Compressed Air Use in the Construction Industry

EXAIR uses many different methods to connect with our customers.  We have our website, social media, blogs, publications etc. We like to share solutions for some of the most common pneumatic problems in the industry.  EXAIR generated a large collection of application information where EXAIR products have solved problems and improved processes.  We organized them by Application and by Industry.  In this blog, I will show you how to use the Application database; specifically, for the Construction Industry.

Compressed Air Systems are considered to be a fourth utility within industries because they use a large amount of energy.  Whether it is an air compressor using fuel for portable units or electricity, it is important to use the compressed air as efficiently as possible.  This would apply to the construction industry.  From blowing off sheets of lumber to cleaning sites with an EXAIR Industrial Vacuum to cooling hot melt on window frames, EXAIR has a library of different processes in which we already accomplished these improvements.  We like to use the expression, “Why re-invent the wheel” at EXAIR.  If you are in the construction industry, it would benefit you to take a peek at the implementations where we already improved, made safe, and saved money.

Here is how you can find this library.  First, you will have to sign into EXAIR.  Click here: Log In.  Once you fill in the proper information, you can then retrieve a great amount of resources about EXAIR products that we manufacture.   The Application Database is under the Knowledge Base tab.  (Reference photo below).

At the Application Search Library, we have over one thousand applications that we reference.  In the left selection pane, we organized then in alphabetical order under two categories, Applications and Industry.   (Reference photo below).

Scroll down in the selection pane until you come to the sub-category: Industry.  Under this Sub-category, you will find three selections that are related to this blog: Construction; Construction and Mining Equipment; and Construction, Lumber.  You will find many applications that EXAIR has already improved and documented.

Why is this important?  If you are a plant manager or owner, the value of the Application Database can improve your current processes with pre-qualified results.  Within the construction industry, simple solutions can be found to address those “nagging” issues that you encounter every day.  For crisis situations and shutdowns, EXAIR categorized these applications in a way to reference quickly and easily.  And since EXAIR has a high volume of stocked items, we can get the product to you very fast; minimizing downtime.

In today’s market, companies are always looking for ways to cut cost, increase productivity, and improve safety.  EXAIR can offer engineered products to do exactly that.  With the “been there and done that” solutions already described in the Application Database; you can have confidence in finding a way in solving pneumatic issues.  If you do not sign up at www.EXAIR.com and take advantage of these offerings, you will be missing out on a great tool in optimizing your compressed air system.

John Ball
Application Engineer
Email: johnball@exair.com
Twitter: @EXAIR_jb

Super Blast Safety Air Gun Saves Air vs. an Inefficient Homemade Lance

I was recently contacted by a Chicken Farm in Canada about a blow off application for cleaning the dust and debris off the walls and ceilings in their barns. They currently use a 185 SCFM portable, engine driven compressor and a lance made from 3/4″ open copper tube. The barns are rather large, approximately 10′ high by 500′ long, and they place the compressor in the middle of the barn and have a 250′ length of hose going to the homemade blowoff. This setup worked fine for a minute or so but then the airflow would start to weaken at the point-of-use and the compressor would run continuously as it wasn’t able to maintain pressure to keep up with the demand of the copper pipe.

Picture of existing homemade air lance

After discussing the details of the application, I recommend the customer use our Model # 1214-6 Super Blast Safety Air Gun with 6′ aluminum extension. This would reduce the air demand to 91 SCFM, more suitable for use with the existing 185 SCFM compressor.

 

Super Blast Safety Air Gun Model # 1214

The design of the Super Blast Safety Air Gun features a spring loaded manual valve, providing automatic shutoff and a comfortable foam grip. The 6′ extension provides the extra reach they need to effectively treat the walls and ceilings in the barn.

The Super Blast Safety Air Guns are ideal for wide coverage, long distance applications. They use our Large Super Air Nozzles and Super Air Nozzle Clusters, providing forces levels from 3.2 lbs. up to 23 lbs, depending on which nozzle is fitted on the assembly. Air inlets range from 3/8 FNPT up to 1-1/4 FNPT and aluminum extensions are available in 36″ or 72″ lengths.

If you have any questions or need further assistance, please contact an application engineer.

Justin Nicholl
Application Engineer
justinnicholl@exair.com
@EXAIR_JN