EXAIR Products: The Importance of Oil Removal Filters

Oil Removal Filter
Oil Removal Filters

EXAIR’s Intelligent Compressed Air Products have no moving parts and require no maintenance. Most EXAIR products require no direct maintenance, and will continue to require no maintenance if the supplied air is clean. Keeping air clean, in EXAIR’s case, can be done with a simple water/dirt or oil filter separator close to the application of the product – usually within 10 feet. The reason for the filters is that many products have very tight orifices that could get clogged from contaminants such as particulate, condensate, and lubricant.

Oil is commonly present in a compressed air supply, whether that’s intentional or not. Many air compressors are lubricated by a constant supply of oil, inevitably some of this oil ends up in the air supply. As the compressor wears, more oil is permitted to pass and ends up in the distribution system. While this is kept to a minimum with proper maintenance, it is impossible to prevent unless using an oil-free compressor.

Sometimes oil is present in the air supply intentionally. Many pneumatic devices require a precise amount of oil to keep the internal moving parts lubricated. In the case of EXAIR Intelligent Compressed Air Products, we recommend particulate-free, moisture-free, and oil-free air.

EXAIR offers a line of Oil Removal Filters. These coalescing style filters are used to remove very fine water vapor as well as any residual oil. These filters are highly recommended to be installed just prior to dryers that contain a media that would be compromised by lubricant passing through it. Coalescing filters utilize an element typically made up of glass fibers that “coalesce”, or combine, the fine water vapor and oil aerosols until the droplet size becomes large enough that it drops off into the filter bowl. With a coalescing filter, the most common cause of pressure drop increase is due to particulate clogging the element. Because of this, a particulate filter should always be installed just prior to coalescing filters. Check out this video demonstrating an Auto-Drain Filter and Oil-Removal Filter in action:

Without filtration, oil in the air supply will pass through the point of use device and into your product or process. The elimination of this problem is such a simple solution. Don’t neglect your compressed air system and ensure you’re delivering clean, dry, oil-free air to all of your EXAIR Intelligent Compressed Air Products.

Tyler Daniel
Application Engineer
E-mail: TylerDaniel@EXAIR.com
Twitter: @EXAIR_TD

Comparing the Different Styles of Compressed Air Filters

Most of EXAIR’s line of Intelligent Compressed Air Products have no moving parts and require no maintenance. The caveat to the “no maintenance” aspect is proper filtration at the point of use. Many products have very tight orifices that could get clogged from any contaminants such as particulate, condensate, and lubricant. EXAIR recommends point of use filtration to be installed just upstream of any EXAIR Product for this purpose.

There are three primary types of compressed air filters: particulate, coalescing, and adsorption. Each have their own inherent characteristics and can be used in conjunction with one another. Each style is used to handle a different form of contaminant that’s present within the distribution system of your compressed air supply.

9001
EXAIR Model 9001 Auto-Drain Filter

Particulate filters – Particulate filters are available with different filtering mechanisms that allow you to control the particulate size that will be filtered out. The higher the level of filtration, the greater the pressure drop you’ll experience at the outlet of the filter. Styles are also available with either a polycarbonate bowl or metal bowls, depending on the application and environment.

Any filter with a polycarbonate bowl should have a metal guard on the outside to provide protection for personnel should a failure occur. In these styles of filters, compressed air is forced through a filter element that blocks any particulate contained within the air supply.

These filter elements are generally a sintered bronze material with filtration levels from 40-5 micron possible. Over time, the filter elements can clog and increase the pressure drop at the discharge of the filter. They’re relatively inexpensive and should be replaced yearly to maintain optimum performance and mitigate pressure drop. They also remove liquid drops as well from the air supply, containing them within the bowl. Styles with both manual-drains and automatic-drains are available that will drain the bowl of excess moisture automatically through the bottom of the filter.

9005
EXAIR Model 9005 Oil Removal Filter

Coalescing Filters – The coalescing filter is used to remove very fine water vapor as well as any residual oil. These filters are highly recommended to be installed just prior to any dryer that contains a media that would be compromised by any lubricant passing through it. Coalescing filters utilize an element typically made up of glass fibers that “coalesce”, or combine, the fine water vapor and oil aerosols until the droplet size becomes large enough that it drops off into the bowl or filter housing. With a coalescing filter, the most common cause of pressure drop increase is due to particulate clogging the filter element. Because of this, a particulate filter should always be installed just prior to any coalescing filters.

Adsorption Filters – The final type of compressed air filter is the adsorption filter. Where the particulate filters can remove the majority of contaminants and the coalescing filters the residual oil, they are not capable of removing lubricant vapors or oil. That’s where the adsorption filter comes in. In addition to removing the finest oil vapors, they also can eliminate odors from the compressed air supply. The oil vapors and odors adhere to activated carbon within the filter, removing them from the air supply. These filters are commonly found within the food processing industry, where any contaminants in the air supply could impact the integrity of the product.

EXAIR has a line of Automatic Drain Filter Separators and Oil Removal Filters, available from stock, to make sure the quality of your air supply is sufficient for proper operation of any EXAIR product. Feel free to give us a call and any of our Application Engineers will be happy to assist you.

Tyler Daniel
Application Engineer
E-mail: TylerDaniel@EXAIR.com
Twitter: @EXAIR_TD