EXAIR’s line of 1” and 2” Flat Super Air Nozzles are rugged, efficient, and ideal for applications that require a wide forceful stream of airflow. The patented design utilizes a special shim to maintain the critical position of the component parts. The result is a laminar, high velocity blast of air with minimum air consumption and sound level.
The Flat Super Air Nozzles are available in a wide range of configurations. With both the 1” and 2” sizes you have the ability to select either Zinc Aluminum alloy or Type 316 Stainless Steel for higher temperature or corrosive applications. They’re also available installed at the end of our Safety Air Guns. The 1” Flat Super Air Nozzles are ideal for our VariBlast Compact Safety Air Gun while the 2” is suitable on either our Soft Grip Safety Air Gun or the Heavy Duty Safety Air Gun. With extensions ranging from 6”-72” and Chip Shields also available, you have the ability to tailor a blowoff gun to your exact application. Since the design of the nozzle prevents any chance for it to be dead-ended, all configurations will be compliant with OSHA directive 29 CFR 1910.242(b). This means you’re able to operate at pressures in excess of 30 PSIG without risking harm to your operators.
In addition to two different sizes and materials, there’s also a wide range of shims that can be installed. Just like the Super Air Knife, the thickness of the shim installed (in addition to the input compressed air pressure) will dictate the force and flow through the nozzle. For both the 1” and 2” Flat Super Air Nozzles, shim thicknesses are available ranging from .005”-.030”. Thicker shims will increase the force and flow, thinner shims will reduce it while also reducing the air consumption. To allow you to experiment with different flows, we make shim sets available that’ll allow you to test out a few different sizes in order to determine the best solution for your application.
New to EXAIR in 2018, the Model 1144 2” Super Air Scraper is a patent pending nozzle used to remove stuck-on debris from work or machine surfaces. It incorporates a strong corrosion resistant scraper blade to add necessary leverage to allow you to get underneath and scrape away debris. The strong airflow from the 2” Flat Super Air Nozzle then is able to get underneath and blow away the material. The scraper nozzle is great for applications involving the removal of tape from floors, gaskets, adhesive, labels and stickers, grease, paint and sealant. It’s also available on the end of our Soft Grip Safety Air Gun with durable ¾” air extensions in lengths ranging from 6”-72” and Chip Shields.
You may have seen (or used) the plastic flat nozzles that come in a variety of different colors. EXAIR’s Flat Super Air Nozzle is a safe, efficient replacement that will maintain a similar airflow pattern at a dramatically reduced operating cost. EXAIR’s flat nozzles also offer a reduced sound level compared to these styles of nozzle. Reducing sound is another directive that OSHA 29 CFR 1910.95 outlines. If you’re using an unsafe nozzle in your facility, OSHA can quickly begin assessing fines for each violation. They don’t announce their visits beforehand, so make sure you do your due diligence and assess your compressed air usage yourself!
All of these possibilities are available from stock with same day shipments. EXAIR’s wide-range of solutions allow you to customize the product to your exact specifications. Stop wasting time and money replacing cheap plastic air nozzles, get yourself a nozzle that’s Built to Last by EXAIR!