The word “accessory” can come with some baggage… it’s become synonymous with “add-on” and “up-sell,” and cost-mindful consumers may see them as just another way for a slick salesperson to make an extra buck. And frankly, they wouldn’t have that reputation if there wasn’t some truth to it. The server at your favorite restaurant will offer appetizers, or recommend side dishes to go with your entree. If you go to buy a new car, you’ll get a pitch for a variety of aftermarket add-ons. The paint counter folks at the hardware store always tell me what specific brush and/or rollers I should use with the paint I’m buying…and it’s never the 10-pack of economy brushes that costs less than the single, premium quality brush they recommend. In all of these cases, these employees are trained, constantly encouraged, and hopefully rewarded on the success of these “up-sell” strategies.
Of course, my boys and I can devour even the largest plate of chili cheese nachos long before the rest of meal comes out. My wife absolutely loves the remote starter function that the dealership installed on the new car she bought last year. And, if you’ve ever painted a well-lit room, you know the difference between a $1 paint brush and a $10 paint brush. So if my server gets a little bigger tip, my car dealer salesperson gets a little more commission, or the paint counter folks get a bonus, then it’s a win-win, as far as I’m concerned.
EXAIR carries a variety of accessories for our Intelligent Compressed Air Products. Some aid in mounting & installation:
Others make it easy to ensure adequate supply conditions:
The performance of many EXAIR Intelligent Compressed Air Products can be altered by replacing the shim:
In addition to these product-specific accessories, EXAIR carries a complete line of:
*Filter Separators to remove water, dirt, and rust from your compressed air system. Our Automatic Drain Filter Separators have a 5 micron particulate element, and a centrifugal vane to remove moisture.
*Oil Removal Filters with coalescing elements that remove any trace of oil, and also provide additional particulate filtration to 0.03 microns.
*Pressure Regulators, so you can “dial in” the performance you need, so you don’t overpower the application, or waste compressed air. They come in sizes from 1/4 NPT to 1-1/4 NPT, and are rated for flows up to 700 SCFM. A pressure gauge provides accurate indication of outlet pressure, and the adjustment cap can be removed to prevent tampering.
*Mounting Brackets and Modular Coupling Kits for our Filters and Regulators. The latter are especially handy for easy, compact, and leak free installation.
*Silencing Mufflers to reduce work area noise from compressed air exhausting from pneumatic cylinders, valves, etc. There are several styles to choose from, depending on your needs:
- Sintered Bronze Mufflers are simple in design, with minimal back pressure restriction, and come in sizes from #10-32 thread to 1-1/2 NPT.
- Straight-Through Mufflers offer noise reduction up to 20 dB, and come in sizes from 1/4 NPT (up to 22 SCFM) to 3/4 NPT (up to 73 SCFM.)
- Heavy Duty Mufflers have an internal stainless steel screen that not only protects the exhausting components from environmental contamination, but also keeps air system contaminants from being ejected at high speed into the work area.
- Reclassifying Mufflers are an upgrade to the Sintered Bronze Mufflers and provide the highest level of noise reduction – up to 35 dB. They also trap oil mist, eliminating breathing hazards to personnel.
*Swivel Fittings to securely install & aim many of our nozzles, from the Atto to the High Force 1 NPT Super Air Nozzles. For a little more flexibility, Stay Set Hoses and Magnetic Bases can be used for Air Amplifiers, Super Air Nozzles, and even short Air Knives.
*12 ft Coiled Hoses (1/4″ or 3/8″ ID) and Compressed Air Hose (3/8″ or 1/2″ ID; up to 50ft lengths) can be provided with any Intelligent Compressed Air Product. We also have a full supply of fittings (tees, elbows, nipples, couplers, reducers, etc.) and adapters to fit our Super Air Nozzles to your existing air guns or blow off devices.
*Receiver Tanks are used to store a ready supply of compressed air. If you have an intermittent demand of sufficient size, it can cause a pressure transient in your system, which can drag down the ability to supply other points of use. Installed near the point of intermittent demand, they prevent pressure & volume fluctuations, keeping the operators at all points of use happy. Model 9500-60 Receiver Tank has a capacity of 60 gallons, is rated to 200psig, and meets ASME pressure vessel code.
In closing, let me offer the following advice that’s served me well over the years:
*Be mindful of the valued added by the accessories & add-ons you’re presented during a purchase of capital equipment…or anything else, really. Don’t buy something you don’t need, but if you need it…well…it’s OK to buy it.
*Don’t skimp on quality. Odds are, if an accessory is offered by the manufacturer of the product, it’s going to work well for you. They should be able to tell you if it will or won’t if you discuss your needs with them. I know I will if you call me to discuss a compressed air product application.
*Get the big plate of nachos, especially if you’re dining with teenagers.