Tag: high force air nozzles

Super Air Nozzles and Stay Set Hoses to Replace Open Tubes

Published on by Leave a comment

I recently worked with an company that performs energy audits and they were working with a food company to review and propose ways to reduce the energy consumption throughout the plant. One area where we were able to help was on an onion peeling machine, shown below:

Vegetable Peeler Wide
Onion Peeler With Screw Conveyor and Blow off Tubes

The area of machine in question used a screw conveyor and friction source to help loosen the peels and fifteen (15) 1/4″ O.D. open ended tubes, which were noisy and unsafe, to blow the peels completely off and away form the onion. The auditor was able to install an air flow meter on the system and found that the machine was consuming 220 SCFM of compressed air for this operation.

Vegetable Peeler Detail
(15) Total, 1/4″ Tubes Used to Blow Air and Help Remove the Peels

We proposed to replace the tubes with a 6″ Stay Set Hose and the model 1103 Mini Super Air Nozzle.  Each model 1103 Mini Super Air Nozzle will consume just 10 SCFM of 80 PSIG compressed air. Attached to the 6″ Stay Set Hose, the nozzle can be placed exactly where needed and aimed appropriately. A strong blast of air rated at 0.56 lbs (9 ozs.), and ultra quiet at 71 dBA, the Mini Super Air Nozzle delivers the results needed.

1103-e1543953915424.jpg
Model 1103 – Mini Super Air Nozzle

1103 Performance

1103 Pattern

9256
Model 9256 6″ Stay Set Hose

The Stay Set Hose has “memory” and will not creep or bend, simply install the 1/4 NPT fitting into the compressed air supply side, an thread the 1/8 NPT Mini Super Air Nozzle into the other end and position as needed!

Fifteen (15) of the Mini Super Air Nozzles will pass 150 SCFM of compressed air compared to the current usage of 220 SCFM, resulting in a 70 SCFM drop, or a 31.8 % reduction.  At a typical cost of $0.25 per 1000 Cubic Feet of Compressed Air, the nozzles would save $1.05 per hour of operation. Rate of Return yields a full pay-off in just 43 days of operation (24 hours per day operation)!

If you are looking for ways to save on compressed air usage in your facility that is safe to operate and quiet to use, we will have a solution for you.

If you have questions about any of the 16 different EXAIR Intelligent Compressed Air® Product lines, feel free to contact EXAIR and myself or any of our Application Engineers can help you determine the best solution.

Brian Bergmann
Application Engineer
Send me an email
Find us on the Web 
Like us on Facebook
Twitter: @EXAIR_BB

 

Small, Precise Blowoff at Your Fingertips

Published on by Leave a comment

For many blowoff applications, stronger isn’t necessarily better.  For applications and processes where a light, but effective blast of air is needed for cleaning and drying, the VariBlast Compact Safety Air Gun with the Atto, Pico, or Nano nozzle fits the bill. The smallest of the EXAIR engineered Super Air Nozzle family, the Atto, Pico, and Nano have been designed to provide the smallest, most precise blowoff possible. The focused airflow pattern allows for very accurate control and placement of the air stream.  The nozzles are available in both Type 316 Stainless Steel and PEEK plastic (useful for harsh environments, and is non-marring)

img_7480.jpg
The Atto, Pico, and Nano Super Air Nozzles (Scale is in Inches)

The new VariBlast Compact Safety Air Gun is a great choice for putting the power and performance of the nozzle into a small and lightweight air gun. Designed with a variable flow trigger, the airflow can be throttled from a whisper to full force, simply by varying the trigger pull distance.

1698SS
VariBlast Model 1698SS, with Stainless Steel Nano Super Air Nozzle

The Atto, Pico, and Nano nozzles use very little compressed air and are extremely quiet, easily meeting OSHA Standard 29 CFR 1910.95(a) for Noise Exposure.  The design incorporates engineered solutions for safety and can be supplied with higher pressure compressed air and meet OSHA Standard 29 CFR 1910.242(b), relating to dead end pressure requirements.

The table below provides performance data, including the compressed air consumption, force, and sound level for the various configurations.

VariBlast With Small Nozzles

Note that the VariBlast air guns can be had with extensions from 6″ to 72″ and chip shields to meet the performance and safety needs of any application.

The Atto, Pico and Nano Nozzles can also be configured to work with the Soft Grip style of Safety Air Gun.  Consult an Application Engineer for assistance in choosing.

If you have any questions about the Atto, Pico, or Nano nozzles, the VariBlast Compact Safety Air Gun, or any EXAIR compressed air product, feel free to contact EXAIR and myself or one of our Application Engineers can help you determine the best solution.

Brian Bergmann
Application Engineer

Send me an email
Find us on the Web 
Like us on Facebook
Twitter: @EXAIR_BB

EXAIR Flat Super Air Nozzles – Adjustable, Flexible and Powerful

Published on by Leave a comment

As an Application Engineer here at EXAIR, we get calls from customers looking for an air knife, but shorter than our typical 3″ stocked size.  We can make an air knife to any length needed, but we will look at the 1″ and 2″ Flat Super Air Nozzles as a possible solution.

Like an air knife, the Flat Nozzles provide a wedge shaped pattern of air that maintains the width of the nozzle, to create a concentrated, powerful air flow.  Thus, a 1″ Flat Super Air Nozzle has air stream 1″ wide, and the 2″ Flat Super Air Nozzle has one 2″ wide.

The Flat Super Air Nozzles are available in zinc aluminum alloy or type 316 stainless steel construction, to meet environmental conditions of the process.  Both the 1″ and 2″ nozzles contain a changeable, patented shim that maintains the critical air gap, which allows the release of a precise amount of air through the thin slot, across a flat surface. The result is a wide, forceful stream of high velocity, laminar airflow, with minimal air consumption and noise.

2fsanfam2
1″ and 2″ Flat Nozzles, in Zinc aluminum Alloy and Type 316 Stainless Steel

Shims are available in thicknesses of 0.005″, 0.010″, 0.015″, 0.020″, 0.025″, and 0.030″.  Shim Sets with either 2 or 3 shims are available for both sizes to allow for adjustment of the performance to best meet the application need.

1fsanshim
Patented, Interchangeable Shims

Table below shows the stock offerings of 1″ and 2″ Flat Super Air Nozzles, along with Air Consumption, Force and Sound Level data for your review.

Flat Nozzle Table

If you have any questions about the Flat Super Air Nozzles, or any EXAIR nozzle or other compressed air product, feel free to contact EXAIR and myself or one of our Application Engineers can help you determine the best solution.

Brian Bergmann
Application Engineer

Send me an email
Find us on the Web 
Like us on Facebook
Twitter: @EXAIR_BB

Flat Super Air Nozzles – Quiet and Forceful and Adjustable

Published on by Leave a comment

The 2″ Flat Super Air Nozzle is a very powerful yet quiet engineered nozzle.  Operation at 80 PSIG of compressed air pressure yields a strong 1.38 lb. of force, at only 77 dBA of sound level.  Compare this with many of the plastic flat nozzles that blow air through a series of holes, with sound levels ranging form 78-83 dBA, not to mention some might violate the OSHA dead ended pressure standard and results in fines being levied.

The patented technology utilizes a changeable shim to generate the high flow of air in a smooth and laminar flow, to keep noise down and power and strength up. With (6) stainless steel shim thicknesses available, the 2″ Flat Super Air Nozzle offers a very flexible package that can be set and tuned to meet exacting performance criteria, while using the minimum amount of compressed air, and at the quietest possible sound levels.

2 Inch Flat
2″ Flat Super Air Nozzle

The model 1122 is offered in a zinc aluminum alloy body and cap, and the 1122SS is constructed from type 316 stainless steel.  All shims are stainless steel. The shim thickness for the 1122/1122SS is 0.015″ thick.

Also available, for extra blowing force, are the HP1125 and HP1125SS.  The nozzles utilize the same zinc aluminum alloy or stainless steel body and cap and have the 0.025″ shim installed – and deliver 2.2 lbs of force, while only increasing sound levels to 83 dBA.

Shim sets for any of the 2″ Flat Super Air Nozzles are available.  The 1132SS shim set includes shims of thickness of 0.005″, 0.10″, and 0.020″.  For higher force levels, the HP1132SS shim set includes the 0.020″ and 0.030″ shims.

1132ss
Shims are available, from 0.005″ up to 0.030″ for maximum versatility and performance tuning

As you can see- for a versatile, forceful and quiet engineered air nozzle, it is hard to beat the EXAIR 2″ Flat Super Air Nozzle.  If a 1″ wide nozzle better suits your needs, the same flexibility and power can be found in the 1″ Flat Super Air Nozzle as well.  Check it out as well.

If you would like to talk about Flat Super Air Nozzles or any of the EXAIR Intelligent Compressed Air® Products, feel free to contact EXAIR and myself or one of our Application Engineers can help you determine the best solution.

Brian Bergmann
Application Engineer

Send me an email
Find us on the Web 
Like us on Facebook
Twitter: @EXAIR_BB