EXAIR Flat Air Nozzles: Powerful, Quiet, Safe and Adjustable

Are you tired of your current compressed air being so loud? Well then, we have a solution for you; EXAIR’s Flat Super Air Nozzles. The patented design of the 1” and 2” Flat Super Air Nozzles makes it great for applications that require a powerful but precise flat stream of air. The Flat Super Air Nozzles work much like our Super Air Knives, the main difference being that the Flat Super Air Nozzles provides a more forceful stream of air. The design of the Flat Super Air Nozzles also provides a greatly reduced sound level.

2″ Flat Super Air Nozzle

EXAIR’s Flat Super Air Nozzles are safe, reliable, and efficient. The nozzles are specifically designed in a way to prevent dead head pressure as stated in OSHA Standard 1910.242(b). The directive stats that compressed air used for cleaning purposes can not exceed a dead-end pressure of 30 psig. If a dead-end pressure were to exceed that pressure then there is potential for an air embolism to form. EXAIR has designed our Flat Super Air Nozzles so that they cannot be dead-ended; this allows you to run at a typical 80-100 psig from your compressed air system.

Various Applications of Flat Super Air Nozzles

EXAIR Flat Super Air Nozzles are designed to also be quiet while operating at those higher pressures. When operating at 80 psig the 2” Flat Super Air Nozzle is going to have a sound level of 77 dBA were as the 1” Flat Super Air Nozzle when operated at 80 psig is going to have a sound level of 75 dBA. The higher the pressure the more air is going to flow through the nozzle; the more air flowing though the nozzle the louder it is going to be.

2″ Flat Super Air Nozzle

EXAIR’s High Power Flat Super Air Nozzles are designed for those tougher applications where you need more force, and will operate at slightly louder levels. The HP series Flat Super Air Nozzles have a thicker shim in them that allows for more air to escape out the end delivering a high force. The High powered 2” Flat Super Air Nozzle when operated at 80 psig has a sound level of 83 dBA where the 1” is only 82 dBA.

All of EXAIR’s flat Super Air Nozzles are designed with an internal patented shim which allows for adjusting the total volume of airflow and force that the nozzle produces. These shims are available in different thicknesses and aid in keeping noise levels down, provide gross adjustment of airflow and the flexibility for achieving a successful application. 

If you have any questions or want more information on EXAIR’s Flat Super Air Nozzles or any of our products, give us a call, we have a team of application engineers ready to answer your questions and recommend a solution for your applications.

Cody Biehle
Application Engineer
EXAIR Corporation
Visit us on the Web
Follow me on Twitter
Like us on Facebook

Excessive Noise Levels Cost You Health and Money

OSHA and the CDC make these statements about noise exposure. Did you know almost 30 million American workers are exposed to dangerous noise levels almost daily, with over 72% of those reported incidents happening in manufacturing environments? Noise induced hearing loss is the second most self-reported occupational injury and since 2004, over 125,00 workers have experienced some level of permanent hearing loss. Excessive noise levels can also reduce productivity, contribute to increased stress levels, communication errors and an irreversible condition called tinnitus or a constant ringing in the ears. In fact, disability claims associated to occupational hearing loss has risen to over $ 242 million per year.

30mill
Noise Induced Hearing Loss Is One Of The Most Common Occupational Diseases.

In effort to reduce worker exposure and increase safety, OSHA introduced Standard 29 CFR 1910.95(a). As the standard reads, employees that are subjected to sounds levels in excess of 90 dBA, some type of engineered controls should be implemented by either using some form of PPE – Personal Protective Equipment, i.e. – earplugs, earmuffs, etc. or replacing the loud device altogether with an engineered solution that is designed to reduce the sound level. When a company is found to be in violation of the Standard, OSHA hands down costly fines, in some cases nearing almost $5,000. While providing PPE may seem like the inexpensive, “quick” fix, it actually could lead to more overall cost in the form of fines or claims, as now it is the responsibility of the operator to utilize the equipment provided. The better choice of the 2 options mentioned above, would be to replace with an engineered solution that is designed to lower the sound level.

OSHA Noise Level
Noise Level Chart per OSHA Standard 29 CFR 1910.95(a)

Take for example, a section of pipe with drilled holes across the length to cover wide area applications or an open end pipe or tube for more focused blowoff, both of which typically produce sound levels in excess of 100 dBA which would limit work exposure to only a couple hours per the above chart.

EXAIR’s Intelligent Compressed Air Products are designed to meet or exceed this standard. Our products entrain large volumes of surrounding air across the profile of the device which helps to reduce wind shear, ultimately lowering the sound level. When considering replacing drilled pipe, take a look at our Super Air Knife. The Super Air Knife produces a much lower sound level at only 69 dBA which is well under the allowable exposure times set forth by OSHA. Depending on the pipe or tube size, these can quickly and easily be replaced with one of our Super Air Nozzles by just adding a fitting to the existing line. For instance, our Model # 1100 Super Air Nozzle, with a sound level of 74 dBA, again falls well within the OSHA Standard.

sound-level-comparison
Sound Level Comparison

In addition, we offer our Digital Sound Level Meter to measure sound levels ranging from 35 to 130 dBA. The unit features a backlit LCD display, fast and slow response times, Max hold and includes NIST (National Institute of Standards and Technology) certification.

SoundMeter_new_nist225
Model 9104 Digital Sound Level Meter

For assistance in gaining OSHA compliance relating to your compressed air needs, please give us a call.

Justin Nicholl
Application Engineer
justinnicholl@exair.com
@EXAIR_JN