A dear friend is turning 50 this month, and I have no intention of making a big deal of it, considering the spectacle that her husband (who is younger than both of us) is no doubt going to make of it. I was reminded of her impending birthday when I read that Alvin is also turning 50 this year.
Alvin (DSV-2) is a deep-dive submersible, built in 1964. Built to dive to depths of over 8,000 feet, Alvin has had quite a storied career:
- 1966 – Used to locate a hydrogen bomb that was lost off the coast of Spain when a US Air Force bomber “had an accident.” The bomb was retrieved a few weeks later, without incident.
- 1967 – On dive #202, Alvin was attacked by a swordfish, at a depth of about 2,000 feet. The swordfish became entangled, forcing an emergency surface. Upon removal, the swordfish was cooked for dinner.
- 1968 – Alvin’s tender ship accidentally dropped Alvin when some steel cables snapped, in the middle of the ocean. Three crew members onboard at the time were able to escape, but left their lunches behind. Severe weather and the development of the required technology put off Alvin’s recovery for almost a full year. A full rehab of the vessel was slated. The fruit and sandwiches left behind were found to be well preserved, and soggy but edible.
- 1986 – Alvin was used to find the wreckage of the Titanic. While the mission was making headlines at the time, it was actually a cover story for the highly classified “real” operation: the search for USS Scorpion (SSN-589), lost under unknown circumstances in 1968. In a remarkable stroke of good fortune, both vessels were found.
That’s all neat stuff, but I’m sure there are a few spine tingling stories we’ll never hear about a deep submergence vessel, operated by the US Navy, during the height of the Cold War. Another bit of interesting trivia, though, is who built Alvin: General Mills. That’s right, the breakfast cereal folks. Turns out, they had an electromechanical division back then that pioneered advances in packaging technology, and had previously applied some of their mechanical arms to other submersibles, leading them to successfully bid the project that Alvin was born from.
This, of course, is what engineers do. EXAIR has been making Intelligent Compressed Air Products, aimed at optimizing compressed air use, increasing safety, and lowering noise levels for over 31 years now. Along the way, we’ve added products, and added TO our products to meet other frequent needs of our customers.
Consider the Air Knife: the Air Knife had been a product for years when EXAIR developed the Ionizing Bar and added it to the Air Knife to turn it into an efficient, quiet, and safe Static Eliminator. The Air Knife then provided good information toward development of the super efficient Super Air Knife which has become the hallmark of efficiency and performance within industry. After years of successfully solving thousands upon thousands of static dissipation applications with the Super Air Knife, we recently added one-piece designs from 60 – 108” long which used to be a two piece construction.
A quick look at our complete and comprehensive line of Static Eliminator products shows that, if you’ve got a static problem – big or small – we’ve likely got a solution for it.