I’m currently in the closing process of selling my first home. This is the house I got married in, brought my first child home to. Needless to say there has been a lot going on to get the place up to selling shape, one of those things was getting the HVAC system checked out to verify its running correctly and efficiently! (Spoiler, mine was running very well thank goodness)
With compressed air being considered a fourth utility its important we check the efficiency of the system and fix issues and install upgrades where we can! EXAIR has six simple steps to optimize your compressed air system. Following these steps will help you to cut electrical costs, reduce overhead, and improve your bottom line. In this blog, I will cover the first step – Measure the air consumption to find sources that use a lot of compressed air.
Data is important to have when diagnosing wasteful and problematic areas within your compressed air system. To measure air consumption, flow meters are used to find the volume or mass of compressed air per unit of time. Flow rates are very useful data points to find problems like leaks, over-use in blow-offs, waste calculations, and comparison analysis.
The first step to optimizing compressed air systems within an industrial facility is to get a known baseline. To do so, utilizing a digital flowmeter is an ideal solution that will easily install onto a hard pipe that will give live readouts of the compressed air usage for the line it is installed on. There is also an additional feature that we offer on the Digital Flowmeters that can help further the understanding of the compressed air demands within a facility.
The Pressure Sensing Digital Flowmeters are available from 2″ Sched. 40 Iron Pipe up to 8″ Sched. 40 Iron Pipe. As well as 2″ to 4″ Copper pipe. These will read out and with the additional Data Logger or Wireless Capability options record the information. When coupled with the wireless capability an alarm can be set for pressure drops that give live updates on the system as well as permits data review to see system trends throughout the day.
Generating a pressure and consumption profile of a system can help to pinpoint energy wasters such as timer-based drains that are dumping every hour versus level based drains that only open when needed. A scenario similar to this was the cause of an entire production line shut down nearly every day of the week for a local facility until they installed flowmeters and were able to narrow the demand location down to a filter bag house with a faulty control for the cleaning cycle.
If you would like to discuss the best digital flowmeter for your system and to better understand the benefits of pressure sensing, please contact us.
Jordan Shouse
Application Engineer
Send me an Email
Find us on the Web
Like us on Facebook
Twitter: @EXAIR_JS
