb

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s