What’s So Great About EXAIR Air Jets?

Published on by Russ Bowman

For over 40 years now, EXAIR has been making engineered Air Nozzles and Air Jets for a wide range of industrial and commercial applications. Basically, if you need to blow air onto, into, towards, or through something, we’ve got something for that.

Our Super Air Nozzles seem to “get all the press” (based on an unscientific survey of the EXAIR Blog), and maybe they should, with their ease of installation onto the end of a pipe or tube that someone who’s never thought about the cost of compressed air has been using as a cheap to make but expensive to operate blowoff.

Compression fittings and Model 1100 Super Air Nozzles transformed the part ejection from “loud and wasteful” to “quiet and efficient.”

Like our engineered Super Air Nozzles, our Air Jet products use the Coanda effect to entrain enormous amounts of free air from the surrounding environment. While the Super Air Nozzles do this via an array of small holes recessed between a series of fins, the Air Jet uses an internal annular ring nozzle to draw the free air through its throat. There are a number of applications where either a Super Air Nozzle or an Air Jet can be used efficiently, safely, and quietly. Some jobs, however, benefit from the specific design of one or the other. Since this is an Air Jets blog, I’m going to focus on them:

  • Powerful, directed air stream. This makes EXAIR Air Jets ideal for part ejection, chip removal, and part drying.
Model 6013 Brass High Velocity Air Jet (left) blows rinse water off beverage cans on a high speed conveyor. An array of Model 6013SS SS High Velocity Air Jets (right) dries a finned component after washing.
  • Reliable and efficient blowoff. With no moving parts, as long as you supply them with clean compressed air, they’ll operate darn near indefinitely, maintenance free. And they’ll use a LOT less of that compressed air than similarly sized open-ended blowoff devices too, thanks to engineering:
Compressed air enters through the 1/8 MNPT fitting and discharges into the throat via an annular ring gap, where the Coanda profile of the plug directs the air towards the jet outlet (1). This primary, high velocity flow pulls in air from the entrainment plenum (2), creating a total developed flow up to 25 times the compressed air flow (3).
  • Safe to use. EXAIR Air Jets, like the rest of our Intelligent Compressed Air Products, are compliant with OSHA Standard 1910.242(b) which limits the downstream pressure at the nozzle or opening of a compressed air device used for cleaning purposes to 30psi. If you cover the entire outlet opening, the air simply flows out the entrainment plenum.
  • Remote positioning. Since both the inlet and outlet can be ducted, you can fit a 1″ ID hose over the entrainment plenum and run the other end to the location where you want to draw airflow from. This is beneficial if, for example, you want to position the Air Jet in a contaminated area, but want to eliminate any of that contamination from the Air Jet’s developed airflow. You can also fit a 1/2″ ID hose over the outlet to direct the airflow elsewhere.
  • Adjustability. For the Adjustable Air Jet, it’s right there in the name: the Plug can be threaded into, or out of, the body to reduce, or increase the annular ring nozzle’s gap, and hence, the airflow and force applied. There’s a micrometer gap indicator so you can set – and reset – the performance to different levels, as required. The High Velocity Air Jet’s annular ring nozzle gap is fixed with a shim (they come with a 0.015″ thick shim installed) but Shim Sets, containing one each of a 0.006″ and 0.009″ thick shim, can be used to make gross adjustments to the airflow and force applied. You can regulate the air supply pressure to either the Adjustable or High Velocity Air Jets to very precisely “dial in” the performance.
A 0.006″ or 0.009″ thick shim from the 6313 Air Jet Shim Set (top left) can be installed in a High Velocity Air Jet (bottom left) to put the Air Jet in a whole new performance band. You can do this to an Adjustable Air Jet (right) by turning the knurled ring on the plug to set (and reset) the air gap and hence the performance.
  • Materials of construction. Both the Adjustable and High Velocity Air Jets come in brass for general purpose applications, or 303SS for use in areas with high heat or corrosive elements in the environment.
The brass Air Jets (top) are rated for installation in areas with ambient temperatures up to 275°F, while the 303SS models (bottom) are good to 400°F.

If you’d like to find out more about EXAIR Air Jets, or how any of our Intelligent Compressed Air Products can help you get the most out of your compressed air system, give me a call.

Russ Bowman, CCASS

Application Engineer
Visit us on the Web
Follow me on Twitter
Like us on Facebook

Leave a Reply