Super Air Wipe Provides Long-Lasting Solution for Extrusion Blowoff Application

 

The Super Air Wipe has no moving parts to wear out requiring little to no maintenance when supplied with clean, dry compressed air. I recently spoke with a maintenance manager who worked for a company that had been using the same unit for over 7 years. In this application, the Super Air Wipe was used to remove a light coating of oil from the exterior of extruded shapes. Despite showing some obvious signs of wear and tear (and perhaps a little bit of residual oil from the environment), it was still serving the needs of the application as-is.

It may be dirty, but it is still working to remove a light coating of oil from an extrusion!

The Super Air Wipe is available in aluminum construction in sizes ranging from 3/8” – 11” in diameters. All Super Air Wipes comes with stainless steel hardware and stainless steel shims. Sizes up to 4” include a brass tee that supplies one half of the Super Air Wipe while a stainless steel wire braided hose supplies the other side. Sizes over 4” should be piped directly to each ¼ NPT compressed air inlet. In addition to aluminum construction, the Super Air Wipe is also available in 303 stainless steel for corrosive or high temperature applications. The Stainless Steel Super Air Wipe can withstand temperatures up to 800°F and is available in sizes from ½”-4” from stock.

Much like the Super Air Knife, the Super Air Wipe has ¼-20 tapped holes along the downstream side that can be used for mounting. Smaller Super Air Wipes can be supported by rigid compressed air pipe that is used to supply the air into the product. The Super Air Wipe is also infinitely adjustable through the use of shim sets or a pressure regulator. Kits will include the Super Air Wipe, shim set to make gross adjustments to the airflow, an auto-drain filter to keep the air clean and dry, and a pressure regulator. By adjusting the input supply pressure to the Super Air Wipe, you regulate both the force and flow that is projected onto the target material. Increasing the input supply pressure will increase both the force and flow from the Super Air Wipe.

If you’re processing any type of hose, wire, or extruded shapes that could benefit from installing a Super Air Wipe give us a call. With all sizes shipping from stock on an order received by 2:00 pm ET we can have one to you as early as tomorrow!

Tyler Daniel
Application Engineer
E-mail: TylerDaniel@exair.com
Twitter: @EXAIR_TD

Sanitary Flange Air Conveyor Doubles Output for Coffee Bean Roaster

coffee-1149983_1920

For me there’s nothing better than a hot, fresh cup of coffee first thing in the morning. Particularly during the colder mornings like we’ve had as of late, but even in the summer sitting out on the porch sipping on a cup while the sun comes up is a great way to start the day. Just typing this first paragraph has me making my way to the break room for a cup!

We’ve talked about the life of a coffee bean and the processes that it must go through from the fields as a bean all the way through the roasting, grinding, and packaging process. At just about every stage in the production of coffee, EXAIR has a way to help. Just like craft breweries that have taken the world by storm, small-batch coffee companies are beginning to see a similar boom in their business as the market shifts away from large corporate entities and supports small or locally owned businesses.

I recently had the pleasure of speaking with one of these “craft” coffee producers. They’ve been in business for a little while, but as of late have really seen an increase in their sales. To increase production, they invested in a second roasting machine at a substantial capital investment. They’re a small company with less than 10 employees from the front-end to the back-end. While initially they thought all that was needed was to buy a second roaster, they quickly found out that they weren’t getting double the output like they had thought. The problem was that the time spent moving the bulk bags of raw beans into the hopper of the roaster was too time consuming for one person to feasibly handle. They either needed to hire a second person (another substantial investment), or they needed to find a better way of transporting the beans.

After searching online, they came across the EXAIR Line Vac. EXAIR’s Line Vacs are the ideal low-cost solution for bulk material transfer. Available with smooth, NPT threads, and sanitary flange connections, it allows you to convert ordinary pipe or hose into a powerful conveying system for parts, scrap, trim, and other bulk materials. Available in a variety of different sizes and materials, we can achieve wide range of conveyance rates.

SFLV_800sq

In this particular application, food grade materials were necessary. EXAIR’s model 161200-316 2” Sanitary Flange Line Vac allowed them to maintain a clean environment while keeping it easy to remove and clean when necessary. With the Line Vac in place, they were able to double their output as they’d desired when purchasing the new machine without having to hire another operator. A much easier, cheaper, and cost-effective solution. That Line Vac isn’t going to ask for a raise, request time off for summer vacation, or wander into the break-room to make itself a cup of coffee 😊.

If you have an application where you’re manually transferring bulk materials, give us a call. An Application Engineer will be happy to help evaluate your process and recommend a solution that’ll save you time, energy, and money!

Tyler Daniel
Application Engineer
E-mail: TylerDaniel@EXAIR.com
Twitter: @EXAIR_TD

Tiny Engineered Nozzle Saves 91 SCFM for Engine Block Blow-Off

Drilled pipe
Air Box with homemade nozzles

Above, you see a photo of what our customer calls an “air box”. It is aptly named as it consists of approximately 65 homemade nozzles, connected to a large plenum, which are able to be aimed in a variety of directions to blow out the numerous holes that are machined into the bottom of an aluminum engine block.

The engine (1024x621)
Engine Block with multiple holes to be blown out

Each of the nozzles above were hand-made for the air box fixture with an internal hole diameter of 1.6 mm. and which produced a force of about 50 grams with 6 BARG inlet pressure. The goal of reviewing the application was to see what if any EXAIR nozzles could replace these custom-made units to produce an air savings and thus cost savings for operating their fixture.

1108ss_profile
Model 1108SS Super Air Nozzle

After determining that the existing nozzles consumed 4.1 SCFM @ 6 BARG inlet pressure, I was able to make a comparison to the Super Air Nozzles that make up the smaller end of our flow range. In comparing these nozzles, I was able to determine that the Atto Super Air Nozzle, model 1108SS consumes 2.69 SCFM @ 6 BARG and produces 61 grams of force per nozzle.

The calculated air savings between the existing nozzle and the EXAIR Super Air Nozzle was about 34%. That’s a savings of 1.4 SCFM per nozzle. In terms of sheer air volume, that’s not a lot, BUT when you multiply that up over 65 nozzles, total air savings is 91 SCFM. That is close to saving the full output of a 25 HP air compressor!

And so, if you run out the cost to operate a 25 HP air compressor for a year’s worth of production, the savings becomes quite clear that by simply swapping out these homemade nozzles for an engineered solution with EXAIR Super Air Nozzles, the customer can achieve their goal for reduction in air use. Not to mention a significant reduction in the noise level for the application as well as enhanced safety with OSHA compliant nozzles.

Do you have a blowing application that could benefit from the same kind of simple, swapping of nozzles to bring your production costs down? Give us a call and let us know about your application. We would be happy to discuss with you and provide a similar comparison to determine how much air you could save!

Neal Raker, International Sales Manager
nealraker@exair.com
@EXAIR_NR