EXAIR manufactures a variety of Air Nozzles and Jets . Back Blow Air Nozzles can help reduce cost, clean hard to get to areas in small diameters, pipes, tubes, channels and holes. These nozzles are designed to remove debris from pipes, blind holes, and other areas where it is difficult be effective. Sometimes it is a bad idea to blow debris all the way through a pipe because there may be personnel on the other end or it is simply too long or it may be sealed on an end. 

The Back Blow Air Nozzles are all made from 316 Stainless Steel with three sizes as outlined below:

Model 1004SS: This is a M4 x 0.5 and delivers the smallest, most effective airflow for cleaning out small diameter tubes, pipes, channels or holes for diameters between 1/4″ up to 1″. Extension pipes available from 6″ up to 36″ in length.

Model 1006SS: The 1/4 NPT Back Blow Nozzle recommended for a wide range of diameters from 7/8″ up too 4″. Extension pipes available from 12″ up to 72″ in length.

Model 1008SS: 1 NPT female and the largest Back Blow Nozzle in stock for diameters from 2″ up to 16″ with pip extensions available from 12″ up to 72″ long.

These nozzles can also be assembled to our VariBlast, Soft Grip, Heavy Duty and Super Blast Safety Air Guns. EXAIR safety air gun options include chip shields and pipe extensions up to 72″ long. EXAIR has the products and accessories you need to make any job more efficient saving you time and money. Give us call at 800.903.9247 and ask for any of our qualified Application Engineers to help you. Most items are stock and can be shipped the same day if we receive and enter your order by 3:00PM EDT.

Eric Kuhnash
Application Engineer
E-mail: EricKuhnash@exair.com
Twitter: Twitter: @EXAIR_EK