Blowing off bottles is such a popular application for the EXAIR Super Air Knife, it’s been featured on the cover of our Catalog…several times…and is the “banner” pictures on the Super Air Knives page on our website:

I had the pleasure of helping a caller from a bottling plant recently with just such an application.  Thing is, they run a couple of different size bottles, and it’s not a very big facility…they didn’t want to, or have room to, install different lengths of Air Knives, and also didn’t want to waste air flow when they were running the shorter bottles.

9″ Air Knives were required for the taller bottles, but their shorter bottles were a little under 6″ tall.  They had considered buying both 6″ and 9″ Air Knives, but called me to see if there was a less expensive, and possibly, easier way.  (There is!)

EXAIR makes, and stocks, every product in our 208 page catalog right here in this building in Cincinnati, Ohio.  We also make custom parts when the need arises…and custom Air Knife shims were the solution to this customer’s application.

By installing two Model 110009 9″ Aluminum Super Air Knives, one on either side of the conveyor (just like the photo above,) they’re able to blow off the taller bottles.  When they run the shorter bottles, they change out the shims for ones that limit the flow to a 6″ curtain.

So…for a little under $50.00 (2017 cost for those custom shims,) they’re going to save almost $550.00 per year in compressed air costs – AND make sure that their compressed air system is optimized & available for other loads throughout the plant.

EXAIR offers the Super Air Knife in lengths from 3″ to 108″, with a 0.002″ shim installed.  They’re ideal for most industrial and commercial blow off applications, right out of the package.  If your application calls for something a little “outside the box,” you may only be a shim away from success.  If you have such an application, give me a call.

Russ Bowman
Application Engineer
Find us on the Web
Follow me on Twitter
Like us on Facebook