Tag: summer

It’s Getting Hot. A Good Reason For a Cabinet Cooler Bonus

Published on by Brian FarnoLeave a comment

It would appear that the heat is here, as my car has a thermometer which I am pretty sure lied to me on Sunday when it was reading 97°F.  I think perhaps it was, but it is getting hotter all across the country and that means we are fielding the calls on electrical cabinets and equipment breaking down due to heat issues.   This is all happening just in time for our new promo.

ccJUL_ACsensor186x149

That’s right, order any of the Cabinet Cooler® Systems listed and receive a free A/C Sensor Pen.  This pen has saved me from getting shocked many of times around my home.   Of course, every time I can’t find my A/C Sensor I have had faith I turned the correct breaker off and as soon as I touch the outlet to change it out I get hit with 110V.

 

We are here to assist your choice of Cabinet Cooler system and to provide a very fast solution to the downtime you are experiencing. We manufacture Cabinet Cooler systems from 275 Btu/Hr through 5600 Btu/Hr with NEMA 12, 4 and 4X integrity. If you don’t know what Cabinet Cooler System you need, take a look at the form below. It can be found on our site, get the information and call, fax, e-mail or live chat with an Application Engineer to get a quick and accurate response on what amount of cooling your system will need.

Sizing Guide

 

Over our thirty years in business we have also seen many companies who only experience a short span of seasonal heat and have found that 2000 Btu/Hr is enough refrigeration to offset summertime heat load, in most cases. Choosing a model with a thermostat control will turn the cooler on and off as needed and minimize compressed air use. Cabinet Cooler systems are in STOCK and ship same day for domestic and Canadian orders received by 3:00 pm EDT. We can get your cabinet cooled FAST and eliminate your heat related problems. Cabinet Cooler systems are shipped ready to install through a standard electrical knockout. There is no waiting for oil to settle back into the compressor motor, no mounting templates required or huge holes to cut into your cabinet. Cabinet Cooler systems have no moving parts to wear, making them rugged and lasting in your hot environment.

Brian Farno
Application Engineer
BrianFarno@EXAIR.com
@EXAIR_BF

Can We Help Identify Your Existing EXAIR Product? – Yes.

Published on by Lee EvansLeave a comment

From time to time we have customers call in and say “We have one of your products and need another. But we installed it so long ago that we no longer have the paperwork to know which model we bought.” That’s a great thing to hear in a way. Our products have outlasted their filing system, and not only that, but now we have potential to solve another problem for the same customer.

When this happens, we can sift through our files to find out which model was purchased, or if the original purchase was made through a third party, we can determine the model number in other ways. We can use the dimensions, material of construction, description over the phone, or a photo emailed to an Application Engineer such as the one below.

Cabinet Cooler

But, the needs of the application don’t end there. We may be able to pinpoint the model number of the device currently in use, but we also need to confirm that this model will be suitable for the new application. For the end user that sent in the photo above, this meant the completion of a Cabinet Cooler Sizing Guide for new heat load calculation.

What we determine in many cases is that the new application has specific needs which dictate the use of a product with different attributes (in this case a different Btu/Hr rating on a Cabinet Cooler). Whether it is because of heat load, ambient temperature concerns, required material, or any other variable, we are sure to provide the most suitable solution.

As spring gains momentum and warmer months are to come, it may be time to consider an EXAIR Cabinet Cooler solution for an overheating electrical panel in your facility. Contact an EXAIR Application Engineer for help calculating heat load and choosing the right system.

Lee Evans
Application Engineer
LeeEvans@EXAIR.com
@EXAIR_LE

Snow Snow Go Away

Published on by Leave a comment

Enough already! Enough is enough! I am done with Winter!

 

I’m sure that I am expressing the sentiments of  most the nation.   In my sixty some years I cannot remember a winter this severe. I shouldn’t complain though as I have heat and electricity, unlike those who are caught up in the propane shortage.

When you come to think of it, folks in the extreme northern climates deal with this kind of weather as a normal routine. It just proves that we have become so accustomed to a controlled environment, that we have lost our resilience and the ability to cope  outside our comfort zone. I am going to take this as a wake up call and stop complaining and go take the dog for a walk.

With cold gripping the country, you would not think that we would be getting calls for our Cabinet Cooler Systems. Quite the contrary as many control panels are in very warm environments such as foundries, bakeries, etc. Also Summer will be coming soon. It would be best to get a Cabinet Cooler System sized up and ready rather than wait for a heat related shutdown.

CCSizing

Our application engineers are available to help you size up your cooling requirements. We have an online form to outline  the data we will need to size one up properly. One of our engineers will do the calculations for you and get back to you promptly. Remember last summer when that one panel kept tripping out or alarming every time it got too hot…You may be cold now, but don’t let the heat sneak up on you.

Joe Panfalone
Application Engineer
Phone (513) 671-3322
Fax (513) 671-3363
Web: www.exair.com
Twitter: EXAIR_JP

EXAIR Now Has A Softball Team…. Again

Published on by Brian FarnoLeave a comment

It’s that time of the year, to play ball.   EXAIR now has a recreational softball team that is going to be playing on Thursday nights here in Cincinnati.  The team is going to be composed of guys from our production team, engineering department, marketing department, and even our President.

As of right now we are still gathering our equipment up and it seems like it is going to turn out to be a combination of The Sandlot, along with The Bad News Bears. (Not the Billy Bob Thorton version.)  The interesting part of the process so far is that we have already started to pull together and help each other out.  Even people who aren’t going to be playing have volunteered to watch us for comedic relief or donate some old equipment to the cause.

So other than being a group of guys that haven’t played sports in a handful of years we have one thing going for us and that is the support from EXAIR.   It really goes to show you what kind company EXAIR is.  We’ll not only help you find what you need, let you try the unit out for 30 days, then stand behind it for 5 years against manufacturer’s defect.  We will also be here to support troubleshooting and any other help you may need with the product by phone, e-mail, live chat or even fax.

If you have a question on any of our products, don’t hesitate to call.   Also, if you are in Cincinnati and want to watch some live entertainment, let us know and we’ll get you the team schedule.

Brian Farno
Application Engineer
BrianFarno@EXAIR.com
@EXAIR_BF