Nozzles for Cleaning Inside Hose, Tube, Pipe and More

Some applications such as blowing chips or debris out of a pipe or blind hole, it may not be possible to blow forward. The pipe may be too long, making it impossible to push the debris all the way down the pipe or the other end of the pipe may not be open. In either of these scenarios, the Back Blow Nozzle is the right tool for the job. An array of holes around the diameter of the Back Blow Nozzles provides a powerful 360° airflow pattern that will clear out any leftover coolant or chips from the machining process.

EXAIR has three different size Back Blow Nozzles; the 1004SS (M4 x .5), the 1006SS (1/4 NPT), and the 1008SS (1” NPT). The 1004SS is recommended for use on pipes as small as ¼” and up to 1”. The 1006SS can be used for a wide range of pipe sizes, from 7/8” up to 4”. The 1008SS nozzle offers the greatest overall force for stubborn or sticky materials stuck to the inside diameter of the pipe. This nozzle is suitable for use in pipes ranging from 2”-16”. As the Back Blow Nozzle will be blowing chips and debris back out of the pipe towards the operator, it is always recommended that a Chip Shield is used. The strong polycarbonate Chip Shield will keep them safe from flying debris and keep you in compliance with OSHA directive 1910.242(b).

Various Views of the Model 1006SS Back Blow Nozzle

All of EXAIR’s Back Blow Nozzles are available with extensions. For the 1004SS we have extensions from 6”-36”, and from 12”-72” for the 1006SS and 1008SS. The Back Blow Nozzle can also be installed on our VariBlast, Soft Grip, Heavy Duty, and Super Blast Safety Air Guns. With such a wide range of available sizes and configurations, we can tackle just about any internal pipe cleaning application. If you have a process in your facility that may benefit from the use of one of these nozzles, give us a call and get one on order today!

Jordan Shouse
Application Engineer

Send me an email
Find us on the Web 
Like us on Facebook
Twitter: @EXAIR_JS

Back Blow Air Nozzles Clean Inside Diameters

They say time flies when you’re having fun. Maybe that’s why I found it a little hard to believe it’s been almost two years since we introduced the Back Blow Air Nozzles. They’ve become yet another “textbook” solution to a great many applications:

*Model 1004SS M4 Back Blow Air Nozzles are used to dry the inside of a closed cylinder after a zinc bonding process.  They’re also fitted to Model 1204SS-12-CS M4 Back Blow Safety Air Gun to remove chips & cutting fluid from freshly cut pipe ends.

*Our Model 1006SS 1/4 NPT Back Blow Air Nozzle won Plant Engineering Magazine’s “Product Of The Year” Bronze Award in 2015, and are successfully employed in a wide range of uses:

  • Blowing out splined bores by a gear manufacturer
  • Quickly cleaning out spindles between tool changes by a CNC machinery operator
  • Removing the last bits of powder from spent toner cartridges by a printing equipment recycler

*The Model 1008SS 1 NPT Back Blow Air Nozzle is becoming famous in hydraulic cylinder repair shops…after a cylinder bore is honed, one quick pass of the powerful blast it produces cleans bores from 2″ to 16″.  We can even put it on the Model 1219SS Super Blast Back Blow Safety Air Gun, with a 1ft, 3ft, or 6ft extension.

EXAIR Back Blow Air Nozzles come in three sizes, for bores from 1/4″ to 16″ in diameter!

If you want to see how they work, check out this video:

I could have sworn Lee Evans just made that video, but apparently, it’s over a year old now.  Time does indeed fly, and I promise we’re having fun!  If you’d like to find out more about how a Back Blow Air Nozzle – or any of our engineered compressed air products (old or new) – can make your operations quieter, more efficient (and hence, probably, more fun,) give me a call.

Russ Bowman
Application Engineer
Find us on the Web
Follow me on Twitter
Like us on Facebook