OSHA and the CDC make these statements about noise exposure. Did you know almost 30 million American workers are exposed to dangerous noise levels almost daily, with over 72% of those reported incidents happening in manufacturing environments? Noise induced hearing loss is the second most self-reported occupational injury and since 2004, over 125,00 workers have experienced some level of permanent hearing loss. Excessive noise levels can also reduce productivity, contribute to increased stress levels, communication errors and an irreversible condition called tinnitus or a constant ringing in the ears. In fact, disability claims associated to occupational hearing loss has risen to over $ 242 million per year.
In effort to reduce worker exposure and increase safety, OSHA introduced Standard 29 CFR 1910.95(a). As the standard reads, employees that are subjected to sounds levels in excess of 90 dBA, some type of engineered controls should be implemented by either using some form of PPE – Personal Protective Equipment, i.e. – earplugs, earmuffs, etc. or replacing the loud device altogether with an engineered solution that is designed to reduce the sound level. When a company is found to be in violation of the Standard, OSHA hands down costly fines, in some cases nearing almost $5,000. While providing PPE may seem like the inexpensive, “quick” fix, it actually could lead to more overall cost in the form of fines or claims, as now it is the responsibility of the operator to utilize the equipment provided. The better choice of the 2 options mentioned above, would be to replace with an engineered solution that is designed to lower the sound level.
Take for example, a section of pipe with drilled holes across the length to cover wide area applications or an open end pipe or tube for more focused blowoff, both of which typically produce sound levels in excess of 100 dBA which would limit work exposure to only a couple hours per the above chart.
EXAIR’s Intelligent Compressed Air Products are designed to meet or exceed this standard. Our products entrain large volumes of surrounding air across the profile of the device which helps to reduce wind shear, ultimately lowering the sound level. When considering replacing drilled pipe, take a look at our Super Air Knife. The Super Air Knife produces a much lower sound level at only 69 dBA which is well under the allowable exposure times set forth by OSHA. Depending on the pipe or tube size, these can quickly and easily be replaced with one of our Super Air Nozzles by just adding a fitting to the existing line. For instance, our Model # 1100 Super Air Nozzle, with a sound level of 74 dBA, again falls well within the OSHA Standard.
In addition, we offer our Digital Sound Level Meter to measure sound levels ranging from 35 to 130 dBA. The unit features a backlit LCD display, fast and slow response times, Max hold and includes NIST (National Institute of Standards and Technology) certification.
For assistance in gaining OSHA compliance relating to your compressed air needs, please give us a call.