Super Air Nozzles and Stay Set Hoses to Replace Open Tubes

I recently worked with an company that performs energy audits and they were working with a food company to review and propose ways to reduce the energy consumption throughout the plant. One area where we were able to help was on an onion peeling machine, shown below:

Vegetable Peeler Wide
Onion Peeler With Screw Conveyor and Blow off Tubes

The area of machine in question used a screw conveyor and friction source to help loosen the peels and fifteen (15) 1/4″ O.D. open ended tubes, which were noisy and unsafe, to blow the peels completely off and away form the onion. The auditor was able to install an air flow meter on the system and found that the machine was consuming 220 SCFM of compressed air for this operation.

Vegetable Peeler Detail
(15) Total, 1/4″ Tubes Used to Blow Air and Help Remove the Peels

We proposed to replace the tubes with a 6″ Stay Set Hose and the model 1103 Mini Super Air Nozzle.  Each model 1103 Mini Super Air Nozzle will consume just 10 SCFM of 80 PSIG compressed air. Attached to the 6″ Stay Set Hose, the nozzle can be placed exactly where needed and aimed appropriately. A strong blast of air rated at 0.56 lbs (9 ozs.), and ultra quiet at 71 dBA, the Mini Super Air Nozzle delivers the results needed.

1103-e1543953915424.jpg
Model 1103 – Mini Super Air Nozzle

1103 Performance

1103 Pattern

9256
Model 9256 6″ Stay Set Hose

The Stay Set Hose has “memory” and will not creep or bend, simply install the 1/4 NPT fitting into the compressed air supply side, an thread the 1/8 NPT Mini Super Air Nozzle into the other end and position as needed!

Fifteen (15) of the Mini Super Air Nozzles will pass 150 SCFM of compressed air compared to the current usage of 220 SCFM, resulting in a 70 SCFM drop, or a 31.8 % reduction.  At a typical cost of $0.25 per 1000 Cubic Feet of Compressed Air, the nozzles would save $1.05 per hour of operation. Rate of Return yields a full pay-off in just 43 days of operation (24 hours per day operation)!

If you are looking for ways to save on compressed air usage in your facility that is safe to operate and quiet to use, we will have a solution for you.

If you have questions about any of the 16 different EXAIR Intelligent Compressed Air® Product lines, feel free to contact EXAIR and myself or any of our Application Engineers can help you determine the best solution.

Brian Bergmann
Application Engineer
Send me an email
Find us on the Web 
Like us on Facebook
Twitter: @EXAIR_BB

 

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s