Wet-Dry Vacuum Converts Without Tools in 15 Seconds or Less!

In a recent video, I showcased our newest Industrial Housekeeping product, the EasySwitch Wet-Dry Vac. Throughout my years in metalworking as well as homeownership, I have honestly never used a wet-dry vacuum that is this easy to change operating modes from wet to dry or vice versa. So just how easy is it?

EasySwitch Wet-Dry Vac Mode Change Instructions

When writing out instructions on how to do this it takes a total of five steps for either direction. These five steps can easily be completed in less than 15 seconds and best of all, it is tool-free.

When changing over other wet/dry vacuums, whether it is a traditional electric vacuum like you may have at home or another pneumatic industrial vacuum on the market, the switchover process is cumbersome. There are typically fasteners or retainers that are necessary to hold the filters in place, filters can be poor quality and get damaged easily.  Small parts needed to hold filters in place like springs or retainer nuts can easily be lost, hard to manipulate and take additional time changing from liquid to dry modes or vice-versa. With the EasySwitch, the only fastener is a rubber latch that is attached to the filter hatch cover. This means operators can’t lose parts because they are all attached to the EasySwitch Lid. To convert from a dry vacuum to a wet vacuum the steps are simple.

  1. Turn off the compressed air and unlatch the rubber handle. This makes it possible to complete step two.
  2. Lift the filter hatch lid and let it rest on the hinge stop. This is all designed to be robust enough to easily support the weight of the EasySwitch unit as well as the air hose attached to it.
  3. Lift the filter, whether it is the HEPA rated filter or the standard filter, up and out of the lid.
  4. Close the filter hatch lid onto the edge gasket that stays firmly in place.
  5.  Latch the rubber handle/latch back into place and start processing liquid as needed.

That’s it, it takes less than 15 seconds in the video below (see it at 1:15) and I am pretty sure a speedcuber or cup stacker could do it even faster. Don’t believe me, want to test it out for yourself, we honor a 30-day guarantee on stock products. Get the EasySwitch Wet-Dry Vac in your facility and put it through your own rigorous testing. If it doesn’t perform to your liking, let us know and we will arrange for sending it back. Converting the vacuum from dry to wet isn’t the only thing that is fast, we also ship same day on orders for stock products (hint: all EasySwitch vacuums are stock product) received by 3 PM ET that are shipping within the US. (2 PM ET for orders billing and shipping to Canada.)

Brian Farno
Application Engineer
BrianFarno@EXAIR.com
@EXAIR_BF

 

Two Vacuums For The Price Of One

I recently noticed on my mortgage statement that I own more of my house than the bank does now. That made me feel good, and it also gave me pause for a moment of reflection on all the adventures I’ve had as a suburban American homeowner.  Good times…then, another adventure happened:

I’m in the middle of a major (to me) construction project in our house. Now, if you’ve ever worked with drywall, you know that anything you do to it creates dust….sometimes in great volume. No worries, though – I’ve got a real nice portable wet/dry vacuum that makes light work of drywall dust & scrap. So, when I’m done for the day, I leave the area as dust-free and tidy as it was before (“tidy” is relative…there are two teenagers and a dog in my house.)

For the record, the dog was more interested in the new hole in the wall than the teenagers.
For the record, the dog was more interested in the new hole in the wall than the teenagers.

Anyway, the adventure happened last Saturday morning, when the basement sump high level alarm went off. I had to get the water out of the sump, and fast, so I could find out what was wrong with my sump pump. No problem…I’ve got that real nice portable wet/dry vacuum, right? That was full of drywall debris. So, I hastily dumped it into the garage trash can (making another mess I had to clean up later) and removed the particulate filter so I could drain the sump. Which it did, like a champ. It was a stuck float on the sump pump, which I remedied quickly, and all was well with the world again. At least in my (and my bank’s) almost 1/4 acre of it.

Speaking of the different things you can use vacuums for, I had the pleasure of talking with a caller the other day about industrial vacuum applications. When they wash down a particular area of their facility, they end up with puddles of water, mixed with lots of solid debris, all over the floor. They were using electric wet/dry vacuums (like mine) but had a recent scare involving a damaged power cord on a wet floor. Luckily, someone saw it before anything bad happened, but it made them think about other options…like compressed air operated Industrial Vacuums.

They looked at some dual Venturi systems, which would indeed replicate the function of their electric vacs, but at a considerable rate of compressed air consumption…over 100 SCFM (over 25HP worth of typical industrial air compressor load.) Their compressed air system simply didn’t have the capacity for this. They already had an EXAIR Reversible Drum Vac, and had plenty of capacity to run it since it only requires 19 SCFM @80psig (about 5HP worth of compressor load,) but it wasn’t greatly effective at picking up the solid debris. That’s where the EXAIR Chip Vac comes in to our story…it uses only 40 SCFM @80psig (about 10HP worth of compressor load) to clean up the solid debris that doesn’t get sucked up with the puddles of water & sludge that the Reversible Drum Vac takes care of.

Reversible Drum Vac (left) and Chip Vac (right) – two EXAIR Industrial Vacuums for lower cost (purchase AND operation) than wet-dry combo air operated vacuums.

And…(back to the title of this blog)…a Reversible Drum Vac AND a Chip Vac STILL cost less to purchase than the dual Venturi system they were looking at. Lower purchase cost. Lower operating cost. Two independent systems. That’s a win-win-win.  If you have wet…dry…or wet & dry…messes to clean up, give me a call.

Russ Bowman
Application Engineer
Find us on the Web
Follow me on Twitter
Like us on Facebook