Promos, Freebies, and Some Amazing Products

Like many companies, here at EXAIR we generally always have a promotional offering.  These rotate throughout the months and this month is no different.  The current offering involves the EXAIR Cold Gun Aircoolant Systems.

These systems help to reduce cutting fluid use, increase production speeds, increase tool life, and has helped more customers than I know.  One customer in particular is a maintenance worker from a welded tube manufacturer.  This facility had very little amount of downtime permitted due to the high efficiency and high volume of orders.  When a machine went down the maintenance team were in like a trauma team to determine the cause of failure and get it remedied to get the line back up and running. One of the biggest problems they would have is when they would have to dry machine a quick part to get the machine back up and running, this would either ruin tools or they would have to slow down the machining time to get the surface finish and dimensions they truly needed.  After talking with us the team ordered a Single Point Cold Gun Aircoolant System as these parts were generally smaller shafts or machine dogs.

They received the system in and sure enough a machine went down.  The crew went to work and once the part needed was found they got to work on their lathe trying to make a new piece.  The Cold Gun held itself straight to the headstock thanks to the integrated magnet and the flexible single point hose kit routed the cold air straight to the cutting point.  They didn’t have to fill up the liquid tank or setup the mist system on the lathe, they simply turned on the compressed air and let the lathe do the work.  They were able to take what had recently been around a three hour machine job with heavy wear on tooling to a two hour job, no finish pass was needed on the part, and their tools weren’t completely spent by the end of the job.

They got the part back into the machine, made adjustments, and then went to work getting the machine back into production.

Right now, if you would like to try out a Cold Gun Aircoolant System you can order before 12/31/2019 and use the link to order through our promotion in order to receive a free Dual Point Hose Kit with your qualified purchase.

Brian Farno
Application Engineer
BrianFarno@EXAIR.com
@EXAIR_BF

The Case for the Cold Gun

Heat is an unavoidable by-product of any cutting or machining operation. Think about it: you’re creating friction on a piece of material with a fast-moving piece of harder material in order to forcibly separate pieces of the original material from its existing shape & size. No matter what, something’s going to get hot: the work piece, the tooling, or (almost always) both. If you don’t do something about it, your parts can become damaged, your tooling can become dull and brittle, and productivity will suffer.

There are ways to alleviate the problem…you can slow the speed of your tooling, but that’s hardly practical, and only marginally effective.  You can use liquid cooling…in fact, you may have to if the particulars of the operation require the lubrication you can only get from a cutting oil or liquid coolant.  But those can be messy, expensive, and the time you spend maintaining the coolant could certainly be spent better elsewhere…like, on machining your products!

The EXAIR Cold Gun Aircoolant System is a novel solution to these problems…heat related and otherwise:

  • The Cold Gun uses compressed air to produce a stream of clean, cold air at 50°F (28°C) below supply air temperature.
  • They use Vortex Tube technology…no moving parts to wear out.
Instant cold air flow with no moving parts!
  • Cold flow and temperature are preset to optimize cooling capability, and are non-adjustable to prevent freeze-up during use.
  • Eliminates the expense of both the purchase & disposal of cutting fluids.
  • Removes the potential for health problems associated with breathing mist & vapors, and the safety issue of slipping on a wet floor.

Cold Gun Aircoolant System selection is easy & straightforward…we offer a standard, and a High Power version to meet your specific needs.

Four systems to choose from, to meet most any need.

We also offer Single & Dual Point Hose Kits, to further meet the needs of your application.  Right now, you don’t have to decide up front…order a Cold Gun Aircoolant System with a Single Point Hose Kit before December 31, 2018, and we’ll throw in the Dual Point Hose Kit for free.

If you’d like to find out more about how Cold Gun Aircoolant Systems can improve your machining or cutting operations, give me a call.

Russ Bowman
Application Engineer
EXAIR Corporation
Visit us on the Web
Follow me on Twitter
Like us on Facebook