Super Air Wipe Controls Coating Thickness On Tubing

A large manufacturing company called looking for a better solution to control the thickness of a curing agent being applied to the outside of tubing used in the automotive industry. The tubing is formed in an extruder and travels through a liquid cooling chamber and then air dried. After the tubing is dried, it is sent to a spray chamber where the curing agent is applied to the exterior. On the exit side of the spray chamber, the customer had installed several flexible air lines placed around the perimeter of the tubing to blow air across the surface to help control the coating thickness. This worked somewhat but they were seeing an increase in the amount of rejected material as the air pattern was sporadic and uneven, which caused streaking and dry spots in certain areas of the tubing. They reviewed our web site and familiarized themselves with our Air Wipes but were unsure of the best design and size to fit their need so they reached out for assistance.

After further discussing the process, their tube O.D. sizes range from 3/8″ – 1/2″, making our 1″ Air Wipe the ideal solution. As far as the design, the Standard or Super Air Wipe, I recommended they use our Model # 2451 Super Air Wipe kit due to the aluminum construction and stainless steel wired braided hoses being able to withstand the potential temperature in the area of 200°F. The kit includes a filter separator to remove any water or contaminants in the supply and a pressure regulator which would allow them to control the flow and force of the exiting air, to help “dial” it in to fit the demand of the application.

Super Air Wipe is available in sizes from 1/2″ up to 11″ in Aluminum construction and up to 4″ in Stainless Steel construction.

 

EXAIR Air Wipes features a split design, which can easily be clamped around the material, to provide a 360° uniform airflow, perfect for treating the surface of round shapes, like extruded tubing. If you have an application where you are needing to dry, cool or clean the outside of a pipe, hose or cable, contact an application engineer for help making the best product selection.

Justin Nicholl
Application Engineer
justinnicholl@exair.com
@EXAIR_JN

%d bloggers like this: