Air Amplifiers – Vent, Exhaust, Cool, Dry, Clean – With No Moving Parts!

As an Application Engineer, one of the interesting aspects of working with customers on applications is the varied types of solutions an EXAIR product can provide.  The Air Amplifier family – Super Air Amplifier, Adjustable Air Amplifier, and the special High Temperature Air Amplifier can be used in a wide variety of process and applications.  Below highlights several of those from past experiences.

A defense contractor was performing maintenance service on a Navy ship, and the ventilation system had to be shut down.  To keep the personnel cool and safe, an auxiliary ventilation was to be supplied.  Rather than use a cumbersome blower assembly, which has to mounted on the top deck, and ducted down to the lower decks, they chose to utilize (2) 4″ Super Air Amplifiers.  They are very portable and can be set up in minutes.  This solution provided the necessary air flow, providing a safe environment for the maintenance crew.

Super Air Amplifier
EXAIR Air Amplifiers use a small amount of compressed air to create a tremendous amount of air flow.

A light bulb manufacturer needed a better solution for a cooling operation.  During manufacturing of a mercury lamp, the bulb must be cooled from 700°C to 600°C in just 15 seconds.  The current method, an open brass pipe, was working but the noise level was too high (95 dBA.) The goal was to maintain the 15 second cooling time, but reduce sound levels to 85 dBA.  By utilizing (2) of 3/4″ Adjustable Air Amplifiers, the customer was able to maintain the cooling rate, and reduce the noise level down to 80 dBA, a 15 dBA reduction.

adjustable Air Amplifier
Adjustable Air Amplifier

A garbage collector presented a problem that needed a solution.  The garbage was incinerated and when the furnaces were first started up, there tended to be issues with getting the flue to draft properly.  Using the High Temperature Air Amplifier, the high velocity air flow and draw provided the needed draft until the stack warmed up and the natural draft would be established.  Since the unit is capable of handling temperatures up to 700°F, it was able to withstand the heat of the process after the compressed air was turned off.

These and other Applications for the Air Amplifiers and all other EXAIR products can be found on the EXAIR website on the Products page, under the Related Info section toward the bottom of each page.

If you have questions regarding Air Amplifiers or any EXAIR Intelligent Compressed Air® Product, feel free to contact EXAIR and myself or one of our Application Engineers can help you determine the best solution.

Brian Bergmann
Application Engineer

Send me an email
Find us on the Web 
Like us on Facebook
Twitter: @EXAIR_BB

Video Blog: Air Entrainment Of An Air Amplifier

The following is a short video explaining how EXAIR’s Super Air Amplifiers work. It also shows the high volume of surrounding air that is pulled into the outlet flow with a very small amount of compressed air required. As yo will see, this high volume of ambient air produces a dramatic effect on the Air Amplifier’s  outlet flow. Super Air Amplifiers are very efficient, quiet and safe and can be used to vent fumes, circulate air, cool, clean and blow off surfaces.

 

 

Justin Nicholl
Application Engineer
justinnicholl@exair.com
@EXAIR_JN

Stainless Steel Adjustable Air Amplifiers Replace Blower in Exhaust Hood Application

Vent hood
EXAIR Stainless Steel Adjustable Air Amplifiers model 6034

 

I was working with our Indonesian distributor the other day on an interesting application in the sugar refining industry.

The application was in a sugar refining plant. As the sugar cane is cooked down, the resulting gas vapor is pulled up through a vent hood and exhausted outside the building. The customer was using a 16” diameter blower to create the needed draft to draw the vapors. The problem is that the vapors are corrosive and sticky when cold. The effect is that the blower blade becomes caked with deposits which, in turn corrode the blade and it must either be cleaned and/or replaced at frequent and regular intervals.

The customer wanted to get away from having to deal with the blower issue if they can, so they turned to our distributor for ideas on how to solve the problem using EXAIR equipment. Turns out that a cluster of (3) model 6034 4” Adjustable Air Amplifiers operating at 5 BARG input pressure are able to generate the necessary flow to replace the blower in this system.

The keys to success in the application were the fact that the Adjustable Air Amplifiers are constructed of Stainless Steel to resist the corrosive effects of the gas vapor. Also, there isn’t any deposits on the blade that need to be dealt with. While cleaning of the Air Amplifiers is recommended in this application, the maintenance interval was able to be much longer between cleanings.

In many industrial applications, blower driven or electric motor driven equipment is usually preferred in an effort to save energy. This was a good example of a case where the quality of having no moving parts was able to offset other maintenance costs that made use of a blower actually more expensive for the user.

Neal Raker, International Sales Manager
nealraker@exair.com
@EXAIR_NR

 

Safety Air Gun Improves Aluminum Extruding Machining Process

I was doing some work around the house Saturday when I heard my wife shouting out from our laundry room….”Something is wrong with our dryer. This is the 3rd time I’ve restarted it and the clothes are still wet!”. Now having been in this situation before, I knew this meant that the exhaust was probably clogged with lint (again).

See, our laundry room runs parallel to our family room and the exhaust ducting goes up and then across the laundry room, across the family room and then exhausts on the side of the house. (I would like to find the person who thought this was a good idea!). I have thought about re-routing the ducting but the only other option would be to have the exhaust on the front of the house which will “never happen” (per my wife). So I usually end up taking my vacuum and attaching as many extensions as possible to reach as much of the ducting as I can. I have tried a few other methods with no success – like taking my leaf blower and, from the outside of the house, blow the lint back towards the laundry room and into a garbage can. (hint: make SURE your wife is not in the laundry room when attempting this…. They don’t react too well when they get covered in lint!)

This made me think of an application I worked on last week with an aluminum extrusion company. The customer cuts lengths of aluminum siding from 1’ up to 10’ in length and, standing at one end of the material, are using a standard blow gun to try and blow out the chips but are unsuccessful. They reviewed our website but were still unsure what product may fit their needs best, so they gave us a call.

We discussed their application and the customer was able to email pictures. After reviewing the pictures I recommended using one of our Soft Grip Safety Air Guns with our Model # HP1125, 2” Flat High Power Super Air Nozzle and a 72” extension.  The Soft Grip Safety Air Gun is constructed of cast aluminum and includes a hook for hanging in a convenient location. The Model # HP1125, 2” High Power Flat Super Air Nozzle, produces 2.2 lbs. of force @ 80 PSIG and utilizes 37 SCFM with a sound level of 83 dBA. This would also meet or exceed the OSHA standards for safety, per Standard 1910.242(b) for 30 psi dead end pressure, and allowable noise exposure per Standard 29 CFR – 1910.95(a).

HP1230
An EXAIR model HP1230 Soft Grip Safety Air Gun

To discuss your application or help with selecting the right product, contact an application engineer.

Justin Nicholl
Application Engineer
justinnicholl@exair.com
@EXAIR_JN

Video Blog: How To Change The Shim Of A Super Air Amplifier

EXAIR’s Super Air Amplifiers increase the volume of air in a blow off, cleaning, venting or cooling application. The air gap is set by a patented shim design which provides the highest amplification ratio in the industry. The patented shim can be changed in order to provide more or less volume and force upon the application. The 3/4″ – 4″ Super Air Amplifiers come with a .003″ shim installed and a .006″ or .009″ shim available when more force and flow are needed. Our largest Super Air Amplifier, the 8″ model, has a .009″ shim installed and has a .015″ shim available when extreme force and flow are necessary.  Check out the video below showing how to change the shim of a Super Air Amplifier.

Lee Evans
Application Engineer
LeeEvans@EXAIR.com
@EXAIR_LE