Tag: wipe

Super Air Wipe at Sea

Published on by Jordan T ShouseLeave a comment

I recently worked with a Chief Engineer on a large shipping boat who was having issues with water being brought in by the mooring cables. That salt water was getting into the maintenance room where the mooring cables were wound around a large spool. He wanted to remove the water from the cable before it went below deck so the extra water could just run off the deck back into the ocean.

After talking a bit we decided on a 4″ Super Air Wipe constructed of 303 stainless steel. This way the extra water would be removed and any debris the cable pulled in with it.

Mooring Cable going thru a EXAIR Super AirWipe

The Super Air Wipes provide a full 360° conical airflow that is used to blow-off, cool, clean and dry products. A Coanda profile is designed into the body of the unit to maximize entrainment of ambient air as well as give the precision angle for the air to exit from. This gives the air stream impacting the target zone a 30° angle to the surface in order to provide a substantial shear force for debris removal. This also ensures the large volume of ambient air entrained will all travel the correct direction and not become turbulent before impinging on the surface.

To meet all the tasks at hand, the Super Air Wipes are offered in two main materials of construction. Aluminum body with brass air fittings, connected with stainless steel hardware, shim and connecting hose for up to 4” (102mm). As well as 303 stainless steel body with stainless steel bolts, shim, the connecting hose for up to 4” (102mm) and fittings. The stainless-steel components give the units better corrosion resistance, higher temperature ratings, and more durability in harsh industrial environments.

The aluminum Super Air Wipe is available in 11 sizes; the stainless steel Super Air Wipe comes in 5 sizes…all from stock.

EXAIR stocks the aluminum Super Air Wipes with inner diameters from 3/8” (10 mm) for wire and cables up to 11” (279mm) for large pipes and hoses. The aluminum models have a temperature rating up to 400oF (204oC). We also stock the stainless-steel models from ½” (13mm) to 4” (102mm) inner diameters, and they have a temperature range up to 800oF (427oC). If you require different diameters or materials, we can do that as well easily.

With the creation of the Super Air Wipe, uniform cleaning, cooling, and blowing around the outside of parts is a simple task. You don’t have to worry about a variety of nozzles to target the circumference or a fabricated blow-off device that will waste air and take much time out of your day. A simple purchase of the Super Air Wipe Kit will solve the problem and keep production going. If you need help in selecting the proper size or want to know what material we would recommend for your application, contact us.

Jordan Shouse
Application Engineer

Send me an email
Find us on the Web 
Like us on Facebook
Twitter: @EXAIR_JS

Product Discovery: Super Air Wipes

Published on by Brian FarnoLeave a comment

Airflow through the Super Air Wipe

The Super Air Wipes provide a full 360° conical airflow that is used to blow-off, cool, clean and dry products. A Coanda profile is designed into the body of the unit to maximize entrainment of ambient air as well as give the precision angle for the air to exit from. This gives the air stream impacting the target zone a 30° angle to the surface in order to provide a substantial shear force for debris removal. This also ensures the large volume of ambient air entrained will all travel the correct direction and not become turbulent before impinging on the surface.

Easy clam-shell installation

To provide ease of installation, a unique clam-shell design was engineered to provide clamp over installation rather than traditional threading methods. This also permits quick changes in size when needed in the rapid product change environments.

Super Air Wipe Family Photo

To meet all the tasks at hand, the Super Air Wipes are offered in two main materials of construction. Aluminum body with brass air fittings, connected with stainless steel hardware, shim and connecting hose for up to 4” (102mm). As well as 303 stainless steel body with stainless steel bolts, shim, the connecting hose for up to 4” (102mm) and fittings. The stainless-steel components give the units better corrosion resistance, higher temperature ratings, and more durability in harsh industrial environments.

EXAIR stocks the aluminum Super Air Wipes with inner diameters from 3/8” (10 mm) for wire and cables up to 11” (279mm) for large pipes and hoses. The aluminum models have a temperature rating up to 400oF (204oC). We also stock the stainless-steel models from ½” (13mm) to 4” (102mm) inner diameters, and they have a temperature range up to 800oF (427oC). If you require different diameters or materials, we can do that as well easily.

Super Air Wipe Kit

The Super Air Wipe kits to help get the most out of the air wipes. A kit will include the Super Air Wipe, a filter, regulator and shim set. The filter will remove bulk liquids and debris from the compressed air to keep the performance optimal. The regulator is used to fine-tune the force provided by the Super Air Wipe. This helps to not over-use the amount of compressed air required for the job.

With a regulator, you can make fine adjustments to get the proper amount of air. For coarse adjustments, you can add shims to increase the airflow and force. They are easy to install on the Super Air Wipes to allow for applications to have more cooling, faster drying, and better removal for tough debris. For cleanliness and control, the Super Air Wipe Kits would be recommended for your application.

Robotic Welder fitted with EXAIR Super Air Wipe

With the creation of the Super Air Wipe, uniform cleaning, cooling, and blowing around the outside of parts is a simple task. You don’t have to worry about a variety of nozzles to target the circumference or a fabricated blow-off device that will waste air and take much time out of your day. A simple purchase of the Super Air Wipe Kit will solve the problem and keep production going. If you need help in selecting the proper size or want to know what material we would recommend for your application, contact us.

Brian Farno
Application Engineer
BrianFarno@EXAIR.com
@EXAIR_BF

Video Blog: Split Ring Design of the Super Air Wipe Eases Installation

Published on by Brian FarnoLeave a comment

This video showcases just how easy it is to install a Super Air Wipe or a Standard Air Wipe onto an extrusion line.  The split ring design makes it possible to install or remove from the line without having to thread the product, all within a minute or less.

If you would like to discuss your application, or any point of use compressed air application, please contact us.

Brian Farno
Application Engineer
BrianFarno@EXAIR.com
@EXAIR_BF

Super Sized Is Not A Problem At EXAIR

Published on by Brian FarnoLeave a comment

For many years we as Americans wanted to biggie size, super size, or mega size anything and everything we could.   For myself that mainly meant the fries and drink I used to get at any local fast food joint.   Now that I have hit my mid-30s and all of that has started to catch up to me, I don’t always want the large fry or any fries at all, instead I might try a new salad and trying to eat healthy.  Here at EXAIR, we don’t always associate bigger with better but we do always fill the need when we don’t have something off the shelf.

However, there are still occasions where going super size is necessary and this week, we did just that.   We had a customer ask if we can go bigger on our Super Air Wipes.   We simply asked how big they needed to go and what the reasoning is for it.  Turns out, the reasoning for the larger Super Air Wipe was a newly designed automated cell in a pipe manufacturing facility.   The stock 11″ was too small to fit the 11″ max. diameter piece through to blow off debris so they requested a 12″ Super Air Wipe.   To top off the customization, they were also in need of BP threaded air inlets.

Catalog 30 Stock Air Wipe Sizes

Within a matter of weeks our customer has gone from a product they didn’t know was possible, to shipping out to their site.  This is a one off, custom machined, Super Air Wipe that has a 12″ Throat Diameter.   The only parts on this that are from our standard stock are the bolts, stickers, and the connecting / hinge plates(The clam shell design requires these.).

If you have an application where you don’t think we have exactly what you need or maybe you need to go bigger, or smaller, than what we show in the catalog don’t move on and try to find something else.   Give an Application Engineer a call and we will see how we can tailor our products to your exact needs.

Brian Farno
Application Engineer Manager
BrianFarno@EXAIR.com
@EXAIR_BF