EXAIR has provided the benefits of vortex tube technology to the industrial world since 1983. Prior to that, French scientist George Ranque wrote about his discovery in 1928 calling it the tube tourbillion. But it wasn’t until German physicist Rudolf Hilsch’s research paper in 1945 on the wirbelrorhr or whirling tube, that the vortex tube entered the minds of commercial engineers. Nearly 60 years later, EXAIR is a leading provider for cooling products utilizing vortex tube technology.
EXAIR Vortex Tubes produce a cold air stream down to -50° F and are a low cost, reliable, maintenance-free (there are no moving parts!) solution to a variety of spot cooling applications. These applications span a wide variety of industries and include cooling of electronic controls, soldered parts, machining operations, heat seals, environmental chambers, and gas samples. We’re always finding compelling new cooling opportunities for the vortex tubes.
So how does it produce the cooling stream? Compressed air is plumbed into the side port of the Vortex Tube where it is ejected tangentially into the internal chamber where the generator is located. The air begins flowing around the generator and spinning up to 1 million RPM toward the hot end (right side in the animation above) of the tube, where some hot air escapes through a control valve. Still spinning, the remaining air is forced back through the middle of the outer vortex. Through a process of conservation of angular momentum, the inner stream loses some kinetic energy in the form of HEAT to the outer stream and exits the vortex tube as COLD air on the other side.
The adjustable control valve adjusts what’s known as the cold fraction. Opening the valve reduces the cold air temperature and also the cold airflow volume. One can achieve the maximum refrigeration (an optimum combination of temperature and volume of flow) around an 80% cold fraction. EXAIR publishes performance charts in our catalog and online to help you dial into the right setting for your application, and you can always contact a real, live, Application Engineer to walk you through it.
EXAIR manufactures its vortex tubes of stainless steel for resistance to corrosion and oxidation. They come in small, medium and large sizes that consume from 2 to 150 SCFM and offer from 135 to 10,200 BTU/hr cooling capacity. Each size can generate several different flow rates, dictated by a small but key part called the generator. That generator can be changed out to increase or decrease the flow rate.
While operation and setup of an EXAIR Vortex Tube are easy, its performance will begin to decrease with back pressure on the cold or hot air exhaust of over 3 PSIG. This is a key when delivering the cold or hot airflow through tubes or pipes. They must be sized to minimize or eliminate back pressure.
The Vortex Tube is integrated into a variety of EXAIR products for specific applications, like the Adjustable Spot Cooler, the Mini Cooler, the Cold Gun Aircoolant System and our family of Cabinet Cooler Systems.
If you would like to discuss your next cooling application, please contact an Application Engineer directly and let our team lead you to the most efficient solution on the market.