Tag: compre

Since all compressed air systems will have some amount of leakage, it is a good idea to set up a Leak Prevention Program.  Keeping the leakage losses to a minimum will save on compressed air generation costs,and reduce compressor operation time which can extend its life and lower maintenance costs.

There are generally two types of leak prevention programs:

• Leak Tag type programs
• Seek-and-Repair type programs

Of the two types, the easiest would be the Seek-and-Repair method.  It involves finding leaks and then repairing them immediately. For the Leak Tag method, a leak is identified, tagged, and then logged for repair at the next opportune time.  Instead of a log system, the tag may be a two part tag.  The leak is tagged and one part of the tag stays with the leak, and the other is removed and brought to the maintenance department. This part of the tag has space for information such as the location, size, and description of the leak.

The best approach will depend on factors such as company size and resources, type of business, and the culture and best practices already in place. It is common to utilize both types where each is most appropriate.

A successful Leak Prevention Program consists of several important components:

• Baseline compressed air usage – knowing the initial compressed air usage will allow for comparison after the program has been followed for measured improvement.
• Establishment of initial leak loss – See this blog for more details.
• Determine the cost of air leaks – One of the most important components of the program. The cost of leaks can be used to track the savings as well as promote the importance of the program. Also a tool to obtain the needed resources to perform the program.
• Identify the leaks – Leaks can be found using many methods.  Most common is the use of an Ultrasonic Leak Detector, like the EXAIR Model 9061.  See this blog for more details. An inexpensive handheld meter will locate a leak and indicate the size of the leak.

  

• Document the leaks – Note the location and type, its size, and estimated cost. Leak tags can be used, but a master leak list is best.  Under Seek-and-Repair type, leaks should still be noted in order to track the number and effectiveness of the program.
• Prioritize and plan the repairs – Typically fix the biggest leaks first, unless operations prevent access to these leaks until a suitable time.
• Document the repairs – By putting a cost with each leak and keeping track of the total savings, it is possible to provide proof of the program effectiveness and garner additional support for keeping the program going. Also, it is possible to find trends and recurring problems that will need a more permanent solution.
• Compare and publish results – Comparing the original baseline to the current system results will provide a measure of the effectiveness of the program and the calculate a cost savings. The results are to be shared with management to validate the program and ensure the program will continue.
• Repeat As Needed – If the results are not satisfactory, perform the process again. Also, new leaks can develop, so a periodic review should be performed to achieve and maintain maximum system efficiency.

In summary – an effective compressed air system leak prevention and repair program is critical in sustaining the efficiency, reliability, and cost effectiveness of an compressed air system.

If you have questions about a Leak Prevention Program or any of the 16 different EXAIR Intelligent Compressed Air® Product lines, feel free to contact EXAIR and myself or any of our Application Engineers can help you determine the best solution.

Brian Bergmann
Application Engineer
Send me an email
Find us on the Web 
Like us on Facebook
Twitter: @EXAIR_BB