1″ And 2″ Flat Super Air Nozzles Overview

In most “general” blowoff applications, the conical airflow pattern from a standard round shaped nozzle is ideal when trying to remove dust or light debris from the surface of a part or material. However in certain applications, a focused, laminar flow of air is required to produce the desired result, such as cleaning peanut butter from a fill nozzle or ejecting parts in a stamping operation.

EXAIR manufactures our 1″ Flat and 2″ Flat Super Air Nozzles, which provide a 1″ and 2″ (respectively) wide, forceful stream of high velocity, laminar airflow while consuming only a small amount of compressed air. Both the 1″ and the 2″ are available in Zinc Aluminum alloy, rated up to 250°F (121°C), or 316 Stainless Steel construction, rated up to 1,000°F (538°C)

1″ Flat Super Air Nozzle
2″ Flat Super Air Nozzle

Their unique design incorporates a specially designed, replaceable shim, to maintain a critical gap between the cap and body, resulting in the focused airflow. They are shipped from stock with a .015″ shim installed.

Using the optional shim kit, the shims can be changed out to .005”, .010” or .020”, which allow you to increase or decrease the force and flow by either opening or closing the gap, providing more or less force and flow to meet the demand of the application.

(Here’s a short video showing how easy it is to change out the shims)

We also offer our High Power versions of these nozzles which feature a thicker shim installed (0.025″) for applications requiring higher thrust and velocity.

If you have an application you would like to discuss or to see how the Flat Super Air Nozzles might improve your process, give me a call, I’d be happy to help.

Justin Nicholl
Application Engineer
justinnicholl@exair.com
@EXAIR_JN

 

On the lighter side

Well, it’s almost everyone’s favorite time of the year, swimsuit season!!!. I said ALMOST everyone. Which means that crash diets and “lighter” fare choices are in full swing. (I know I need to be incorporating these myself).

Sticking with this theme, I thought I would write this week’s blog on our Light Duty Line Vac. These units provide an alternative solution for conveying smaller volumes of material over a short distance.

Available in eight common sizes, ¾” up to 6”, in aluminum construction, these units use less compressed air than our other Line Vac products. The Light Duty Line Vac also has no moving parts and requires no electricity to operate, making them virtually maintenance free!

Light Duty Line VacAir consumption is minimal, ranging from our smallest unit consuming 7.30 SCFM @ 80 PSI, up to our largest unit consuming 80.20 SCFM @ 80 PSI.  You can also control the conveying rate by regulating your compressed air supply pressure.

For even more control, you could add one of our Electronic Flow Control (EFC) which uses timing control and a photoelectric sensor to turn off your compressed air when there is no media/part present.

Image

To see our complete line of Air Operated Conveyors, visit our website www.EXAIR.com or if you need assistance with an application, please do not hesitate to contact an application engineer at 1-800-903-9247.

 

Justin Nicholl
Application Engineer
JustinNicholl@EXAIR.com
@EXAIR_JN