Process Improvement, ROI and Safety from One Air Nozzle

Process improvement projects can be detailed, complex, expensive, and take a long time to prove their worth.  Today, I want to tell you about one that WAS NOT ANYTHING like that.

A metal stamping company used compressed air to blow their products from their dies.  They did what many do – they ran some copper tubing, and aimed it at the platen so it would properly eject the parts as they were stamped.  They KNEW it was loud, and they suspected it was inefficient as well.

After discussing the setup and seeing a picture of it (the one on the left, below,) I recommended installing a few engineered Super Air Nozzles to lower the noise levels considerably.  Boy, was I wrong.  About “a few” nozzles, that is…turns out, they only needed one Model 1122-9212 2″ Flat Super Air Nozzle with 12″ Stay Set Hose.  The copper tubes come from a manifold that already had 1/4 NPT ports – installation took a matter of minutes.  Nothing detailed, complex, or expensive about it:

This loud & inefficient copper tubing blowoff was just a compression fitting (and a Model 1122 2″ Flat Super Air Nozzle) away from being quiet and efficient.

It didn’t take much longer than that to prove its worth either: as soon as they noticed how much the noise level went down on THIS press, they ordered them for the other eighteen presses in their facility as well.

The 1/4″ copper tubes blew continuously from a pressure regulator set @60psig…the three of them theoretically consumed a total of ~80 SCFM.  The Model 1122, at 60psig supply, consumes only 17.2 SCFM.  Simple return on investment was as follows:

  • 80 SCFM was costing them $48.00 a week
    • 80 SCFM X 60 min/hr X 8 hr/day X 5 days/week X $0.25/1,000 CFM = $48.00
  • 17.2 SCFM, using the same formula, only costs $10.32 a week (I’ll let you do the math; it’s good practice.)
  • They saved $37.68 a week.  The Model 1122-9212 costs $116.00 (2020 pricing) – that means that each of them paid for themselves in just a hair over three weeks.
  • $37.68 x 50 work weeks per year = $1884.00 saved annually per nozzle
  • $1884 x 18 (the number of presses) = $33,912 saved annually 

Considering they also didn’t have to listen to those very loud open ended copper tube blowoffs, I think you’ll have to agree it made for a very good investment.  They did. The new nozzle runs at 77 decibels, a comfortable level and well below the OSHA standard [29 CFR – 1910.95(a)] for allowable noise exposure.

If you’d like to find out how EXAIR Intelligent Compressed Air Products can save you money on compressed air – and save everyone’s hearing – give me a call.

Russ Bowman
Application Engineer
EXAIR Corporation
Visit us on the Web
Follow me on Twitter
Like us on Facebook

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s