In February of 1972 OSHA released a standard to improve worker safety when operating handheld compressed air devices being used for cleaning purposes. This directive focuses around human skins permeability. That is, if you were to take an open ended pipe that had compressed air being discharged over 30 psig it can actually push through the skin and create an air embolism.
Air Embolisms are extremely painful, and in extreme cases, can be deadly. The risk associated with an air embolism can be mitigated by following the OSHA directive and reducing the downstream pressure of an air nozzle or nozzle pressure below 30 psi for all static conditions. Dead ending is when the passageway for the air becomes blocked and turns a dynamic flow of air into a static flow. This is in the event the pipe, nozzle, lance, etc. becomes blocked by a human’s body. This is a directive that all Intelligent Compressed Air® products from EXAIR focus on meeting or exceeding.
Our Air Nozzles and Jets video shows a great depiction of how this can be achieved with our engineered design of nozzles. The recessed holes and the fact that there are multiple passages for the air to exit are easy to see on the nozzle. Products like the Super Air Knife may not be so easy to see but the way the air knife cap overlaps prevents the Super Air Knife from being dead ended in the event an operator comes into contact with the discharge air.
Even though this directive was created in 1972 it continues to be at the forefront of industrial environments. I have even been to a custom artwork facility that was effected by this standard because they would use a handheld blowgun to remove dust and debris before matting and framing artwork with glass. They also removed dirt and dust from the frames before paint. This wasn’t your typical manufacturing environment yet they were still held to the same standards and were made safe by implementing engineered solutions such as our Super Air Nozzle.
If you would like to discuss how we can help increase your operator safety and ensure you meet or exceed OSHA 29 CFR 1910.242(b), please contact an Application Engineer today.
Brian Farno
Application Engineer
BrianFarno@EXAIR.com
@EXAIR_BF
1 – OSHA Instruction STD 01-13-001 – Retrieved from: https://www.osha.gov/enforcement/directives/std-01-13-001