Baseball season is in full swing, temperatures are climbing, and there’s pollen in the air. It must be spring!! The coming of spring means it’s time to start opening up the windows and tidying up around the house. It also means an increase in rain showers. To those of you out there that have experienced the joy of walking down into the basement only to find a nice pool of water I feel your pain. A crack in our foundation allowed a significant amount of water to seep inside, of course all over the brand-new carpet!!
I went out to the garage and grabbed the ol’ trusty shop vac and began vacuuming up as much residual water as I could. Shop vacs are a great tool for cleaning up a variety of messes in your home. However, the very same shop vac is not suitable for use in an industrial environment. EXAIR manufactures a variety of compressed air operated industrial vacuum systems. For the purpose of this blog, I’m going to highlight the systems suitable for use with wet materials.
Electric vacuums have impellers that can clog or break, the motor will eventually burn out, not to mention the risks associated with using electrical products near liquid. With no electricity and no moving parts to wear out, EXAIR’s Industrial Housekeeping products are much better suited to withstand a harsh industrial environment.
The Reversible Drum Vac attaches quickly to any closed head 30, 55, or 110 gallon drum. It’s capable of filling a 55 gallon drum in as little as 90 seconds! With a simple turn of the knob, it’s able to quickly pump the liquid back out of the drum. Coolant sumps can easily be refilled, floor spills contained, or contaminated liquids can be transferred to filtration tanks in minutes.
The High Lift Reversible Drum Vac operates just the same as the standard, but provides a higher-powered vacuum for use with thicker liquids or for applications that need to lift the liquid from below grade work areas up to 15’ deep. Both the standard and High Lift Reversible Drum Vacs have an automatic safety shutoff valve to prevent the drum from overfilling.
The Reversible Drum Vac is also the heart behind our award-winning coolant filtration system: the Chip Trapper. The Chip Trapper is a fast and simple way to clean chips, swarf, and shavings suspended in the coolant sump of your CNC machines. The liquid and suspended solids are vacuumed up into the drum. A filter bag inside traps the debris, chips, and shavings and allows you to pump clean liquid back out of the drum. The filter bag can be removed and cleaned for repeated use. Each system will come with (2) bags to get you started. Not only does this extend the life of your coolant, but can also eliminate the potential for chips and shavings to get clogged in the coolant system and reducing coolant flow. It, too, is available as a High Lift Chip Trapper System for thicker liquids or sumps that are below ground.
If you’re looking for a vacuum system that’s Built to Last, EXAIR has the right tool for you. All of our vacuum systems have no moving parts to wear out and are maintenance-free when supplied with clean and dry compressed air. With all systems available in stock and same day shipment for stock items, you can have one just in time for your annual spring cleaning!