These Nozzles Clean Blind Holes, Pipe Inside Diameters, Tube, Channels and More

EXAIR manufactures a variety of Air Nozzles and Jets . Back Blow Air Nozzles can help reduce cost, clean hard to get to areas in small diameters, pipes, tubes, channels and holes. These nozzles are designed to remove debris from pipes, blind holes, and other areas where it is difficult be effective. Sometimes it is a bad idea to blow debris all the way through a pipe because there may be personnel on the other end or it is simply too long or it may be sealed on an end. 

The Model 1006SS cleans metal shavings from inside a pipe.

The Back Blow Air Nozzles are all made from 316 Stainless Steel with three sizes as outlined below:

Model 1004SS: This is a M4 x 0.5 and delivers the smallest, most effective airflow for cleaning out small diameter tubes, pipes, channels or holes for diameters between 1/4″ up to 1″. Extension pipes available from 6″ up to 36″ in length.

Model 1006SS: The 1/4 NPT Back Blow Nozzle recommended for a wide range of diameters from 7/8″ up too 4″. Extension pipes available from 12″ up to 72″ in length.

Model 1008SS: 1 NPT female and the largest Back Blow Nozzle in stock for diameters from 2″ up to 16″ with pip extensions available from 12″ up to 72″ long.

Model 1306SS-6-CS Heavy Duty Safety Air Gun with 6″ extension and chip shield

These nozzles can also be assembled to our VariBlast, Soft Grip, Heavy Duty and Super Blast Safety Air Guns. EXAIR safety air gun options include chip shields and pipe extensions up to 72″ long. EXAIR has the products and accessories you need to make any job more efficient saving you time and money. Give us call at 800.903.9247 and ask for any of our qualified Application Engineers to help you. Most items are stock and can be shipped the same day if we receive and enter your order by 3:00PM EDT.

Eric Kuhnash
Application Engineer
E-mail: EricKuhnash@exair.com
Twitter: Twitter: @EXAIR_EK

1004SS Back Blow Air Nozzle Clean Inside Small Diameters

Model: 1004SS

A metal fabricator made stainless steel tubes with a ½” (13mm) inner diameter.  Their process started by cutting the tubes into 8” (203mm) lengths.  The tubes would go through a wash system, then to a honing machine.   Once the inner diameter was honed to the specific diameter and concentricity, the tubes would be washed again for packaging.  The honing machine used oil to accurately grind the inner diameter.  Since oil and water does not mix, they had to dry the I.D. before honing.  They contacted EXAIR to see if we could find a solution.

Back Blow Air Nozzle Family

For cleaning the I.D. of parts, EXAIR manufactures three different sizes of Back Blow Air Nozzles that are designed to clean inside tubing, pipes, hoses, and channels.  They can range from internal diameters from ¼” (6.3mm) up to 16” (406mm).  The 360o rear airflow pattern can “wipe” the entire internal surface without contacting the surface to remove water, coolant, chips, and debris.  In reviewing the inner diameter above, I was able to recommend a model 1004SS Back Blow Air Nozzle.  This 316SS robust designed nozzle can fit inside and clean tubes with internal dimensions ranging from ¼” (6.3mm) to 1” (25mm); perfect for the ½” (13mm) diameter tube.

Model: 1604SS-12-CS

The customer indicated to me that there was a rush to start this project.  EXAIR stocks thousands of cataloged items for same day shipping.  He asked if EXAIR had any other components to help them to expedite their drying process.  Well, of course we do!  Since the tube was 8” (203mm) long, EXAIR has extension tubes that are used with our VariBlast Compact Back Blow Safety Air Gun.  We have them ranging from 6” (152mm) to 72” (1829mm) in incremental lengths.  For this customer, I recommended the 12” (305mm) extension to reach through the tube.  And, since it was a manual operation, I also recommended the model 9040 Foot Valve.

Model 9040 Foot Valve

Their operator could place the tube over the model 1004SS Back Blow Nozzle and with the Foot Valve, turn on the compressed air to dry the tubes.  With the powerful air stream, the entire internal surface was dry for the honing process to follow.

If you need to clean the inside of tubes, hoses, pipes, etc., EXAIR has the perfect nozzles for you, the Back Blow Air Nozzles.  EXAIR can attach these nozzles to our VariBlast Compact, Soft Grip and Heavy Duty Safety Air Guns for easy-to-use operations.  For this customer above, they were able to use components to get the operation running the next day.  If you need more information, you can share your application with an Application Engineer at EXAIR.  We will be happy to help.

John Ball
Application Engineer

Email: johnball@exair.com
Twitter: @EXAIR_jb

Product Overview: Back Blow Safety Air Guns

BackBlowNozzle

EXAIR’s highly engineered and efficient Back Blow Nozzle’s provide a powerful 360° airflow through an array of holes to remove coolant, chips or debris.  Back Blow Nozzle’s are the perfect solution for cleaning out the inside of any pipe, tube, hose or channels.

They are available in three different sizes:

M4 X .5 BB Nozzle

.25 NPT BB

1 NPT BB

The Back Blow Nozzle’s are also offered on the VariBlast, Soft GripHeavy Duty, and Super Blast Safety Air Guns.  They can be configured with different length extensions (up to 72″) to make nearly any cleaning job within reach!   We recommend the optional Chip Shield since the air stream is carrying the debris back towards the operator.

1604SS-6-CS-lftangle
Variblast Safety Air Gun 1604SS-6-CS, Includes 1004SS Back Blow Nozzle With 6″ Extension and Chip Shield. The 1604SS Is Offered In 6″, 12″, 24″ and 36″ Lengths.

1204SS-6-CS
Soft Grip Safety Air Gun 1204SS-6-CS, Includes 1004SS Back Blow Nozzle With 6″ Extension and Chip Shield.  The 1204SS Is Offered In 6″, 12″, 24″ and 36″ Lengths.

1206SS-6-CS559
Soft Grip Safety Air Gun 1206SS-6-CS, Includes 1006SS Back Blow Nozzle With 6″ Extension and Chip Shield.  The 1206SS Is Offered In 12″, 18″, 24″, 36″, 48″, 60″ & 72″ Lengths.

1306SS-6-CS
Heavy Duty Safety Air Gun 1306SS-6-CS, Includes 1006SS Back Blow Nozzle With 6″ Extension and Chip Shield.  The 1306SS Is Offered In 12″, 18″, 24″, 36″, 48″, 60″ & 72″ Lengths.

1219ss800
Super Blast Safety Air Gun 1219SS, Includes 1008SS Back Blow Nozzle With 1′ Extension.  The 1219SS Is Offered In 1′, 3′ & 6′ Lengths.

Take it from me EXAIR’s Safety Air Guns fitted with a  Back Blow Nozzles are a must have for any operation that needs to remove debris from pipes, tubes or hose!

If you would like to discuss Safety Air Guns with Back Blow Nozzles or any of our quiet and efficient compressed air devices, I would enjoy hearing from you…give me a call.

Steve Harrison
Application Engineer
Send me an email
Find us on the Web 
Follow me on Twitter
Like us on Facebook