Anyone who’s ever cooked, hunted, crafted, fished, whittled, opened a well sealed package, or sharpened a stick for roasting marshmallows knows what I mean. A dull knife requires more force to cut your material, which means that you’re using less of your muscle strength to control the blade. If you’re not sure of where the blade is going, that’s a heck of a thing to leave to chance, especially if you’re holding what you’re cutting in your other hand.
Even if (I might even say “especially if”) you don’t use a knife for cutting every day, the conventional wisdom dictates that you should keep its blade sharp. Not only is this imperative for safety reasons (see above,) but you’re going to make a MUCH higher quality cut as well.
Sharp blades result from high quality material that is professionally crafted, and expertly maintained. The cheaper the material, the easier the blade will dull. High carbon stainless steel blades cost a little more, but they’re also easier to sharpen, and they stay sharp longer. A decent stamping machine can turn out hundreds of blades an hour, but forging a single piece of metal results in a level of hardness that is much more conducive to maintaining a sharp edge. Speaking of maintaining a sharp edge, that’s going to be left up to the user. A lot of hardware stores provide sharpening services, but it’s not all that hard. Expert results can be obtained by following what the experts do, and the Boy Scouts of America have taken pride in doing stuff like this for over a hundred years now. Full disclosure: I’ve been a Scout Leader for over nine years now, so I may be biased, but I am unapologetically so. I use these tips, and my pocketknife is VERY sharp.
High quality material, professionally crafted and expertly maintained, is, of course, a successful recipe for a great many products other than knife blades. EXAIR applies these principles to every single item in our 168-page catalog of Intelligent Compressed Air® Products. Here are just a couple of examples:
*The Super Air Knife (no relation to the cutting tools discussed above) is available in a range of materials: aircraft grade aluminum, types 303 or 316 stainless steel, or PVDF. They’re engineered for maximum efficiency, minimum noise level, and manufactured to exacting quality standards.
*The Heavy Duty HEPA Vac System turns your open top drum into a powerful, high capacity, dust free, industrial vacuum. It’s made of a hardened alloy for superior abrasion resistance, and, with no moving parts, it’s virtually maintenance free.
I could go on, but these are the two products, and the benefits they provide, that I’ve actually discussed with potential users just today. If you’d like to know more about how EXAIR products can keep the use of your compressed air sharp, effective, and safe, give me a call.