How To Hold Up Just About Anything

My youngest asked me if we had any duct tape the other night. I got a swell of pride from the confirmation that I had indeed been successful in teaching him at least half of the basics of mechanical repair:

WD40 Duct Tape Flow Chart

However, he’s eleven, and I distinctly remember being an eleven year old boy, so I (prudently) asked what he wanted it for. He said he wanted to hang some posters in his room. Two things popped into my head:

1. I (or, even worse, his mother) would eventually be responsible for removing the duct tape, and
b. I know what duct tape can do when you try to remove it from drywall (again, from my experience as a former eleven year old boy),

I suggested that we use a more appropriate method, like Scotch tape. He was OK with that.

At EXAIR, we get questions from customers all the time about how to properly install/mount/support our products. Some are fairly straight-forward:

*Super Air Amplifiers (up to 4”) have an integral 2-bolt flange for secure mounting.

*Line Vacs (except Light Duty) are available with a rigid mounting bracket…these come with the Kit, or can be purchased separately.

*Cold Guns, Adjustable Spot Coolers, and Mini Coolers are supplied with magnetic bases for quick and easy mounting & positioning.

*We have a brand-new mounting bracket for our Atomizing Spray Nozzles…they have no fasteners; the Spray Nozzle simply “snaps” in, and out, as needed.

*The Ion Air Cannon comes with a sturdy stand for easy wall, bench, or machine mounting.

*Modular E-Vacs are block design, and have a series of mounting holes for convenient mounting.

*Even our Soft Grip Safety Air Guns have a built-in hook, for easy storage when not in use.

Many other products, like our Super Air Nozzles, Small/Medium Vortex Tubes, and our Adjustable Air Amplifiers (to name a few) are lightweight and compact enough to be secure when installed on properly supported compressed air piping. For added convenience, though, we offer value-added accessories such as Stay Set Hoses, Magnetic Bases, and Swivel Fittings as well.

Perhaps the most versatile product, as far as mounting is concerned, is the Super Air Knife. The 3” unit can actually be secured in place by properly supported piping, like the above mentioned lighter weight products. All Super Air Knives have ¼”-20 tapped holes, on 2” centers, along the entire length – these provide an easy way to mount to any nearby sturdy structure. If you’re mounting one over a conveyor belt, you can even support them by plumbing the compressed air with hard pipe to both ends. For quick, convenient, and easily re-positionable mounting, our Universal Air Knife Mounting Systems are just the thing.

These are just a few of the installation options available for some of our products. If you have questions or concerns about how to mount an EXAIR Intelligent Compressed Air Product, give us a call…we’re eager to help!

Russ Bowman
Application Engineer
EXAIR Corporation
(513)671-3322 local
(800)923-9247 toll free
(513)671-3363 fax
Web: http://www.exair.com
Blog: https://blog.exair.com/
Twitter: twitter.com/exair_rb
Facebook: http://www.facebook.com/exair