There are a few ways to get the liquid out of a drum:
- You can use a pump. Some pumps are even made to mount straight onto the lid of the drum.
- You can siphon the liquid out, if you can get the drum higher than where you want to put the liquid. And if you have the time.
- You can turn the drum over. I used to do field service in chemical plants…some of them had drum handlers on fork trucks that could pick up and tilt the drum to pour the liquid out. Some of them pushed the drum over and simply let the liquid spill into a pit or below-grade sump.
But pumps break down. Siphoning is finicky and slow. I’m loath to knock the skills of the fork truck operator that can pour out a drum like a sommelier pours a fine wine. And I’ll never forget the first time I saw an operator half-roll/half-dance a drum to the edge of that pit and let the liquid dump as he dropped it precisely where he wanted it…however, even in the context of the inner recesses of a chemical plant, it was simple, but inelegant.
EXAIR has an engineered solution that preserves the simplicity, though: the Reversible Drum Vac. Thread the standpipe into the bung connection and the RDV itself into the vent, and that drum is now a two-way pumping system, able to be emptied via a 10 foot long Vacuum Hose in as little as a minute and a half. Turn the knob on the RDV to switch modes, and you can fill that same drum just as fast.
The EXAIR Reversible Drum Vac Systems come with a variety of configurations and options:
- Made to fit an existing 30, 55, or 110 closed top steel drum in good condition.
- Mini Reversible Drum Vac System comes with a 5 gallon drum.
- Deluxe Systems add a Drum Dolly and a set of tools.
- Premium Systems add a drum (30, 55, or 110 gallon,) an upgrade to Heavy Duty Aluminum Tools, and a 20ft compressed air supply hose with shutoff valve and pressure gauge.
- High Lift Reversible Drum Vacs generate a suction head of 180″H2O for maximum lift. They’re also specified for higher viscosity liquids.
Below is a great video that showcases just how easy it is to from installing the Reversible Drum Vac to using the Reversible Drum Vac and just how fast the RDV operates.
If you’re looking for a fluid handling solution for liquids in drums, give me a call and we’ll talk about which Reversible Drum Vac System is right for you.
Visit us on the Web
Follow me on Twitter
Like us on Facebook
2 thoughts on “EXAIR Reversible Drum Vac Fills A 55 Gallon Drum in 90 Seconds Flat, And Empties It Just As Fast”
How heavy of a liquid will this handle? I’m thinking along the lines of paint-oil or water based, hydraulic oil, and/or engine oil? I did watch the video.
Our High Lift products can handle liquids up to 1400cP, the thicker the liquid the longer it takes to pump. For our standard Chip Trapper, 55 gallons of a a 15W40 motor oil will take 7 minutes to fill the drum. Our High Lift Chip Trapper can do the same in less than 4 minutes and 30 seconds.
Thank you from EXAIR