When considering your blowoff solution, the angle at which you direct the airflow is very important. This is often found through testing and trying. Once you have found the sweet spot for your engineered, compressed air nozzle, you want to be sure that it won’t move. This is where our Stay Set Hoses and Mag Bases come in.
Our Stay Set Hoses have a memory function, so they won’t creep or droop until you physically move them. They are perfect for directing the air flow in a particular direction, or at a specific target. Just be sure you are adjusting them properly to keep them operating for years to come. The Stay Set Hoses come in lengths from 6″ (15cm) to 36″ (91cm), and they have threaded connections with either 1/4″ NPT male on both ends or with a 1/8″ NPT female X 1/4″ NPT male thread. The hoses are made from reinforced synthetic rubber and have a maximum pressure rating of 250 PSIG, and can withstand temperatures of up to 158°F (70°C).
Our Mag Bases can quickly be mounted to any solid steel surface. With 100lb (45.5kg) of pulling force, they will keep your blowoff device firmly in place, whether mounted horizontally, or vertically. They can also be easily moved when a different position is needed. With three different options; a 1-outlet, 2-outlet and a 1-outlet swivel. The 1/4 turn shut off valve allows for easy control to ensure you’re not wasting compressed air when it’s not needed.
If you have a blowoff application that you would like to discuss, don’t hesitate to give us a call. We’d love to discuss the best solution for you!
Al Wooffitt
Application Engineer
Send me an Email
Find us on the Web
Like us on Facebook
Twitter: @EXAIR_AW