This Is A Hold Up

To clarify, right off the bat:

  1. Nobody is getting robbed here.
  2. Nothing is being delayed, especially a shipment from EXAIR. If it’s in the catalog, it ships on time, 99.97% of the time, for 17 years & running. This has nothing to do with this blog; I just never get tired of bragging about that.

Today I wanted to write about installing EXAIR products, but hey, it’s Friday, so I thought I’d start with something that would get your attention. If you’re still reading, I guess it worked.

We talk to users…and potential users…all the time about how to install an Air Knife, Air Nozzle, Vortex Tube, etc. And the answer is…it depends. But, it’s almost always quick and easy.

Consider the EXAIR Super Air Knife. There are a few ways to hold one in place:
*There are 1/4″-20 tapped holes, every 2″ along the bottom. These can be used to bolt it to just about anything you want to bolt it to.
*The 1/4″-20 cap screws can also be replaced with fasteners of sufficient length to allow use of a bracket. In fact, this is what we use for…
*The Universal Air Knife Mounting System – it’s a quick and convenient way to support an Air Knife. It’s especially beneficial to precisely position the Super Air Knife for optimum performance.
*Last but not least, Super Air Knives 24″ and longer need to be plumbed to both ends for proper performance. If you hard pipe it in, it’ll be as well supported as the piping.

EXAIR Super Air Knives are easy to install, no matter what the length, or application.

EXAIR Super Air Knives are easy to install, no matter what the length, or application.

Then there’s our Super Air Nozzles:
*With standard, common NPT threads, these are easy to install anywhere you have an existing air line. You can get NPT adapters for darn near any threaded connection, off the shelf, from a friendly local air compressor or hydraulic/pneumatics shop.
*We’ve got Stay Set Hoses in lengths from 6″ to 36″ – these let you reposition the Air Nozzle at will. It’ll “stay set” until you bend it again.
*Our Swivel Fittings can be used with any of our Super Air Nozzles, as well as our Air Amplifiers, for sturdy, yet easily repositionable, installation.

EXAIR Swivel Fittings or Stay Set Hoses - no better way to optimize your air flow than aiming it where it needs to be!

EXAIR Swivel Fittings or Stay Set Hoses – no better way to optimize your air flow than aiming it where it needs to be!

We’re even committed to making our air preparation accessories easy to install…our Automatic Drain Filter Separators, Oil Removal Filters, and Pressure Regulators (up to 1/2 NPT) can be coupled via a modular block assembly that eliminates a threaded connection between them, and is ideal for close quarters.

EXAIR Model 9027 Oil Removal Filter, installed between Model 9004 Filter Separator and 9008 Pressure Regulator, using our Modular Coupling Kits

EXAIR Model 9027 Oil Removal Filter, installed between Model 9004 Filter Separator and 9008 Pressure Regulator, using our Modular Coupling Kits

That’s not even mentioning the products that are ready to install, right out of the box with a convenient Magnetic Base:

From left to right: EXAIR Mini Coolers, Cold Guns, and Adjustable Spot Coolers come with Magnetic Bases for instant installation.

From left to right: EXAIR Mini Coolers, Cold Guns, and Adjustable Spot Coolers come with Magnetic Bases for instant installation.

If you’d like to find out more about how easy it is to install an EXAIR Compressed Air Product, give me a call.

Russ Bowman
Application Engineer
Find us on the Web
Follow me on Twitter
Like us on Facebook

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: