Adjustable Air Amplifiers Aren’t Just About Adjustability

Adjustability is a key feature for a great many devices:

  • An adjustable wrench – or as I like to call it, the trusty “all 16ths” – is my go-to for work around the house involving anything with a hex…fittings under the sink when I’m cleaning out a drain, nuts & bolts on furniture or household items needing some tightening (or loosening,) etc.  I don’t get out my combination-end wrenches for much except automobile maintenance.
  • Speaking of sinks, my kitchen faucet lets me adjust water flow (and temperature) which is important because I use different flow rates (and temperatures) if I’m getting a tablespoon of water, or if I’m rinsing my hands, or if I’m filling the sink to do dishes.
  • Speaking of tablespoons, I’ve even got an adjustable measuring spoon that lets me get a full tablespoon, a half a teaspoon, or anywhere in between, by moving a lever block back & forth in the spoon head.

Adjustability is a key feature for several EXAIR Intelligent Compressed Air Products too…like our Adjustable Air Amplifiers.  The ‘adjustable’ part has to do with setting the air flow:

Just loosen the locking ring, and you can thread the plug out of, or in to, the body to increase, or decrease the flow and force of the developed flow.  There’s a hole in the plug (opposite the “EXAIR.com” stamp) so you can use a spanner wrench (another adjustable tool!) to thread the plug in or out.

You can get an amazing range of flow from a little twist*:

These are the performance values for a Model 6042 2″ Aluminum Adjustable Air Amplifier with a compressed air supply pressure of 80psig. Regulating the pressure can give you even lower…or higher…flows.                                              *0.002″ to 0.010″ is about 1/4 turn of the plug.

A gap of about 0.010″ is about the max for 80psig supply pressure.  Above that, the air flow overwhelms the Coanda profile, creating a turbulent ‘storm’ in the throat, hampering the efficiency and effectiveness.  The proper “adjustment” for that is to select the next larger Air Amplifier!

While the range of air flow is certainly impressive, their versatility is another major factor in their selection.  I reviewed our Application Database (registration required) for real-life details on Adjustable Air Amplifiers “in the field” and found a litany of other benefits that made them better suited to particular installations than a Super Air Amplifier:

  • A customer who builds automated equipment incorporates the Model 6031 1-1/4″ SS Adjustable Air Amplifier to blow open bags with a puff of air as they move into position on an automated filling machine. They use it because it’s available in stainless steel construction, and it’s still compact & lightweight.
  • A mattress manufacturer uses Model 6043 3″ Aluminum Adjustable Air Amplifiers to  cool mattress springs.  They’re lightweight, the perfect size to match the springs’ profile, and they can “dial them out” for high heat removal before putting springs on a rubber conveyor.
  • A tier 1 automotive supplier has Model 6234 4″ SS Adjustable Air Amplifier Kits installed on their robotic paint line to blow off moisture from parts to prevent water spotting between the wash cycle and the oven.  They use them because the stainless steel construction holds up to high heat due to the proximity to the ovens.
  • A food plant uses Model 6031 1-1/4″ SS Adjustable Air Amplifiers to improve the drying time of 3,000 liter mixers that must be washed between batches of different products.  The stainless steel construction holds up to the rigors of the frequent washdown in this area.
  • A bedding manufacturer replaced a regenerative blower with a Model 6041 1-1/4″ Aluminum Adjustable Air Amplifier for trim removal on stitched fabric at bedding manufacturer.  The blower was prone to failure from lint & dust; the Air Amplifier, with no moving parts, is not.  It’s also compact, lightweight, and virtually maintenance free.
  • A light bulb manufacturer installed Model 6030 3/4″ SS Adjustable Air Amplifiers on the ends of open pipes that were used to cool mercury lamp wicks.  This reduced noise levels significantly while providing the same cooling rate, and the stainless steel construction holds up to the heat of the operation.

Because of the simplicity of their design, Adjustable Air Amplifiers are also extremely adaptable to custom applications.  We’ve added threads or flanges to the inlets and outlets of several different sizes, to accommodate ease of mounting & installation:

Among other custom Air Amplifiers, we’ve put (left to right) threads on the outlet, ANSI flanges on the inlet/outlet, Sanitary flanges on the inlet/outlet, and Sanitary on the inlet/ANSI on the outlet. How are you installing your Air Amplifier?

Adjustable Air Amplifiers are available in both aluminum and 303SS construction, to meet most any environmental requirements…except extreme high heat.  In those cases, the Model 121021 High Temperature Air Amplifier is rated to 700°F (374°C) – significantly higher than the Aluminum – 275°F (135°C) or the Stainless Steel – 400°F (204°C).  They’re commonly used to circulate hot air inside furnaces, ovens, refractories, etc.

A Model 121021 1-1/4″ High Temp Air Amplifier directs hot air to a rotational mold cavity for uniform wall thickness of the plastic part.

Adjustability.  Versatility.  Durability.  If you’d like to know more about the Adjustable Air Amplifier, or any of EXAIR’s Intelligent Compressed Air Products, give me a call.

Russ Bowman
Application Engineer
EXAIR Corporation
Visit us on the Web
Follow me on Twitter
Like us on Facebook

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s