Compressed Air Leaks and the Problems They Cause

Over the Fourth of July I had a great opportunity to do some backpacking in the backwoods of the Adirondack Mountains in Upstate New York. “That sounds awesome!” is what most people would think; looking back on it, it was awesome. BUT, at the time it was the very definition of complete and total suffer fest. During my time on the trail, I learned three life lessons. First, always thoroughly study up on every bail out point along the trail. Second, water proofing has its limits; and thirdly, when things leak it is dreadful. After 7 miles of crawling over rocks and traversing lakes and streams in the pouring down rain everything was soaked and water was leaking through our rain jackets, leaving me and my girlfriend cold, wet, and sore as all get out – all on day one.

Heading up the Algonquin Mountain trail starting Colden Lake

Leaks don’t just stink when they appear in your rain coat, they are dreadful all around whether it is leaking faucets, a leaky basement or compressed air line leaks. Unlike the fact that I currently have no solution for the leaking rain coat, I do have a solution for your leaking air lines. Leaks are costly and an all-around waste of money that can have severe implications on how the air is being used and the entire system itself.

There are four main affects that a leak in your compressed air system can have and they are as follows; 1) leaks can cause a pressure drop across the system, 2) leaks shorten the life of almost all air supply system equipment, 3) leaks demand increased running time of the compressor, and 4) leaks produce unnecessary compressor capacity by demanding more and more air.

  • A pressure drop across your compressed air system can lead to a decreased efficiency of the end use equipment (i.e. an EXAIR Air Knife or Air Nozzle). This adversely effects production as it may take longer to blow off or cool a product or not blow off the product well enough to meet quality standards.
  • Leaks can shorten the life of almost all supply system components such as air compressors. This is because the compressor has to continuously run to make up for the air lost from leaks. By forcing the equipment to continuously run or cycle more frequently means that the moving parts in the compressor will wear down faster.
  • An increased run time due to leaks can also lead to more maintenance on supply equipment for the same reasons as to why the life of the compressor is shortened. The increase stress on the compressor and supply side components due to unnecessary running of the compressor.
  • Leaks can also lead to adding unnecessary compressor size. The wasted air that is being expelled from the leak is an additional demand in your system. If leaks are not fixed it may require a larger compressor to make up for the loss of air in your system.
EXAIR’s Ultrasonic Leak Detector

It is fairly easy to find these leaks, simply use EXAIR’s affordable Ultrasonic Leak Detector. This leak detector uses ultrasonic waves to detect where costly leaks can be found so that they can be patched or fixed. So don’t get stuck in some rainy day with your compressed air leaking everywhere; find those pesky leaks, mark them for maintenance and seal them up.

If you have any questions or want more information on EXAIR’s Ultrasonic Leak Detector or like products. Give us a call, we have a team of application engineers ready to answer your questions and recommend a solution for your applications.

Cody Biehle
Application Engineer
EXAIR Corporation
Visit us on the Web
Follow me on Twitter
Like us on Facebook

EXAIR Product Overview: Mufflers

Noise, we all hate it to some extent. From the hustle and bustle of crowed streets to the whine of a jet engine noise has plagued the world for eons leaving people to search for a way to escape into a moment of peace and quiet. The majority of people that I know pack their massive over sized backpacks and head deep into the mountains for days on end to escape the noise sometimes traveling for 10+ miles at a time. But how can we help eliminate this monstrosity that we have created in our manufacturing environments? The answer is mufflers, and no I don’t mean your car muffler (although they do the same thing) I mean compressed air mufflers. Compressed air can be a loud utility inside of a plant environment and exceed the OSHA guidelines for personnel noise exposure. But this noise can easily be mitigated with the use of Intelligent compressed air products and mufflers.

Big Sandy Lake Trail – Wind River Range State Park, WY

OSHA Standard 29 CFR 1910.95(a) outlines the total noise exposure to a particular noise level per day and dictates that noise exposure at or above 85 decibels require ear protection. By placing a muffler on the end of the pipe one can reduce the sound level significantly to the point it could be the difference between having to wear ear protection and not having to. With that being said EXAIR offers four different types of mufflers to choose from and they are Reclassifying, Sintered Bronze, Straight-Through, and Heavy Duty.

Reclassifying mufflers offer the best noise reduction at 35 dB and have the added benefit of removing oil mist from the air line. This means that the Reclassifying mufflers are ideal for pneumatic cylinders. Per OSHA Standard 29 CFR 1910.1000 worker shall not be exposed to more than 5mg/m3 of oil by volume in a 40-hour work week. The patented design of the removable element separates oil from the exhausted air and meets or exceeds the OSHA Standard.

Sintered Bronze Mufflers are an excellent low-cost solution which can be easily installed into your current existing ports. These mufflers also come in the largest variety of different sizes ranging from thread sizes of #10-32 to 1.5” NPT. Also, the Sintered Bronze Mufflers are specifically designed to provide the minimal amount of back pressure and restriction. The main difference between these mufflers and the reclassifying is that the Sintered Bronze Mufflers cannot collect oil out of the exhaust.

The quick pick chart for easily choosing which muffler you need

If the process air needs to be directly plumbed away from personnel, then the Straight-Through Muffler is the way to go. Straight-Through Mufflers are ideal for situations that require both a threaded inlet and exhaust. In most applications you will see the Straight-Through Muffler pair with our E-Vac vacuum generators or Vortex Tubes to provide noise reduction of the unit. All in all, the Straight-Through Muffler can reduce noise levels up to 20 dB.

Model 3913 Straight-Through Muffler

Lastly, the Heavy Duty Muffler provides a corrosion resistant aluminum outer shell with a stainless steel inner screen. This design allows the muffler to catch any contaminants such as rust from being ejected potentially causing harm or quality defects. Typically, this muffle will reduce noise levels up to 14 dB.

Model 3903 Heavy Duty Muffler

If you have any questions or want more information on EXAIR’s E-Vacs and their Accessories. Give us a call, we have a team of application engineers ready to answer your questions and recommend a solution for your applications.

Cody Biehle
Application Engineer
EXAIR Corporation
Visit us on the Web
Follow me on Twitter
Like us on Facebook