Wet-Dry Vacuum Converts Without Tools in 15 Seconds or Less!

In a recent video, I showcased our newest Industrial Housekeeping product, the EasySwitch Wet-Dry Vac. Throughout my years in metalworking as well as homeownership, I have honestly never used a wet-dry vacuum that is this easy to change operating modes from wet to dry or vice versa. So just how easy is it?

EasySwitch Wet-Dry Vac Mode Change Instructions

When writing out instructions on how to do this it takes a total of five steps for either direction. These five steps can easily be completed in less than 15 seconds and best of all, it is tool-free.

When changing over other wet/dry vacuums, whether it is a traditional electric vacuum like you may have at home or another pneumatic industrial vacuum on the market, the switchover process is cumbersome. There are typically fasteners or retainers that are necessary to hold the filters in place, filters can be poor quality and get damaged easily.  Small parts needed to hold filters in place like springs or retainer nuts can easily be lost, hard to manipulate and take additional time changing from liquid to dry modes or vice-versa. With the EasySwitch, the only fastener is a rubber latch that is attached to the filter hatch cover. This means operators can’t lose parts because they are all attached to the EasySwitch Lid. To convert from a dry vacuum to a wet vacuum the steps are simple.

  1. Turn off the compressed air and unlatch the rubber handle. This makes it possible to complete step two.
  2. Lift the filter hatch lid and let it rest on the hinge stop. This is all designed to be robust enough to easily support the weight of the EasySwitch unit as well as the air hose attached to it.
  3. Lift the filter, whether it is the HEPA rated filter or the standard filter, up and out of the lid.
  4. Close the filter hatch lid onto the edge gasket that stays firmly in place.
  5.  Latch the rubber handle/latch back into place and start processing liquid as needed.

That’s it, it takes less than 15 seconds in the video below (see it at 1:15) and I am pretty sure a speedcuber or cup stacker could do it even faster. Don’t believe me, want to test it out for yourself, we honor a 30-day guarantee on stock products. Get the EasySwitch Wet-Dry Vac in your facility and put it through your own rigorous testing. If it doesn’t perform to your liking, let us know and we will arrange for sending it back. Converting the vacuum from dry to wet isn’t the only thing that is fast, we also ship same day on orders for stock products (hint: all EasySwitch vacuums are stock product) received by 3 PM ET that are shipping within the US. (2 PM ET for orders billing and shipping to Canada.)

Brian Farno
Application Engineer
BrianFarno@EXAIR.com
@EXAIR_BF

 

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s