When seeking a suitable solution for cooling or drying your parts, you may be tempted to try out a low-cost fan to get the job done. While fans do a great job of keeping you cool during the warmer months, they’re not the best choice for cooling or drying parts. Have you ever noticed that when standing in front of a fan the flow pattern is not consistent? This is due to the nature in which the fan blades create that air flow by “slapping” the air as they spin rapidly. The air flow that exits from the fan is turbulent and is not as effective as the laminar air flow pattern that is produced by EXAIR’s Super Air Amplifier. The Super Air Amplifier utilizes a patented shim design that maintains a critical position of the air gap and creates a laminar air flow pattern that will exit the outlet of the unit.
In addition to providing laminar air flow more conducive for cooling and drying, the Super Air Amplifier provides much more air that can be directed at the target. A standard 2.36” x 2.36” DC operated fan provides anywhere from 12-27 CFM at the outlet, depending on the model. For comparison, a Model 120022 2” Super Air Amplifier will provide 341 SCFM at the outlet when operated at 80 psig. At just 6” away from the outlet, this value increases to 1,023 SCFM!! When compared to the fan outlet air flow, the Super Air Amplifier produces more than an 1,100% increase in air volume!
When replacing a fan with a Super Air Amplifier, the process time can be dramatically reduced. The increase in air volume significantly reduces the contact time that your part will need to be exposed to the air flow, allowing you to increase your line speed and decrease the overall production cost of the part. This is achieved due to the nature in which a Super Air Amplifier draws in air from the ambient environment. At amplification ratios as great as 25:1, the Super Air Amplifier is the best way to move a lot of air volume across the part with very little compressed air supplied to it. Check out the video
In addition to providing laminar airflow and increasing the volume of air, the Super Air Amplifier is also infinitely adjustable through one of two ways. Each size Super Air Amplifier has a shim set that can be purchased. Swapping out the stock shim for a thinner shim will reduce the compressed air consumption, force, and flow. Installing a thicker shim will increase it. Additionally, the force and flow can also be adjusted by regulating the input supply pressure through the use of a pressure regulator. With sizes ranges from ¾” up to 8”, there’s a Super Air Amplifier for all applications. Give us a call today to see how you can optimize your process by replacing your fans with one or more Super Air Amplifiers.