EXAIR’s Cabinet Cooler System is Durable and Reliable

Any realtor will tell you that the three most important factors in selecting a property are location, location, and location. This simply means that houses with similar features – number of bedrooms, yard size, structure, garage (or not,) basement or not,) etc. – can be found in a lot of very different neighborhoods. Whether you want to live somewhere that’s convenient to the highway, close to (or not so close to) work, near your favorite activities, etc., odds are you can find a house that meets your material needs & wants within those geographical confines. Hence, location is your #1 consideration. And your #2 and your #3 as well…my lovely bride is a real estate professional, so I have this on good authority. And, so you know, #4 is price, and #5 is condition.

Electrical and electronics controls professionals will tell you that three of the most important things to protect their equipment from are heat, moisture, and dust. If you’re looking for a durable, reliable, and low cost method for that, we’ve got the solution: the EXAIR Cabinet Cooler System. Selection of the right system comes down to determining your heat load, and…the reason for today’s blog…the LOCATION in which it will be installed.

Let’s say it’s a control panel for one of the machines on a factory production line…indoors & dry.  Our NEMA 12 Cabinet Cooler Systems provide protection against dust and oil from entering the enclosure.

NEMA 12 Cabinet Cooler Systems are oil tight, dust tight, and rated for indoor duty. They can also be installed to the wall of an enclosure (instead of the top) with a Side Mount Kit.

If the enclosure is outdoors, or indoors but subject to water spray (like in a wash-down area,) our NEMA 4 Cabinet Cooler Systems are oil tight, dust tight, AND splash resistant.  They ensure the inside of the enclosure stays dry through the use of a low pressure relief valve that seals when the cooler is not operating, maintaining NEMA 4 integrity at all times.

EXAIR NEMA Cabinet Cooler Systems provide additional protection to keep the enclosure dry inside.

Our NEMA 4X Cabinet Cooler Systems are made of stainless steel, and are commonly specified for food service area installations, and in corrosive environments.  They’re also oil tight, dust tight, and splash resistant.  These are also available in Type 316 Stainless Steel construction, for especially harsh conditions, or when this is otherwise specified due to the nature of the installation, such as critical food grade or pharmaceutical areas.

EXAIR NEMA 4X Cabinet Cooler Systems are made of corrosion resistant stainless steel for corrosive environments, and are also available with Side Mount Kits.

Regardless of the NEMA rating called for by the location, all EXAIR Cabinet Cooler Systems are available with a Non-Hazardous Purge option, which provides a slight positive pressure through a low (1 SCFM) air flow when internal temperature is below the thermostat setpoint and the solenoid valve is closed.  This provides constant and reliable protection, even if the enclosure is not perfectly sealed, even in especially dirty or dusty environments.

All EXAIR Cabinet Cooler Systems are available with Non Hazardous Purge for constant, reliable protection from environmental contaminants.

High Temperature Cabinet Cooler Systems are also available when ambient temperatures can exceed 125F.  These are popular in foundries, glass production facilities, and even non-air conditioned spaces in particularly warm climates.

High Temperature Cabinet Cooler Systems provide reliable heat protection in areas where ambient temperatures reach 125-200F (52-93C)

If you’ve got sensitive, mission-critical electrical or electronic enclosures that need reliable heat protection, EXAIR has the solution you’re looking for.  If you know the required cooling capacity for your enclosure, you can select the right system directly from our website.  If you’d like help in calculating your heat load, you can use our Cabinet Cooler System Sizing Guide…just fill in the blanks and click “submit” – your request will be forwarded to an Application Engineer for immediate attention.  Or, if you’d rather, just give me a call.  We calculate heat loads over the phone all the time; it only takes a minute.

High Temperature Cabinet Cooler, Your Oasis For Hot Summer Conditions

Think about where you work. During the hot summer season, does it feel like this?

Think about all the electrical and electronic control cabinets used around your shop. Are any of them located near to an oven, furnace, or other source of heat? Imagine how hot it gets inside those cabinets with the added load of electronics giving off heat inside. With high temperature applications like these, it is a wonder how many electronics are able to survive the double-threat of summer and of hot processes.

EXAIR actually has a solution for these kinds of applications to keep cabinets in these kinds of applications cool. It is called High Temperature Cabinet Cooler. The High Temperature Cabinet Cooler System is set up to deliver the rated cooling power even under the most demanding of hot applications up to 200° F (93°C). In fact, many of our customers come to us from the Middle East countries such as Saudi Arabia, United Arab Emirates, and Oman because our High Temperature Cabinet Cooler has earned its reputation as a robust performing Cabinet Cooling System even in demanding, desert-type conditions. And since there are no moving parts to burn up or wear out, our High Temperature Cabinet Cooler will last for years with little or no maintenance.

If you are in search of your oasis in the desert with keeping your cabinets cool,

Give some serious thought to using High Temperature Cabinet Cooler. You will not be disappointed. Fill out your Cabinet Cooler sizing guide and submit to us today.

Neal Raker, Application Engineer

nealraker@exair.com