When discussing ROI, return on investment, for an industrial compressed air system it is necessary to understand what it costs to produce compressed air. Generally we calculate that it costs .25 cents to produce 1,000 SCF (Standard Cubic Feet) of compressed air here in the Midwest of the United States. For our example let’s consider a typical 250 HP industrial compressor running 24 hours per day/5 days per week for 52 weeks. This compressor can generate 374,400,000 SCF per year, using the industry standard utility cost for the Midwest of .25 cents per 1,000 SCF it will cost $93,600 to produce that volume of compressed air.
To avoid wasting money on compressed air generation it is extremely important to eliminate unintended or wasteful compressed air use in your plant. The two main offenders are leaks and open tube blow-offs. While soapy water is a good method for discovering leaks, EXAIR offers the Ultrasonic Leak Detector. This handy device allows leaks to be detected at distances of up to 20′ away! Also consider how safe and convenient it is to find leaks in overhead pipes while standing on the ground instead of on a ladder. Using a tool like this to do an entire system leak audit can easily result in many small leaks being identified and when fixed result in a large savings.
Now let’s look at what an open pipe or tube may consume. A single 1/4″ OD copper tube can use 33 SCFM @ 80 PSIG inlet pressure. Using the manifold pictured above as our example with 13 open tubes, each tube can consume 33 SCFM @ 80 PSI inlet pressure. With 13 open tubes running 24 hours a day, 5 days a week, 52 weeks per year equates to a total consumption of 160,617,600 SCF annually. If we installed the EXAIR model 1100 Super Air Nozzle using a simple compression fitting we would reduce the air consumption dramatically. The EXAIR 1100 Super Air Nozzle consumes 14 SCFM @ 80 PSIG inlet pressure, running 24 hours a day, 5 days a week, 52 weeks per year equates to a total consumption of 68,140,800 SCF annually. That change will save you 92,476,800 SCF annually which is equal to $23,119.20 and 24.7% of air compressor capacity! These calculations are all based on continuous running applications, if intermittent operation is possible consider the EXAIR Electronic Flow Control for even greater savings. The EXAIR Electronic Flow Control combines a photoelectric sensor with timing control that limits compressed air use by turning it off when no part is present
Open pipe blow offs also violate OSHA standard 29 CFR 1910.242(b) requirement for using compressed air for cleaning when pressurized above 30 PSIG. Not to mention they generally are louder than 90 dBA, which is the maximum allowable noise exposure without hearing protection under OSHA standard 29 CFR – 1910.95 (a). The EXAIR engineered Super Air Nozzle is a great way to avoid a OSHA fine.
A great product that will help you keep your fingers on the pulse of compressed air consumption and demand is by incorporating the EXAIR Digital Flow Meter. This handy item mounts directly to the pipe. The digital display shows the amount of compressed air being used in any leg of your distribution system. The Digital Flow Meter is offered in sizes for 1/2″ – 4″ Schedule 40 Iron Pipe and 3/4″ – 4″ Copper Pipe. It also is available with the Summing Remote Display that is prewired with a 50′ cable, it is powered by the Digital Flow Meter and with a push of the button will display either the current compressed air consumption, consumption for the previous 24 hours or the total cumulative usage.
The Digital Flowmeters are also available with wireless capability using the ZigBee mesh network protocol, data can be passed from meter to meter to extend the distance over which the wireless system can operate. Each meter has a range of up to 100′ (30 meters). Or you can opt for the USB Data Logger option. The USB Data Logger can store approximately 9 hours of readings if set to sample once every second or up to 2 years if sampled every 12 hours.
If you would like to talk about any of the quiet EXAIR Intelligent Compressed Air® products or our line of Optimization Products, feel free to contact me or any EXAIR Application Engineer.
Russ Bowman, CCASS
Visit us on the Web
Follow me on Twitter
Like us on Facebook