New! In Stock! Sanitary Flange 316 Stainless Steel Line Vacs

Just released, we are now stocking four different pipe sizes of Sanitary Flange 316 Stainless Steel Line Vacs. We are offering these in the following sizes, 1-1/2″, 2″, 2-1/2″, and 3″ Sanitary Flange.   The performance is the same as our Stainless Steel Line Vacs,  but now it is even easier to install in sanitary flanged piping systems.  No need to get adapters or have specialty shops weld flanges on.

Model 161200-316 - 316 Stainless Steel Sanitary Flange Line Vac
Model 161200-316 – 316 Stainless Steel Sanitary Flange Line Vac

The new Line Vacs are available for purchase on their own or in a kit which includes the Line Vac, a mounting bracket for the Line Vac, pressure regulator and filter separator. The only parts you provide are the clamps, gaskets and compressed air supply.

With a wide range of sizes and materials of construction, we've got your solution. Call us.
With a wide range of sizes and materials of construction, we’ve got your solution. Call us.

These are the latest four additions to our already extensive line of in-line pneumatic conveyors.   If we do not offer a stock Line Vac that will fit your needs, we also offer custom Line Vacs to fit virtually any need you may have, just contact us and we will help you determine what will work!

Custom PVDF Line Vac
Custom PVDF Line Vac

Brian Farno
Application Engineer Manager
BrianFarno@EXAIR.com
@EXAIR_BF

Need A Flange? We Can Do That!

I recently had a customer call in that was trying to boost an exhaust on a hot operation that he had in his facility.   We discussed what kind of fumes he was trying to evacuate and it appeared at face value that a High Temp Air Amplifier would be the perfect solution for his application.

A Model 121021 1-1/4" High Temp Air Amplifier directs hot air to a rotational mold cavity for uniform wall thickness of the plastic part.
A Model 121021 1-1/4″ High Temp Air Amplifier directs hot air to a rotational mold cavity for uniform wall thickness of the plastic part.

Then the words that strike fear into some manufacturers came out.  The customer asks, do you have any way to put a 4 bolt flange onto the unit so I can mount it straight into my piping system?   My response, “All I need are the dimensions of the flange you need and we will see what is possible.”  After a few further questions and verification, we had a drawing  with dimensions of a Flanged High Temp Air Amplifier.  We sent the drawing to the customer for approval, and once approved, we began to manufacture the custom product and provided it to the customer.  This unit will allow the customer to easily boost the exhaust on his operation and will bolt straight into his piping so there are no worries on his end about exhaust gas escaping.  His 500°F air temperature of the gases are of no concern to this special as it carries with it the high temperature rating of 700°F.  The pictures below show the Special – Flanged High Temp Air Amplifier.

IMG_5290
The air inlet and side view of the Special High Temp Air Amplifier
IMG_5291
Here you can see the low pressure side (intake) of the Special High Temp Air Amplifier.
IMG_5294
The O.D. of the flanges was 6″ with 4 – 3/4″: bolt holes. The Bolt holes were not required to align with the opposing side.

If you think there is no way we can find a product that will fit your compressed air application, or adapt a product to fit then give us a call, you might just be surprised at what we can offer in a quick turn around.

Brian Farno
Application Engineer Manager
BrianFarno@EXAIR.com
@EXAIR_BF