Tag: duct air booster

Finding the Right Intelligent Compressed Air Product

Published on by Russ BowmanLeave a comment

I had the pleasure of talking with a customer who had purchased a Model 6063 1-1/2″ Stainless Steel Line Vac the other day. They were building chemical processing machinery, and needed to move vapor into a condenser for reclamation of the fluid. The Line Vac was doing exactly what they needed it to do, and with a supply pressure regulated down to 12psig, at that. Their question was, how do they quantify the flow rate?

Because the Line Vac generates a moderate level of vacuum head with a moderate vacuum flow, they’re ideal for drawing in bulk solid material and conveying it from one place to another. They’ll do the same with airborne dust, vapors, and gases, but…

Because they’re made for conveying bulk solids, our published performance data for the Line Vacs doesn’t address total developed airflow. However, because our Air Amplifiers are made for moving air (and anything that might be suspended in the air or already airborne), we DO publish airflow performance data for them. And it provides a GREAT segue for situations like this, when the only thing that can do a better job than one EXAIR product is another EXAIR product!

…Air Amplifiers, while similar in function to the Line Vacs, generate a high vacuum flow with a low vacuum head. This makes them the better choice for moving air & airborne dust, vapors, gases, etc.

In this case, the machine designer replaced the 1-1/2″ Stainless Steel Line Vac with a Model 6040 3/4″ Stainless Steel Adjustable Air Amplifier. It’s got a 1-1/2″ OD inlet plenum, so it was a ‘drop-in’ replacement for the 1-1/2″ Line Vac, which was plumbed in with a 1-1/2″ ID hose. When they regulated the supply pressure to 25psig, they were able to replicate the vapor carryover to the condenser at the specified rate, and even cut the already low compressed air consumption from 9.3 SCFM @12psig (for the Line Vac) to 3.7 SCFM @25psig (for the Air Amplifier).

As an EXAIR Application Engineer and a Certified Compressed Air Systems Specialist, I’m here to make sure you get the most out of your compressed air system. If that involves using a product other than the EXAIR Intelligent Compressed Air Product that you may have initially selected, I’m not going to be shy about telling you that. But, there’s a good chance that the more ideal solution is going to be another EXAIR Intelligent Compressed Air Product. If you want to talk about compressed air…so do I! Give me a call.

Russ Bowman, CCASS

Application Engineer
Visit us on the Web
Follow me on Twitter
Like us on Facebook

Infinitely Adjustable Force and Flow w/ EXAIR’s Adjustable Air Amplifiers

Published on by Tyler DanielLeave a comment

When working with a cooling application, many customers will immediately look to the Vortex Tube and Spot Cooling product lines. While this may be the best solution for some applications, cold air is not always the best method that we have available for cooling. EXAIR’s Air Amplifiers are very effective at reducing the temperature of a part without requiring cold air. Due to their ability to draw in large volumes of ambient air, we can move a lot of air across the surface of the part and quickly lower the temperature. The key to success, is remembering that the word “cooling” is relative. So long as we have a reasonable Delta between ambient temperature and the starting temperature, cooling can occur.

I like to compare this to blowing on a hot cup of coffee just as it’s been brewed. The temperature of the air coming from your mouth is around 98.6°F, the same as your body temperature. Coffee can be as hot as 185°F when fresh. Due to the temperature differential between your breath and the hot coffee, we’re able to achieve a reasonable amount of cooling just by simply blowing across the surface. Typically, when the target temperature of the part or material needs to be around ambient temperature or higher, the best solution for cooling is going to be an Air Amplifier (or sometimes an Air Knife!).

EXAIR’s Adjustable Air Amplifiers are available in both Stainless Steel and Aluminum from sizes ranging from ¾”-4” on the air outlet. The outlet can be ducted , or it can be used as-is. The air gap of the Adjustable Air Amplifier is infinitely adjustable, allowing you to regulate both the air consumption and outlet flow from a “breeze” to a “blast”. In addition to the standard Adjustable Air Amplifiers, we also have a High Temperature Air Amplifier available that is capable of withstanding temperatures as high as 700°F.

Air Amplifiers can be used in a variety of different applications. Not only can they be used in applications requiring cooling, but the air entrainment properties of the amplifier can be used to exhaust smoke as discussed in this application at a foundry. An Adjustable Amplifier can also be used for drying or cleaning parts as well as for conveying light materials.

If you’re using fans for process cooling, speed things up with an EXAIR Air Amplifier. They’re on the shelf, in-stock, and ready to ship today with an order received by 2:00 ET.

Tyler Daniel, CCASS

Application Engineer

E-mail: TylerDaniel@EXAIR.com

X: @EXAIR_TD

What Do Air Amplifiers Amplify, and Why Is It Important?

Published on by Russ BowmanLeave a comment

The word “amplifier” can mean some very different things, depending on the context in which it’s used. A musician may plug an instrument into an amplifier to increase the sound power being put out by said instrument. Folks who work with electronic or electrical systems use devices to amplify voltage (at the cost of current) or current (at the cost of voltage.)

In pneumatics and fluid power, there are even two very different devices called an ‘air amplifier.’ One is made to amplify the downstream pressure by using air flow and are commonly known as pressure boosters (we don’t have those), and the other amplifies the flow, proportionally to the supply pressure (THOSE are ours).

EXAIR Air Amplifiers use a small amount of compressed air to create a tremendous amount of air flow.

So that, dear reader, handles the question of what they amplify – now let’s cover why it’s important:

  • Lower cost of operation: Like the picture above says, Air Amplifiers use a small amount of compressed air, but make a tremendous amount of total developed air flow. This is a feature of our entire line of air blowing products – they’re ALL designed to consume as little compressed air as possible, and develop as much flow as possible. The less you use, the less it costs to operate…use the calculator on our website if you want to find out how much you can save.
  • Sound reduction: The discharge of compressed air into the open creates a LOT of noise, but the air entrained by our Air Amplifiers (and Air Knives & Air Nozzles) creates a low velocity boundary layer around the primary high velocity, laminar air flow. This boundary layer serves as an insulating shield, of sorts, and it results in dramatically quieter operation.
  • High ventilation rate: Because they entrain so much air from the surrounding environment, they can be used for rapid removal of fumes, smoke, airborne dust, etc. from spaces. And they’re going to do it quicker than standard Venturi or ejector devices.
Model 120024 4″ Super Air Amplifiers are commonly used to exhaust welding smoke and fumes.

That’s it for the “what they do” and “why it’s important” – if you’d like to find out how valuable an Air Amplifier can be, give me a call.

Russ Bowman, CCASS

Application Engineer
Visit us on the Web
Follow me on Twitter
Like us on Facebook

So, You Want To Calculate Line Vac Flow… Or Do You?

Published on by Russ BowmanLeave a comment

As an EXAIR Application Engineer (and one with almost 14 years under my belt, to boot), I’m well versed in all the standard calculations regarding compressed air, including: converting ACFM or ICFM to SCFM, determining compressed air consumption rates at different inlet pressures, return on investment from using more efficient products, receiver tank sizing, and cost of compressed air generation. I know many formulas, by heart, that relate to certain applications involving our products, like how to calculate the heat load for Cabinet Cooler Systems, the amount of air flow from a Super Air Nozzle, Super Air Knife, Air Amplifier, etc., to cool an object from a starting to a desired temperature (and how long it’ll take to do it), and humidity formulas for Atomizing Spray Nozzle applications.

I’ve loved math all my life, so all that stuff above is one of my favorite parts of this job. There are, however, things we can’t do the math on…and calculating the flow through a Line Vac is one of them. Maybe two. I say “Maybe two” because there are two common questions we get regarding Line Vacs, and neither have answers that can be calculated:

  • How fast can I move [insert description of bulk material here] with a Line Vac?
  • How much air flow is generated by a Line Vac?

There are a LOT of variables that can affect conveyance rate, so the first question is difficult to put a number on, unless it’s something we’ve tested here before, or if a customer has provided reliable data from their Line Vac conveyor setup. For our latest Catalog, #35, we compiled this into a Conveyance Data table. You can access it here (registration required), request your very own print copy, or just contact me, and I’ll email it to you.

Likewise, the second question doesn’t have a mathematical formula to give us an answer either. When we get questions about a Line Vac’s total developed air flow, we’ll say that, very generally speaking, a Line Vac will entrain 2-3 times its compressed air consumption in vacuum flow. That’s based on some informal testing we’ve done in the shop on a few specific Line Vacs. And that’s ALWAYS followed up with some questions of our own:

  • Are you looking for a specific amount of air flow? And,
  • What is the nature of the application?

Oftentimes, we find out that the customer just needs to move air – as opposed to conveying bulk product – and THAT’S a job for our Air Amplifiers. We DO publish formal performance data on those, and if air movement is all that’s needed, the Air Amplifiers are going to do that WAY more efficiently than a Line Vac. They’re capable of entraining air at rates of up to 25:1.

Air Amplifiers use the Coanda Effect to generate high flow with low consumption.

If you have questions about a potential application, or about a specific product, give me a call. I’m here to make sure you get the most out of our products, and that starts right at the beginning, with finding the best one to suit your needs.

Russ Bowman, CCASS

Application Engineer
Visit us on the Web
Follow me on Twitter
Like us on Facebook