EasySwitch Wet-Dry Vac with HEPA Filter

When I bought my first house (I was a happy condo dweller prior to the birth of my second son), I got a gift card for a home improvement store from some of the folks I worked with. Since my mother-in-law had already bought me a lawn mower, I used that gift card to purchase another staple of the Suburban Dad’s Garage: a heavy duty wet-dry shop vac. It quickly proved its usefulness as a dry vac in cleaning up after a couple of wood working and plumbing (mis)adventures, and as a wet vac following a sump pump failure & subsequent replacement. That last part was when I learned a valuable lesson about the filter cartridge that catches dirt, debris, sawdust, PVC shavings, copper shavings & solder slag: it gets ruined, and makes a HUGE mess inside the drum, if you don’t take it out before pumping the residual water from your basement sump.

I’d like to say that never happened again, but I had the old “there’s got to be a better design” thought every time I carefully positioned a large trash bag underneath so I could finagle a waterlogged & debris-laden filter out of my shop vac canister without making an even bigger mess on the floor. Now, I don’t believe this had anything to do with our R&D engineers’ development of the EasySwitch Wet-Dry Vac, but it IS an amazing coincidence…

Not that it’s particularly difficult to change the filter in my shop vac, but this is indeed an “Easy Switch”.

If you’re looking for a powerful, reliable, and easy to use industrial vacuum, here it is. Made to fit a standard 55 gallon open top drum, the EasySwitch Wet-Dry Vac Systems come in a variety of configurations to meet your specific Industrial Housekeeping needs:

  • If you have a drum, the EasySwitch Wet-Dry Vac kit comes with everything you need for basic operation:
    • The EasySwitch Wet-Dry unit itself
    • Drum Lid with filter hatch
    • Standard or HEPA filter & pre-filter
    • 20ft compressed air hose, pressure gauge, and shutoff valve
    • 10ft vacuum hose, crevice tool, straight wand, skimmer tool, and dust brush
  • For portability and convenience, the Deluxe system adds:
    • Drum dolly
    • Upgrade to anti-static vacuum hose and Heavy Duty Aluminum Tools
    • Spill Recovery Kit (for floor cleanup of liquids)
    • Magnetic Tool Holder
  • And if you need a drum, the Premium system adds that as well.

The standard filter is suitable for general purpose dry vacuuming, but for critical dust removal, our HEPA filter conforms to IEST-RP-CC-007 specifications for minimum 99.97% filtration at the 0.3 micron level. If your cleanup involves toxic materials, respiratory irritants…anything that people shouldn’t be breathing…you’ll definitely want the HEPA filter.

For critical dust containment, the award winning HEPA EasySwitch Wet-Dry Vac System is your durable, reliable, compressed air operated solution!

And, of course, you can still remove the filter (don’t forget that part; that’s how this blog started) for high performance liquid vacuuming as well. If you’d like to find out more about the HEPA EasySwitch Wet-Dry Vac – or any of our other Industrial Housekeeping Products – give me a call.

Russ Bowman, CCASS

Application Engineer
EXAIR Corporation
Visit us on the Web
Follow me on Twitter
Like us on Facebook

Advantages Of Compressed Air Operated Industrial Vacuums

Last week, I wrote about the benefits and advantages of the EXAIR Chip Trapper System. It’s just one workhorse in our stable of durable and reliable compressed air operated Industrial Housekeeping solutions.  All of our systems in this product line are compressed air operated, which means they offer several benefits that you don’t get with an electric powered vacuum:

  • Our air operated vacuums have no moving parts.  That means nothing to wear out & replace.
  • Electric motors burn out over time, and have to be replaced.  Not a problem with our products…if you supply them with clean air, they’ll run darn near indefinitely, maintenance free.
  • Using electric vacuums in wet areas can prevent a very real risk of electrocution.  This hazard does not apply to a compressed air hose, which is all it takes to run our products.
  • Long, stringy chips can get clogged in the impeller & rotating parts of a motor-driven vacuum.  Ours have no moving parts, which means nothing for detritus to get tangled up in.
Electric Vacuums are prone to clogging, wearing out, and motor failure.

Which EXAIR Industrial Housekeeping Product is right for you?  It depends on what you’ll be using it for.  Very generally speaking, here’s a brief overview of the product line:

Chip Vac Systems:

  • Pick up dry or wet chips and transfer them into a standard open top drum.
  • Available in four sizes: 5, 30, 55, or 110 gallon drums.
  • Turns your own 30, 55, or 110 gallon open top drum into a powerful vacuum system, in minutes, with a standard system.
  • Add portability and flexibility with a Deluxe System, which includes a drum dolly and a Tool Holder.
  • For a total Industrial Vacuum System, complete & ready to go right out of the box, the Premium Systems add a drum, a compressed air supply hose, an upgrade to Heavy Duty Aluminum Tools & a Static Resistant Vacuum Hose.
  • For smaller jobs or in tight quarters, the Mini Chip Vac System comes with a compact 5 gallon drum.  The Deluxe System adds a drum dolly for portability.

Heavy Duty Dry Vac Systems:

  • Function is similar to the Chip Vacs, but the vacuum itself is made of a hardened alloy, and offers higher vacuum power for dense and/or abrasive material cleanup.
  • Fits your existing 30, or 55 gallon drums for a quick & easy, basic high powered vacuum solution.
  • Deluxe Systems add Heavy Duty Tools & Tool Holder, and a Drum Dolly.
  • Premium Systems come with a 30, 55, or 110 Gallon Drum.

Heavy Duty HEPA Vac Systems:

  • All the power, durability, and convenience of the Heavy Duty Dry Vac Systems, but with a HEPA filter for contaminants such as mold, allergens, and other airborne irritants.
  • Fits your existing 30 or 55 gallon drums, or Deluxe & Premium Systems add the same accessories as the Heavy Duty Dry Vac Systems.
(Left to right) Chip Vac, Heavy Duty Dry Vac, Heavy Duty HEPA Vac

Reversible Drum Vac Systems:

  • These are our drum mounted vacuums for liquids.  They’ll fill or empty a 55 gallon drum in 90 seconds (tested with water.)
  • Fits an existing 30, 55, or 110 gallon closed top steel drum in good condition.
  • Deluxe Systems add a drum dolly, a Tool Holder and a set of plastic tools including a Spill Recovery Kit, for a multitude of cleanup needs.
  • Auto shutoff float prevents overfilling the drum.
  • Premium Systems add a 30, 55, or 110 gallon drum, Heavy Duty Aluminum Tools, and a compressed air supply hose.
  • High Lift Systems are available for higher viscosity (ups to 1400 cP) liquids, or when pumping from below grade (180″H2O suction lift.)
  • This same technology is incorporated into the Chip Trapper Systems, which (as detailed last week) trap incoming solids in a Filter Bag, allowing for instant pumping out of freshly filtered liquid.  They’re available with the High Lift capability as well.
Reversible Drum Vac, High Lift Reversible Drum Vac, Chip Trapper

Vac-u-Guns:

  • Handy and portable, the Vac-u-Gun is a lightweight handheld vacuum, blow gun, and transfer tool, all in one.
  • Collection System comes with a vacuum bag w/shoulder strap, extension wands, a crevice tool, skimmer tool, and round brush tool.
  • Transfer Systems come with the same tools, but include a 10ft hose instead of the vacuum bag.
  • All Purpose Systems come with the tools, the vacuum bag, and the 10ft hose.
  • Deep Hole Vac-u-Guns are fitted with a blow tube for stirring up fine debris from drilled holes, where it’s quickly and efficiently vacuumed away.

Regardless of your application, EXAIR has an Industrial Vacuum to fit.  Orders for qualifying systems through the end of May 2020 will include a free Vac-u-Gun.  If you’d like to discuss your Industrial Housekeeping needs, give me a call.

Russ Bowman
Application Engineer
EXAIR Corporation
Visit us on the Web
Follow me on Twitter
Like us on Facebook

A Closer Look At The EXAIR Reversible Drum Vac Systems

Amidst the multitude of products that EXAIR offers, we have a full line of Industrial Housekeeping Products, our pneumatic vacuums.  Within this product line is the Reversible Drum Vac System. This system is a product that I personally encountered fresh out of college in my first job within the metal cutting industry. I would actually carry a standpipe, 10′ hose, chip wand, and reversible drum vac in a job box to every machine tool show as well as some larger machine repair jobs I was responsible for.

EXAIR’s model 6196 – Reversible Drum Vac System

At the time, I didn’t know it was an EXAIR product as it had been around for years before me and had seen better days, had been used thoroughly and all I knew was that I could empty a sump faster than anyone else that I saw anywhere in the shows or even the large sump evacuation systems some of these shops had that almost had to be towed around with a forklift.  This was a marvel to me as I had honestly been showed one time how to use it from another team member and I was able to grasp all the knowledge needed to operate (Not because I am a genius or anything, it’s just that simple). The few things I was not aware of is what the other options for the Reversible Drum Vac Systems were. All I knew is what I had when I worked at that company and didn’t know what kind of possibilities there were to expand our capabilities, so hopefully, this will help you see all the options.

While EXAIR currently offers four different types of liquid vacuums, they are all based on the Reversible Drum Vac or the High Lift Reversible Drum Vac. The Reversible Drum Vac itself is available in four capacities of drums and several options for each. The three capacities available are 5, 30, 55 or 110 gallon.

The 5 gallon is perfect for bench-top machines or small tests that are taking less than five gallons of liquid.  The system can still pull up to 96″ of H2O and discharges at an even faster rate than it vacuums which is 30 GPM.  The system includes the container, lid, 10′ vacuum/discharge hose, aluminum chip wand, Reversible Drum Vac, standpipe, quick connect,  spill recovery kit, and several other ancillary attachments to make any liquid reclamation job easy and quick. The Deluxe Mini Reversible Drum Vac system adds on a drum dolly which makes this an easy to transport compact and efficient liquid spill/recovery system.

 

 

The 30, 55, and 110-gallon capacity systems are available in a basic, deluxe, and premium system. The Basic includes the standpipe for a given size, 10′ vacuum/discharge hose, quick connect, aluminum chip wand, and Reversible Drum Vac.  The Deluxe System adds a spill recovery kit, drum dolly, magnetic tool holder, and other ancillary plastic tools. The premium adds the appropriate drum with a tight sealing lid, latch/bolt ring, 20′ compressed air hose w/ quick disconnects,  as well as upgrades plastic tools to cast aluminum tools.

If you would like to discuss which of these systems is going to fit your needs and give you the ability to fill a drum ta 30 GPM and empty it even faster, please contact me.

Brian Farno
Application Engineer
BrianFarno@EXAIR.com
@EXAIR_BF

Video: EXAIR Drum Vacs Selection For Solid Materials

EXAIR Corporation has engineered compressed air solutions for Industrial Housekeeping…among them, a full line of drum mounted vacuums for dry/solids cleanup.

If you’d like to find out more, please give me a call.

Russ Bowman
Application Engineer
EXAIR Corporation
Visit us on the Web
Follow me on Twitter
Like us on Facebook