The Basics of a Compressed Air Leak Detection Program

It is no surprise that compressed air can be a costly utility for industrial facilities. It can easily chip away at the bottom line finances if used carelessly and without planning. This is one of the leading reasons we have educated continuously on how to ensure this vital utility is used with safety and conservation in mind. If we have installed all engineered solutions at the point of use throughout a facility, there is still more to be saved. One of the easiest things to do with a utility system inside of a facility is to leave it unchecked and undocumented until something goes wrong. This does not have to be the scenario and in fact, starting a leak detection program in a facility can help to save up to 30% of the compressed air generated.

Leaks cost money!

That’s right, up to 30% of the compressed air being generated in an industrial facility can be exhausting out to ambient through leaks that run rampant throughout the facility. When the point of use production is still working fine, then these sorts of leaks go unnoticed. Another common occurrence goes something like this example: Maybe there is a leak bad enough to drop the packaging line pressure slightly, this may get fixed by bumping up a pressure regulator, production is back up and it is never thought of again. In all actuality this is affecting the production more and more with each leak.

The leaks add additional load onto the supply side. The compressor has to generate more air, the dryer needs to process more air, the auto drains dump more moisture, it all ads up to additional wear and tear also known as false load. All of this additional load on the system can add more maintenance which if left undone can result in system shut downs. One way to begin to eliminate this false load is to deploy a leak detection program. The steps are fairly easy.

Similar to our 6 Steps to Compressed Air Optimization, you start with a baseline of how much air the system is seeing and operating pressures. This begins the documentation process which is critical to the success of the program. Next, acquire an ultrasonic leak detector (ULD) and a layout of your compressed air system piping. Utilizing the ULD, test all compressed air piping along with equipment, and tag each leak that is detected. Next, begin to repair all of the tagged leaks and document the amount of compressed air savings with each repair. This again, is more documentation which leads to giving a quantitative value to the return on investment of the program. Lastly, schedule a follow up scan that recurs on a pre-determined basis to prevent the system from returning to it’s original leaky state.

EXAIR Ultrasonic Leak Detector

If you would like to discuss starting a leak detection program in your facility or have questions about the ULD or any point of use compressed air product, please reach out to an Application Engineer today.

Brian Farno
Application Engineer
BrianFarno@EXAIR.com
@EXAIR_BF

Where Does 25 Cents For 1,000 Standard Cubic Feet Of Air Come From?

Wasting compressed air 2

Being an Application Engineer at EXAIR you tend to do a good amount of return on investment (ROI) calculations.   This is mainly to tell customers just how fast installing an EXAIR product on their system is going to pay its purchase price back and start saving them money.

In order to do these calculations there are several variables we must know.   The list is below.

  • Cost of EXAIR Product (This is an easy one for us to know.)
  • EXAIR Product Consumption (Another easy one!)
  • Current Product Consumption (If this is an unknown, we will test it for free!)
  • Cost of Compressed Air / 1,000 SCF (This is the most common unknown.)

With these four variables we can calculate the amount of air and the amount of money the EXAIR product will save over an existing non-engineered blowoff.   Let me address the two variables which have to come from you, the customer.

Current Product Consumption – If this value is not known please don’t guess at it.  We offer a free service which we refer to as our Efficiency Lab where you send us in your existing blowoff device and we will test it for force flow and noise level.   If you don’t know what pressure you are operating the piece at we will help you find out how to get that and then we will test our products at the same pressures.   This way you get a true apple to apples comparison.   Then, once we are done testing, you will get a recommendation from us in a formal report as to what EXAIR product will best replace your existing product.  Then we will pay for return shipping of your blowoff device back to you. So, if you don’t know how much air you are currently using then give us a call.  We will figure it out for you.

Efficiency Lab
The EXAIR Efficiency Lab is FREE!

Cost of Compressed Air/ 1,000 SCF – This is more often than not, the unknown variable in the equation.  The good news is there is a general standard assumption of twenty-five cents per 1,000 Standard Cubic Feet of compressed air.   This works out to be around 8 cents per kW/hr.  So even if you don’t know what you pay to compress the air, if you know what you are paying per kilowatt hour for your energy then we can calculate within reason what it costs for you to generate your compressed air. For reference, 8 cents per kilowatt-hour falls between the average US cost per kilowatt hour for commercial end-users (10.7/kWh) and industrial end-users (6.9/kWh).*

The best part of all is…EXAIR has a calculator available right on our website which provides air and dollar savings per minute, hour day and year as well as a payback in days for the EXAIR product purchase. On top of that, any step along the way that you aren’t sure of, we will help you out for free, even testing your product!

In case you would like to see the math, the formula used is below.

Basic Equation To Go From Cost Per kiloWatt Hour to Cost Per 1,000 Standard Cubic Feet of Compressed Air
Basic equation to go from Cost Per kiloWatt Hour to Cost Per 1,000 Standard Cubic Feet of Compressed Air

Brian Farno
Application Engineer Manager
BrianFarno@EXAIR.com
@EXAIR_BF

*latest U.S. EIA report here