How To Choose An Air Knife

The EXAIR Super Air Knife has a prominent place near the front of our catalog, and THIRTEEN pages of photos, application details, performance data & specifications. It’s the most efficient and quietest product of its kind on the market, and our most diverse product offering in terms of size range, operational adjustability, materials of construction, and accessories available. For almost any general industrial air blow off application, the EXAIR Super Air Knife is the superior choice in terms of air usage, sound level, and capability.

EXAIR Super Air Knives come in a wide range of lengths, for a wide range of possibilities.
EXAIR Super Air Knives come in a wide range of lengths, for a wide range of possibilities.

As tireless champions of the causes of reducing air consumption and noise, we’re always going to promote these benefits of the Super Air Knife. Still, a caller asked me the other day, “Well, why do you still make the others?”…meaning, of course, our Standard and Full Flow Air Knives. Why, indeed:

*Given the same air supply pressure, the Standard Air Knife generates the highest force of our three styles. The amount of force applied isn’t always a prime consideration…if you think about one of the more “textbook” applications for an Air Knife, it doesn’t take a great amount of force to blow off dust and light debris from a conveyor belt…certainly this is a case where efficiency factors in: the lower air consumption of a Super Air Knife can pay for the cost difference between it and a Standard Air Knife in as little as three months of operation.

The Standard Air Knife has the highest force, for when it's needed.
The Standard Air Knife has the highest force, for when it’s needed.

Of course, if you’re blowing stubborn debris out of tight spaces, like gummy, greasy dirt that’s accumulating in the recesses of a finned tube heat exchanger, that extra force can make all the difference. No; the Standard Air Knife isn’t as efficient or quiet as the Super Air Knife, but it’s still a far cry better than a drilled pipe.

*While the Super Air Knife is pretty compact – you only need a few square inches of profile area to successfully mount it – the Full Flow Air Knife is even smaller, requiring not much more than one square inch of profile for mounting. With ports on the rear face (instead of the ends & bottom for the Super Air Knife,) they can fit in very tight quarters.

Low profile and lightweight, the Full Flow Air Knives are a great fit for tight quarters.
Low profile and lightweight, the Full Flow Air Knives are a great fit for tight quarters.

The Full Flow Air Knife is also the lightest weight for a given length. A 36” Aluminum Super Air Knife, for instance, weighs about 8lbs. The 36” Aluminum Full Flow Air Knife weighs less than 4lbs. Most of the time, 8lbs is a very manageable amount of mass to support, but there are situations where every ounce matters, and if yours is one of them, you’re looking at the Full Flow Air Knife all the way.

*The biggest (in the most literal sense) factor in Air Knife selection is, well…size. We make the Standard Air Knives in lengths to 48”, and the Full Flow Air Knives come as long as 36”. The Super Air Knives, however, are stocked in lengths from 3” to 108”, and can be coupled together for as long of an uninterrupted, steady, laminar air flow as you need.

At the end of the day, a majority of blow off applications can be handled just fine with any of our Air Knives. If you’d like to discuss your application and see which one is best for you, give us a call.

Russ Bowman
Application Engineer
(513)671-3322 local
(800)923-9247 toll free
Find us on the Web
Follow me on Twitter
Like us on Facebook