I had a customer wanting to reject a container off a conveyor belt. The container held yogurt, and when an optic detected a reject, they wanted to operate a solenoid to have a nozzle blow the container into a reject bin. They had a range that went from 4 oz. (113 grams) for the small containers to 27 oz (766 grams) for the large. He wanted me to suggest one nozzle for all sizes, as they would automatically regulate the pressure for the full range of products. In looking at the largest size, this container will need the most force to blow off the conveyor. The two factors that affects the force in this type of application is weight and friction. When it comes to friction, it is generally an unknown for customers. So, I was able to help with a couple of things to determine the friction force.
Friction is a dimensionless number that represents the resistance created between two surfaces. We have two types; static friction, ms, and kinetic friction, mk. Static friction is the maximum amount of resistance before the object begins to move or slide. Kinetic friction is the amount of resistance that is created when the object is moving or sliding. So, Static friction is always greater than kinetic friction, ms > mk. For this application, we will use an air nozzle to “shoot” horizontally to hit the rejected product.
Let’s take look at our customer’s application. We have a system to reject a non-conforming part with air. The conveyor has a urethane belt. The container is plastic. For the largest container, they have a weight of 27 oz. (766 grams). Being that the conveyor belt is only 12” (30.5 cm) wide, we can determine that if we get the part moving, it will continue off the belt and into the reject bin. The equation for the maximum amount of force required to move a container is below as Equation 1.
Fs = ms * W
Fs – Static Force in ounces (grams)
ms – Static Friction
W – Weight in ounces (grams)
One way to determine the amount of force is to use a scale similar to a fish scale. The scale should have a maximum indicator to help capture the maximum amount of force. You will have to place the object on the same belt material because different types of materials will create different static forces. Keep the scale perpendicular to the object, and slowly pull on the scale. Once the part begins to move, record the scale reading. For the exercise above, it showed 9.6 oz. (271 grams) of force to move the 27 oz. (766 gram) object.
Another way would be to calculate the static friction, ms. Static friction can be found by the angle at which an object starts to move. By placing the container on a section of supported urethane conveyor belt, you can lift one end until the object starts to slide. The height of the lift can be measured as an angle. As an example, we take 3 feet (0.9 meter) of supported urethane conveyor belt, and we lifted one end to a height of 1 foot (0.3 meters) before the 27 oz (766 gram) container moved. To determine static friction, it is the tangent of that angle that you lifted. With some right triangle trigonometry equations, we get an angle of 19.5o. Thus, ms = tanq or ms = tan(19.5o) = 0.354. If we plug this into Equation 1, we get the following:
Imperial Units SI Units
Fs = ms * W Fs = ms * W
= 0.354 * 27 oz. = 0.354 * 766 grams
= 9.6 oz. of force = 271 grams of force
Now that we have the static force, we want to be slightly higher than that. In looking at the force requirements that are published in the EXAIR catalog, it shows that the model 1126 1” Super Flat Air Nozzle has a 9.8 oz. (278 grams) of force at 80 PSIG (5.5 Bar). This force is measured at a 12” (30.5 cm) distance with a patented .015” (0.38mm) shim. So, this nozzle will be able to slide the largest container into the reject bin.
To expand on the benefits in using the EXAIR Flat Super Air Nozzles, the force can be changed easily with a regulator or with a Shim Set. This is a unique feature as most competitive flat nozzles do not allow you to do this. The patented shims control the force rating in a wide range with lower air consumption and lower noise levels; making them safe and efficient. So, if this manufacturer decided to produce other sizes in the future, then they could change the shim to target even larger containers. The flexibility of using the EXAIR Flat Super Air Nozzles allow you to increase or decrease the force by just removing two screws and changing the thickness of the shim inside. EXAIR does offer a pack of shims with different thicknesses which are called a Shim Set.
With air pressure or shim manipulation, the customer could use the same nozzle for the yogurt containers. If you have any applications that need products to be rejected quickly, an Application Engineers at EXAIR will be happy to help you with a solution.
Photo: Yogurt by BUMIPUTRA. Pixabay Licence