Application Database: Compressed Air Use in the Automotive Industry

EXAIR uses many different methods to connect with our customers.  We have our website, social media, blogs, publications etc. We like to share solutions for some of the most common pneumatic problems in the industry.  EXAIR generated a large collection of application information where EXAIR products have already solved problems and improved processes.  We organized them by Application and by Industry.  In this blog, I will show you how to use our Application database; specifically, for the Automotive Industry.

Compressed Air Systems are considered to be a fourth utility within industries because they use a large amount of energy.  Whether an air compressor that uses fuel for portable units or that uses electricity, it is important to use this system as efficiently as possible.  This would also apply to the Automotive industry.  EXAIR has a library of different processes in which we already improved these areas safely and efficiently.  If you are part of the Automotive industry, it could benefit you to take a peek at the areas that we already improved, established OSHA safety, and saved money.

Here is how you can find this library.  First, you will have to sign into EXAIR.  Click here: Log In.  Once you fill in the proper information, you can then retrieve a great amount of resources about EXAIR products that we manufacture.   The Application database is under the Knowledge Base tab.  (Reference photo below).

At the Application Search Library, we have over one thousand applications that we reference.  In the left selection pane, we organized then in alphabetical order under two categories, Application and Industry.

Scroll down in the selection pane until you come to the sub-category: Industry.  Under this Sub-category, you will find three selections that are related to this blog: Automation, Automobile Recycling, and Automotive.  We have other applications as well that may relate to your specific processes if you scroll up and down the list like; Part Ejection and Machining.  You will find many product applications that have already improved processes and solved problems.

Why is this important?  If you are a plant manager or owner, the value of the Application Database can improve your current processes with pre-qualified results.  Within the Automotive industry, simple solutions can be found to address those “nagging” issues that you see every day.  For crisis situations and shutdowns, EXAIR categorized these applications in a way to reference quickly and easily.  And since EXAIR has a high volume of stocked items, we can get the parts to you very fast so you can quickly be on your way to a solution.

In today’s market, companies are always looking for ways to cut cost, increase productivity, and improve safety.  EXAIR can offer engineered products to do exactly that.  With the “been there and done that” solutions already described in the Application Database; you can have confidence in finding a way in solving pneumatic issues.  If you do not sign up at www.EXAIR.com and take advantage of these offerings, you will be missing out on a great tool to optimize your compressed air system.

John Ball
Application Engineer
Email: johnball@exair.com
Twitter: @EXAIR_jb

 

Tiny Engineered Nozzle Saves 91 SCFM for Engine Block Blow-Off

Drilled pipe
Air Box with homemade nozzles

Above, you see a photo of what our customer calls an “air box”. It is aptly named as it consists of approximately 65 homemade nozzles, connected to a large plenum, which are able to be aimed in a variety of directions to blow out the numerous holes that are machined into the bottom of an aluminum engine block.

The engine (1024x621)
Engine Block with multiple holes to be blown out

Each of the nozzles above were hand-made for the air box fixture with an internal hole diameter of 1.6 mm. and which produced a force of about 50 grams with 6 BARG inlet pressure. The goal of reviewing the application was to see what if any EXAIR nozzles could replace these custom-made units to produce an air savings and thus cost savings for operating their fixture.

1108ss_profile
Model 1108SS Super Air Nozzle

After determining that the existing nozzles consumed 4.1 SCFM @ 6 BARG inlet pressure, I was able to make a comparison to the Super Air Nozzles that make up the smaller end of our flow range. In comparing these nozzles, I was able to determine that the Atto Super Air Nozzle, model 1108SS consumes 2.69 SCFM @ 6 BARG and produces 61 grams of force per nozzle.

The calculated air savings between the existing nozzle and the EXAIR Super Air Nozzle was about 34%. That’s a savings of 1.4 SCFM per nozzle. In terms of sheer air volume, that’s not a lot, BUT when you multiply that up over 65 nozzles, total air savings is 91 SCFM. That is close to saving the full output of a 25 HP air compressor!

And so, if you run out the cost to operate a 25 HP air compressor for a year’s worth of production, the savings becomes quite clear that by simply swapping out these homemade nozzles for an engineered solution with EXAIR Super Air Nozzles, the customer can achieve their goal for reduction in air use. Not to mention a significant reduction in the noise level for the application as well as enhanced safety with OSHA compliant nozzles.

Do you have a blowing application that could benefit from the same kind of simple, swapping of nozzles to bring your production costs down? Give us a call and let us know about your application. We would be happy to discuss with you and provide a similar comparison to determine how much air you could save!

Neal Raker, International Sales Manager
nealraker@exair.com
@EXAIR_NR